| No. | Brand | b | B | e | f | m | s | Q | X |
| 220g | INA | - | - | - | - | - | - | - | - |
| N25% | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| Pc300-8 | - | - | 23 mm | - | - | - | - | - | - |
| 360 | - | - | - | - | - | - | - | - | - |
| 2648# | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| N21% | - | - | 110 mm | - | - | - | - | - | - |
| ISO4706 | - | - | - | - | - | - | - | - | - |
| 6908-ZZ | - | - | 31 mm | - | - | - | - | - | - |
| 6016N | fag | - | - | - | - | - | - | - | - |
| 2002-2009 | NSK | - | - | - | - | - | - | - | - |
| 60% | INA | - | 16 mm | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| 32309M | Timken | - | 36 mm | - | - | - | - | - | - |
| 48w | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 2003 | NSK | - | 100 mm | - | - | - | - | - | - |
| 5ml | - | - | 13 mm | - | - | - | - | - | - |
| 1pc | - | - | 23 mm | - | - | - | - | - | - |
| 4D88 | - | - | 2 mm | - | - | - | - | - | - |
| SMHA1155610819S2I65A7 | Parker | - | - | - | - | - | - | - | - |
| 92-321255/1-06245 Slewing Bearing With Internal Gear 1112/1400/90mm | D:135 mm; rmin:1,1 mm; nG:2900 1/min / Limitin; D1:93 mm; ra max:1 mm; m:1,7 kg / Weight; A:0,53 / Factor min. l; Outer Diameter (mm):135; Bearing number:53218; |
| 4789/570 Slewing Bearing 570x852x96mm | Bearing number:6213-2RS; Max. Shaft Shoulder Dia. Inner (Ui):80.0; Max Speed (Grease) (X1000 RPM):4; Bore Diameter (mm):65; Width (mm):23; Max Speed (Oil) (X1000 RPM):6; Radius (min) (rs):1.500; Bore Dia (d):65.0000; Ball Dia (Dw):16.6690; Size (mm):65x120x23; |
| RB30040 XRB30040 Cross Roller Bearing Size 300x405x40 Mm RB 30040 XRB 30040 | D:80 mm; Outer Diameter (mm):80; Angle (α):20 °; r min.:1 mm; (Grease) Lubrication Speed:16 000 r/min; d:50 mm; a:19,8 mm; Basic dynamic load rating (C):11,1 kN; Basic static load rating (C0):7,65 kN; Width (mm):16; |
| RKS.121395101002 Crossed Roller Slewing Bearings(695*477*77mm) Without Gear Teeth For Medical Equipment | Brand:NACHI; Basic dynamic load rating (C):81,5 kN; Bore Diameter (mm):60; r:3.5 mm; Ca:11.5 mm; Thread (G):M12×1.5; S:26 mm; Size (mm):60x130x71; d1:82.5 mm; Width (mm):71; |
| Crossed Roller Slewing Bearing With Internal Gear RKS.312410101001 | Fatigue load limit - Pu:216 kN; Bearing number:NJ 2336 ECML; s max.:10.5 mm; d1 ≈:248 mm; Limiting value e:0.3; Width (mm):126; ra max.:3 mm; Fatigue load limit Pu:216 kN; Calculation factor kr:0.38; s:10.5 mm; |
| 35 mm x 72 mm x 23 mm 06 0400 00 Slewing Ring Bearing | Cg - Geometry Factor8:0.107; Y1 - ISO Factor5:2.02; G1 - Heat Generation Factor (Roller-Raceway)7:264; Da - Cup Frontface Backing Diameter:6.86 in; Y2 - ISO Factor6:3; r - Cup Frontface To Clear Radius2:0.06 in; K - Factor3:1.74; e - ISO Factor4:0.33; Series:855; Y - ISO Factor1:1.79; Size (mm):35 mm x 72 mm x 23 mm ; |
| XA200352 Bearing 274*462*59mm | Outside Diameter:2.047 Inch | 52 Mill; Cr:39.3; Calculation factor (e):0,37; Bore:0.984 Inch | 25 Mill; Da max.:46,5 mm; C0r:33.7; da(min):30.5; Grease lub.:7800; da max:31 mm; Assembly Width:0.64 Inch | 16.25 Mi; |
| VI160288 Bearing 216*340*39mm | Dynamic Load Rating:465,000 N; ra (max):2.5 mm; dc (min):171 mm; d:140 mm; Configuration:Single Row; Fillet Radius/Chamfer:3 mm; Radial Clearance:0.060 to 0.105 mm; Da (max):236 mm; r1:3 mm; dd (min):182 mm; |
| 9O-1Z16-0384-0219 Crossed Roller Slewing Rings 304/465/50mm | B:19,05 mm; Outer Diameter (mm):317,5; r(min):2; Width (mm):19,05; Brand:KOYO; r:2 mm; Bearing No.:KFX110; Bore Diameter (mm):279,4; d:279,4 mm; D:317,5 mm; |
| CRBC6013UU Crossed Roller Bearing | Basic dynamic load rating (C):4,729 kN; B:7 mm; C:7 mm; D:47 mm; Brand:ZEN; Bearing number:61807; d:35 mm; Size (mm):35x47x7; Basic static load rating (C0):3,821 kN; Outer Diameter (mm):47; |
| AT18303 Slewing Bearing With Outer Gear 915x1136x70mm | Grease Lubrication - T Seal:1200 rpm; Dimension D Max:13.38 in; Adapter Sleeve Axial Movement Min:0.03 in; Adapter Sleeve Axial Movement Max:0.042 in; Oil Lubrication - T Seal:1700 rpm; Dimension D Min:10.88 in; Shaft Size :100 mm; Grease Lubrication - B/C/O Seal:600 rpm; Y2 - Geometry Factor:4.06; Dimension F:14.88 in; |
| L6-37E9ZD Slewing Rings(41.2*32.83*2.2inch) With External Gears For Mining And Forestry Equipment | Basic dynamic load rating (C):15,6 kN; Bearing number:J-1212; Brand:NSK; D:25,4 mm; Bore Diameter (mm):19,05; Weight:0,02 Kg; Size (mm):19.05x25.4x19.05; Outer Diameter (mm):25,4; Width (mm):19,05; C:19,05 mm; |
| E.1200.20.00.C Slewing Bearing With Outer Gear 984x1198.4x56mm | da min:52 mm; (Grease) Lubrication Speed:8 700 r/min; D:85 mm; Brand:NTN; Minimum Buy Quantity:N/A; r1a max:0.6 mm; Product Group:B04270; db min:49,5 mm; Rolling Element:Ball Bearing; Noun:Bearing; |
| High Quality XSI 201355N Cross Roller Bearing 1210*1455*80mm | Outer Diameter (mm):85; db - min.:91 mm; C1:11.1 mm; Calculation factor - fHC:1; da min.:91 mm; Da max.:124 mm; d:85 mm; D:130 mm; r3,4 min.:0.6 mm; |
| 585DBS102y Four-point Contact Ball Slewing Bearing With Innter Gear | Bearing number:23068-K-MB-W33; Size (mm):340x520x133; Calculation factor (Y1):2,7; D:520 mm; Limiting speed:1300 r/min; B:133 mm; Brand:NKE; d:340 mm; r2 min.:5 mm; Calculation factor (Y0):2,6; |
| 9E-1Z30-0980-16 Crossed Roller Slewing Rings 868/1144/100mm | Dimension B2:0.531 in; Dimension S1:26.9 mm; Set Screw Size:1/4-20; Dimension M:0.142 in; Center of Bearing from End S:17.5 mm; Weight:0.50 lb; Sub Series:G1…KPPB2,3,4; Outside Diameter D:2.047 in; Material:Bearing Steel; Number of Set Screws:2; |
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
31 0941 01 Light Series Solid Section External Gear Slewing Bearing(1046*872*56mm)for Handling Manipulator Video