| No. | Brand | b | B | e | f | m | s | Q | X |
| F693ZZ | - | - | - | - | - | - | - | - | - |
| 0-10V | - | - | - | - | - | 0,154 kg / Weight | - | - | - |
| 6008/C3 | SKF | - | - | - | - | - | - | - | - |
| 3 | INA | - | 36,512 mm | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 1985-1987 | koyo | - | - | - | - | - | - | - | - |
| Ip65 | - | - | - | - | - | - | - | - | - |
| 1985-1988 | Timken | - | - | - | - | - | - | - | - |
| A10vso140 | Rexroth | - | - | - | - | - | - | - | - |
| R900713237 | Rexroth | - | 125 mm | - | - | - | - | - | - |
| 6003 | - | - | 16 mm | - | - | - | - | - | - |
| 15 | - | - | 27,78 mm | - | - | - | - | - | - |
| SL185030-A-C3 | INA | - | - | - | - | - | - | - | - |
| 5GG77 | - | - | 20 mm | - | - | - | - | - | - |
| NUTR45100 | INA | - | - | - | - | - | - | - | - |
| (2) | - | - | 41 mm | - | - | - | - | - | - |
| Q9 | - | - | 23 mm | - | - | - | - | - | - |
| 160 | - | - | - | - | - | - | - | - | - |
| CSK20PP | - | - | - | - | - | - | - | - | - |
| 9306KDD | FAFNIR | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - | - |
| OSB3 | INA | - | - | - | - | - | - | - | - |
| 2 | Nachi | - | - | - | - | - | - | - | - |
| QJ320 | - | - | - | - | - | - | - | - | - |
| 10043-01-3 | - | - | - | - | - | - | - | - | - |
| 5.0-7.0t/H | - | - | - | - | - | - | - | - | - |
| 1220X2440mm | - | - | - | - | - | - | - | - | - |
| G10 | - | - | - | - | - | - | - | - | - |
| 60% | - | - | - | - | - | - | - | - | - |
| VSA201094-N Light External Gear Type Slewing Ring Bearing(1198*1022*56mm)for Industial Automation | S:19 mm; Weight:3,5 Kg; Width (mm):49,2; (Refer.)Unit mass(kg):3.5; C0r:20.3; Cr:32.7; Nipple size:1/4-28UNF; Bore Diameter (mm):40; H1:21 mm; N:20 mm; |
| I.1100.32.00.C Slewing Bearing With Internal Gear 812x1100x90mm | Size (mm):12x32x10; Bearing number:6201LT; D:32,000 mm; C:10,000 mm; Brand:SNR; B:10,000 mm; d:12,000 mm; Width (mm):10,000; Outer Diameter (mm):32,000; Bore Diameter (mm):12,000; |
| VU130225 Bearing 200*290*24mm | Mass bearing:2.7 kg; D4:182.9 mm; D2 ≈:151.3 mm; ra max.:2 mm; Outer Diameter (mm):95; Bearing number:219 NR; ba - min.:4 mm; D:170 mm; Db min.:185 mm; da - min.:107 mm; |
| VSU250955 Slewing Ring Bearing(1055*855*63mm)for Stacker Crane | C:36 mm; Bearing number:6221ZZ; d:105 mm; B:36 mm; Outer Diameter (mm):190; Bore Diameter (mm):105; Brand:CRAFT; D:190 mm; Size (mm):105x190x36; Width (mm):36; |
| RKS.060.20.1094 Four Point Contact Slewing Bearings(1166*1022*56mm) Without Gear For Stacker Crane | Basic dynamic load rating (C):8,83 kN; Bearing number:BHA 810 Z; Bore Diameter (mm):12,7; Weight:0,0125 Kg; C:15,88 mm; Size (mm):12.7x19.05x15.88; D:19,05 mm; Brand:IKO; Basic static load rating (C0):10,9 kN; Fw:12,7 mm; |
| L6-43N9Z Slewing Rings(47.17*39.13*2.2inch) With Internal Gears For Excavators And Ladle Turrets | Size (mm):60x110x38.3; C:11,5 mm; r2 min.:1,1 mm; da min.:90 mm; H:38,3 mm; Fatigue load limit (Pu):8,3; Width (mm):38,3; d:60 mm; Outer Diameter (mm):110; D1:62 mm; |
| RK6-16N1Z Internal Gear Slewing Ring Bearings (20.39*12.85*2.205inch) For Rotary Tables | Dimension V:6.0 in; Dimension H:1.7 in; Dimension N:13.5 in; Bearing - Housing - Seal:MSE304BRHATL; Maximum Speed:2520 rpm; Dimension U:0.2 in; Dimension B:8.0 in; Bearing Type:Split Cylindrical Re; Cr - Dynamic Load Rating:66768 lbf; Series Type:Medium Series; |
| L6-29N9ZD Slewing Rings(33.39*25.6*2.2inch) With Internal Gears For Excavators And Ladle Turrets | Brand:CX; Compatibility:MITSUBISHI / GALANT; Bearing number:CX139; |
| Crossed Roller Slewing Bearing RKS.160.14.0644 | Outer Diameter (mm):85; (Grease) Lubrication Speed:22 100 r/min; D:85 mm; Basic dynamic load rating (C):14 kN; Brand:NSK; d:60 mm; Bearing number:60BER29HV1V; Weight:0,208 Kg; C:16 mm; Bore Diameter (mm):60; |
| Slewing Bearing ZKLDF395 395*525*65mm | Weight:618.000 kg; Retainer Material:Machined Brass; Center Guidance:Fixed Inner Ring Rib; Dynamic Load Rating:9,300,000 N; Static Load Rating:17,000,000 N; Configuration:Double Row; Axial Load Factor Y0:4.13; d:900 mm; ra (max):5 mm; Axial Load Factor Y1:4.22; |
| RK6-33E1Z External Gear Slewing Ring Bearings (37.2*28.9*2.205inch) For Stretch Wrapping Machines | L3:215 mm; A1:38 mm; L1:235 mm; d:110 mm; N:65 mm; H2:185 mm; Bearing number:UCT322; Brand:NACHI; A2:80 mm; L5:387 mm; |
| Hot Sale XA 180307N Slewing Bearing 235*408.4*55mm | D:72 mm; d:33,338 mm; T:19 mm; Brand:CX; Bearing number:26131/26283; (Grease) Lubrication Speed:5600 r/min; Size (mm):33.338x72x19; Bore Diameter (mm):33,338; Basic static load rating (C0):60,1 kN; Basic dynamic load rating (C):54,4 kN; |
| CRBH10020 A Bearing | r min.:1 mm; Size (mm):30x55x13; Basic static load rating (C0):8,3 kN; Da max.:50 mm; da min.:35 mm; Width (mm):13; Weight:0,11 Kg; Bearing number:AC-6006ZZ; B:13 mm; Bore Diameter (mm):30; |
| HT10-42P1Z No Gear Slewing Ring Bearings (48*36*3.5inch) For Lift Truck Rotators | Outer Diameter (mm):73; Bearing number:SA0015; C:40 mm; Size (mm):38x73x40; Bore Diameter (mm):38; d:38 mm; D:73 mm; B:40 mm; Width (mm):40; Brand:FAG; |
| VU250380 Bearing 275*485*55mm | Brand:Timken; d:87,312 mm; D:123,825 mm; Width (mm):50,797; C:42,862 mm; R:1,5 mm; Size (mm):87.312x123.825x50.79; T:50,797 mm; r:0,8 mm; Bore Diameter (mm):87,312; |
| 1797/1250G2 Slewing Bearing 1250x1548x148mm | D:160 mm; Outer Diameter (mm):160; Bore Diameter (mm):110; Bearing number:GE110ES; Brand:CRAFT; Size (mm):110x160x70; B:70 mm; d:110 mm; Width (mm):70; |
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
21 0841 01 Light Series External Gear Slewing Ring Bearing(950*734*56mm)for Stacking Robot Video