| No. | Brand | b | B | e | f | m | s | Q | X |
| 6004 | fag | - | 39,67 mm | - | - | - | - | - | - |
| 51205 | Rollway | - | - | - | - | - | - | - | - |
| H-4WEH22E74/6EW | Rexroth | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 1800 | - | - | - | - | - | - | - | - | - |
| 61804-2RZ | SKF | - | - | - | - | 12 mm | - | - | - |
| 3-SKF-Bearing, | SKF | - | 19,05 mm | - | - | - | - | - | - |
| 21 | INA | - | - | - | 0,85 mm | - | - | - | - |
| EX120-2 | Hitachi | - | 20 mm | - | - | - | - | - | - |
| (HBF006) | - | - | 112 mm | - | - | - | - | - | - |
| MFB160/170/180 | - | - | - | - | - | - | - | - | - |
| 6203 | - | - | - | - | - | - | - | - | - |
| Se12 | - | - | 64 mm | - | - | - | - | - | - |
| NUP2320 | NSK | - | 8 mm | - | - | - | - | - | - |
| 7004 | SKF | - | - | - | - | - | - | - | - |
| HMV110 | - | - | - | - | - | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - | - |
| 31315J2 | SKF | - | 12 mm | - | - | - | - | - | - |
| 19676 | - | - | - | - | - | - | - | - | - |
| 250rpm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| HSR-30 | thk | - | - | - | - | - | - | - | - |
| 50 | INA | - | - | - | - | - | - | - | - |
| UCFUX-2.3/16M | NTN | - | 23 mm | - | - | - | - | - | - |
| RKS.951145101001 | - | - | - | - | - | - | - | - | - |
| GNX250 | - | - | 73,025 mm | - | - | - | - | - | - |
| ABEC-7 | - | - | 95 mm | - | - | - | - | - | - |
| ATC200X | - | - | 80 mm | - | - | - | - | - | - |
| 19PC | - | - | 29.000 mm | - | - | - | - | - | - |
| 16321001 No Gear Slewing Ring Bearings (35.312*26.625*2.953inch) For Military Turrets | C0 - Static Radial Rating:308000 lbf; db - Cone Backface Backing Diameter:9.25 in; Cage Type:Stamped Steel; Cone Part Number:M244249DGW; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:23100 lbf; Design Units:Imperial; Series:M244200; Cg - Geometry Factor8:0.136; C1 - Dynamic Radial Rating (1 million revolutions)1:156000 lbf; B - Double Cone Width:4.5625 in; |
| RKS.161.14.0414 Crossed Roller Slewing Bearings(503.3*344*56mm) With External Gear For Industrial Automation | Designation SKF:VKBA 1480; Designation FAG:713678050; Compatibility:FORD / COUGAR / eng; Bearing number:CX057; Designation SNR:R152.42; Brand:CX; Designation Ruville:5242; |
| VSI200744 Bearing 648*816*56mm | Bore Diameter (mm):35; B:36 mm; D:55 mm; C:36 mm; Brand:ISO; Width (mm):36; Bearing number:NA6907; Fw:42 mm; Size (mm):35x55x36; d:35 mm; |
| XRA13008 Cross Roller Bearing Size 130x146x8mm | B:14,000 mm; Size (mm):10x30x14; Width (mm):14,000; D:30,000 mm; Outer Diameter (mm):30,000; Brand:SNR; Bore Diameter (mm):10,000; Bearing number:62200EE; C:14,000 mm; d:10,000 mm; |
| VA703765N Four Point Contact Ball Slewing Bearing 3580x4048x154mm | Cor - Static Load Rating:36179 lbf; Support Type:Four-Bolt Plummer Bl; Bearing Number:LSE300BX; Pillow/Plummer Block Style:Split Cylindrical Ho; Housing Width:4.4 in; Bearing Type:Split Cylindrical Ex; Dimension J2 :9-7/8 in; Bearing UPC:013992026156; Shaft Size:3 in; Cr - Dynamic Load Rating:31041 lbf; |
| MMXC1018 Crossed Roller Bearing | Category:Single Row Ball Bear; da max.:13.5 mm; Bore:0.472 Inch | 12 Mill; Precision Class:ABEC 1 | ISO P0; Enclosure:2 Metal Shields; Noun:Bearing; da min.:13.5 mm; Width (mm):4; Size (mm):18x12x4; |
| SX011840 Crossed Roller Bearing | D:130 mm; dc(min):-; C:46 mm; Db(min):-; Bore Diameter (mm):60; r min.:2.1 mm; B2:-; Oil lub.:6200; Db(max):-; Fw:77 mm; |
| 9E-1Z20-0474-0100 Crossed Roller Slewing Rings 380/589.5/75mm | Basic dynamic load rating (C):1630 kN; Calculation factor (Y1):2,03; Size (mm):220x370x120; Basic static load rating (C0):2900 kN; Weight:62,4 Kg; da min.:237 mm; d1:200 mm; Bearing number:23144-B-K-MB+AH3144; Limiting speed:1 400 r/min; D:370 mm; |
| AT14316 Slewing Bearing With Outer Gear 715x976x98mm | Characteristic rolling element frequency, BSF:4.05 Hz; Nlim:15,000 rpm; Bearing number:6202E; da min:19 mm; d:15,000 mm; da max:19.7 mm; Da max:31 mm; D:35,000 mm; B:11,000 mm; d1:19.7 mm; |
| I.955.25.00.B Slewing Bearing With Internal Gear 710x955x80mm | Bore Diameter (mm):41,3; D:82,5 mm; Outer Diameter (mm):82,5; d:41,3 mm; Width (mm):23,2; Brand:NTN; Bearing number:EC0-CR-08B59STPX1V2; Size (mm):41.3x82.5x23.2; |
| S8-56E1 Single Row Vertical Thrust Slewing Bearings(60.867*52.5*2.88inch) For Stationary And Mobile Cranes | Brand:NACHI; a:24.4 mm; 2B:62 mm; Bearing number:7312BDF; Width:31 mm; Da1 (max):118 mm; Da max.:123 mm; Size (mm):60x130x31; Weight:1.81 Kg; d:60 mm; |
| High Quality XI 401945N Cross Roller Bearing 1722*2088*110mm | Basic static load rating (C0):32,5 kN; Outer Diameter (mm):145; (Oil) Lubrication Speed:10 000 r/min; (Grease) Lubrication Speed:7 500 r/min; B:24 mm; D:145 mm; r1 min.:1 mm; Brand:NTN; Width (mm):24; Basic dynamic load rating (C):42,5 kN; |
| 16344001 External Gear Slewing Ring Bearings (63.15*47.84*5.118inch) For Wind Turbines | D:72 mm; Width (mm):21,5; Bore Diameter (mm):35; Bearing number:RW207CCR; C:21,5 mm; Outer Diameter (mm):72; Brand:PFI; d:35 mm; Size (mm):35x72x21.5; B:21,5 mm; |
| SX011880 Crossed Roller Bearing | B:33 mm; D:140 mm; Size (mm):55x140x33; Basic static load rating (C0):138 kN; Basic dynamic load rating (C):142 kN; d:55 mm; (Grease) Lubrication Speed:4600 r/min; Width (mm):33; C:33 mm; Bearing number:NP411; |
| 12-201091/1-02273 Slewing Bearing With Internal Gear 984/1166/56mm | Da (max):50 mm; Bore Type:Cylindrical Bore; D:52 mm; B:7 mm; Radial Clearance:0.015 to 0.033 mm; Enclosure:Single Shield with S; Snap Ring Width:0.9 mm; Weight:0.034 kg; Limiting Speed - Grease:12,000 rpm; a (max):1.3 mm; |
| Good Performance XIU25/980 Cross Roller Bearing 840*1082*73mm | Weight / LBS:1.39; Basic static load rating C0:7.8 kN; Basic dynamic load rating - C:14 kN; Seals:M Seal; Number of Mounting Holes:2; Manufacturer Name:SKF; Mounting Bolts:11 Millimeter; A2:12 mm; operating temperature range:-30 to +120 &de; |
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
22 0411 01 Light Series Internal Gear Slewing Ring Bearing(518*325*56mm)for Robot Palletizer Video