| No. | Brand | b | B | e | f | m | s | Q | X |
| NJ322 | NSK | - | 20 mm | - | - | - | - | - | - |
| 42X76X39 | - | - | 36,512 mm | - | - | - | - | - | - |
| hyk2068 | - | - | - | - | - | - | - | - | - |
| 665-A | Bower | - | - | - | - | - | - | - | - |
| HPV091 | Hitachi | - | - | - | - | - | - | - | - |
| 955ISFS8TS8 | - | - | - | - | - | - | - | - | - |
| 27mm | - | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| EN250 | - | - | - | - | - | - | - | - | - |
| 2018 | INA | - | - | - | - | - | - | - | - |
| PC800 | Komatsu | - | - | - | - | - | - | - | - |
| 6922 | - | - | 180 mm | - | - | - | - | - | - |
| 1220*2440 | - | - | - | - | - | - | - | - | - |
| IP20 | - | - | 75 mm | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| (2N-BT53603) | NTN | - | - | - | - | - | - | - | - |
| 30 | - | - | - | - | - | - | - | - | - |
| YF10-16 | - | - | - | - | - | - | - | - | - |
| YAR205-2F | - | - | 140 mm | - | - | - | - | - | - |
| 2005-2008 | Dodge | - | - | - | - | - | - | - | - |
| 12Mm | - | - | 21 mm | - | - | - | - | - | - |
| PV2R1 | YUKEN | - | - | - | - | - | - | - | - |
| 1600 | - | - | - | - | - | - | - | - | - |
| 6305-2RS | fag | - | - | - | - | - | - | - | - |
| TWA1625 | INA | - | - | - | - | - | - | - | - |
| E.1050.20.00.C Slewing Bearing With Outer Gear 834x1046.4x56mm | d:30 mm; Width (mm):17,75; Size (mm):30x55x17.75; Brand:Timken; D:55 mm; T:17,75 mm; Bearing number:NP765903/NP525508; Bore Diameter (mm):30; Outer Diameter (mm):55; |
| 200DBS206y Slewing Bearing | B:14 mm; Width (mm):14; D:30 mm; Outer Diameter (mm):30; Size (mm):17x30x14; Bearing number:GE17UK-2RS; Angle:10 °; Brand:ISO; C:10 mm; Bore Diameter (mm):17; |
| Supply VI 452980N Slewing Bearing 2796*3100*109mm | Basic dynamic load rating (C):140,2 kN; B:38 mm; Brand:ISB; C:38 mm; Basic static load rating (C0):140,2 kN; d:160 mm; D:240 mm; Weight:5,9 Kg; Width (mm):38; Size (mm):160x240x38; |
| 16300001 Internal Gear Slewing Ring Bearings (81.75*62.267*6.5inch) For Utility Derricks | Dimension N:15.0 in; Dimension U:0.2 in; Seal Type:Viton Single Lip; Dimension P:0.9 in; Dimension Y:0.7 in; Cor - Static Load Rating:110381 lbf; Cr - Dynamic Load Rating:87226 lbf; Bearing UPC:013992033383; Note:This product line wa; Shaft Size:105 mm; |
| 011.20.200 Slewing Ring Bearing For Sale | Limiting speed:1100 r/min; D:72 mm; Size (mm):72x36.512x39.5; Basic dynamic load rating - C:25.5 kN; d1:46.1 mm; Thread grub screw G2:M6; B1:39.5 mm; Fatigue load limit - Pu:0.655 kN; Width (mm):39,5; s1:24.5 mm; |
| RKS.060.20.0644 Four Point Contact Slewing Bearings(716*572*56mm) Without Gear For Stacker Crane | Factor fo:14.4; D1 (max):120.2 mm; B:24 mm; Static Load Rating:44,000 N; da (min):79 mm; Limiting Speed - Grease:5,100 rpm; Enclosure:Single Shield with S; a (max):4.1 mm; Cy (max):6.5 mm; d:70 mm; |
| 22 0741 01 Light Series Internal Gear Slewing Ring Bearing(848*649*56mm)for Robot Palletizer | Width (mm):52,388; T:52,388 mm; Bore Diameter (mm):68,262; d:68,262 mm; Outer Diameter (mm):110; D:110 mm; r:0,8 mm; Brand:Timken; Bearing number:399AS/394D+X4S-399A; C:46,038 mm; |
| SD.716.20.00.B Light Type No Gear Slewing Ring(716*572*56mm) For Farm Machinery | d:60,325 mm; C:63,5 mm; T:79,375 mm; R:2,3 mm; Bore Diameter (mm):60,325; Width (mm):79,375; Brand:Timken; D:123,825 mm; r:1,5 mm; Size (mm):60.325x123.825x79.37; |
| 9E-1Z20-0730-1198 Crossed Roller Slewing Bearing With External Gear 634/846/75mm | Factor (Cg):0,0474; overall width:0.6250 in; Size (mm):107.95x165.1x36.512; cone width:1.4375 in; Basic dynamic load rating (Ca90):46,3; Weight:2,62 Kg; T:36,512 mm; D:165,1 mm; Basic dynamic load rating (C90):54,4; C:26,988 mm; |
| CRBS1508 Crossed Roller Bearing | Bearing number:6204HT200ZZ; B:14,000 mm; D:47,000 mm; Size (mm):20x47x14; d:20,000 mm; Width (mm):14,000; Outer Diameter (mm):47,000; C:14,000 mm; Bore Diameter (mm):20,000; Brand:SNR; |
| JXR637050 Crossed Roller Bearing | Characteristic cage frequency, FTF:0.43 Hz; da max:48.9 mm; Width (mm):15,000; Bearing number:6008FT150ZZ; Static load, C0:11.5 kN; Mass:0.19 kg; C:15,000 mm; Brand:SNR; Outer Diameter (mm):68,000; Nref:11,000 rpm; |
| 16321001 No Gear Slewing Ring Bearings (35.312*26.625*2.953inch) For Military Turrets | C0 - Static Radial Rating:308000 lbf; db - Cone Backface Backing Diameter:9.25 in; Cage Type:Stamped Steel; Cone Part Number:M244249DGW; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:23100 lbf; Design Units:Imperial; Series:M244200; Cg - Geometry Factor8:0.136; C1 - Dynamic Radial Rating (1 million revolutions)1:156000 lbf; B - Double Cone Width:4.5625 in; |
| A12-34P2B No Gear Slewing Bearings(39.8*29.65*3.25inch) For Clarifiers And Thickeners | Product Group:B00308; Basic static load rating - C0:8.3 kN; maximum rpm:19000 RPM; Calculation factor A:0.00141; Calculation factor - Y2:0.57; d:17 mm; rb - max.:0.6 mm; Number of Rows of Balls:Single Row; r1,2 - min.:1 mm; |
| SD.1400.32.00.C Four-point Contact Ball Slewing Bearing 1105mmx1400mmx90mm | A2:34,5 mm; s:8,5 mm; Bore Diameter (mm):35; Thread (G):M6x1; A:34 mm; d:35 mm; Weight:1,6 Kg; L:135 mm; B1:32 mm; e:11 mm; |
| 07 0380 01 Slewing Ring Bearing | Manufacturer Name:SKF; Brand:SKF; Product Group:M06110; UNSPSC:31171560; r min.:1.5 mm; D - Outer Diameter:72 mm; d1:63.7 mm; C:23 mm; EAN:7316570468908; D1:80.3 mm; |
| 01-2040-03 External Gear Slewing Ring Bearing(2165*1950*68mm)for Construction Machinery | Fw:18 mm; Outer Diameter (mm):22; Width (mm):17; Size (mm):18x22x17; Bore Diameter (mm):18; Bearing number:K18x22x17; Brand:ISO; B:17 mm; Ew:22 mm; |
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
23 0841 01 Light Series No Gear Slewing Ring(948*734*56mm)for Bending Robot Video