| No. | Brand | b | B | e | f | m | s | Q | X |
| 1200X1200mm | - | - | 44,45 mm | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | 918 kg / Weight | - | - | - |
| (Zhv28) | - | - | 35 mm | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 804312A | - | - | - | - | - | - | - | - | - |
| 2x | - | - | - | - | - | - | - | - | - |
| 600 | fag | - | - | - | - | - | - | - | - |
| 12Mm | - | - | 21 mm | - | - | - | - | - | - |
| 3FT/4FT/5FT/6FT | - | - | - | - | - | - | - | - | - |
| FE17180 | - | - | - | - | - | - | - | - | - |
| MF104-2RS | - | - | 69.44 mm | - | - | - | 7.37 mm | 1.22 mm | - |
| SL185030-A-C3 | INA | - | - | - | - | - | - | - | - |
| 4.8mm | - | - | - | - | - | - | - | - | - |
| 708-2G-00700 | - | - | - | - | - | - | - | - | - |
| 6805 | - | - | 163 mm | - | - | - | - | - | - |
| 2019 | - | - | 20 mm | - | - | - | - | - | - |
| N312 | NSK | - | - | - | - | - | - | - | - |
| 6020 | NSK | - | - | - | - | - | - | - | - |
| Tnb-1e | - | - | - | - | - | - | - | - | - |
| RAK1 | Timken | - | 72 mm | - | - | - | - | - | - |
| CRF450X, | - | - | 64 mm | - | - | - | - | - | - |
| 309S | TRW | - | - | - | - | - | - | - | - |
| (4 | - | - | - | - | - | - | - | - | - |
| hyk2068 | - | - | - | - | - | - | - | - | - |
| 6% | - | - | - | - | - | - | - | - | - |
| HSR20 | thk | - | 18 mm | - | - | - | - | - | - |
| Bearing,Ball,3/4" | NTN | - | - | - | - | - | - | - | - |
| XSU140914 Bearing 874*1014*56mm | Width (mm):25; Inventory:0.0; Snap Ring:No; Outside Diameter:5.118 Inch | 130 Mil; Reference speed:9000 r/min; Internal Special Features:No; da max.:92 mm; d1:92.05 mm; Calculation factor - kr:0.04; d1 ≈:92.05 mm; |
| RKS.22.0841 L-shape Range Internal Gear Slewing Ring Bearing(948*736*56mm) For Bending Robot | Basic dynamic load rating (C):210 kN; Bore Diameter (mm):130; D:200 mm; Outer Diameter (mm):200; d:130 mm; Angle (α):15 °; Basic static load rating (C0):274 kN; Brand:CX; Size (mm):130x200x66; Bearing number:7026 C-UD; |
| Offer XA 402130N Slewing Bearing 1965*2381.4*118mm | Da max.:159 mm; r min.:2,1 mm; Width (mm):39; C:39 mm; d:80 mm; Bore Diameter (mm):80; B:39 mm; Basic static load rating (C0):130 kN; Weight:4,08 Kg; Outer Diameter (mm):170; |
| XSU140414 Bearing 344*484*56mm | D:90 mm; Da max.:84 mm; r min.:1 mm; Basic static load rating (C0):13,2 kN; ra max.:1 mm; Bearing number:65BNR19H; b:0,5 mm; Weight:0,181 Kg; a:19,1 mm; Basic dynamic load rating (C):15,2 kN; |
| 10-200311/0-02002 Four-point Contact Ball Slewing Bearing 242mmx386mmx56mm | Seal Type:Felt Type; Maximum Speed:760 rpm; Cr - Dynamic Load Rating:374307 lbf; Cor - Static Load Rating:551906 lbf; Housing Width:11.7 in; Dimension J:29.0 in; Bearing Number:HSM220BR; Bearing Type:Split Cylindrical Re; Dimension H2:28.7 in; Bearing UPC:013992024053; |
| RKS.161.14.0944 Crossed Roller Slewing Bearings(1046*874*56mm) With External Gear For Industrial Automation | Brand:NTN; Width (mm):16; d:45 mm; Angle (α):25 °; Weight:0,26 Kg; Size (mm):45x75x16; C:16 mm; D:75 mm; Bearing number:5S-2LA-BNS009ADLLBG/; Outer Diameter (mm):75; |
| SSF0751/22CHHⅡ Slewing Bearing For 5T Excavator Machine | Bore Diameter (mm):45; Bearing number:SA45ET-2RS; h:163 mm; Thread (G):M42×3; d2:102 mm; d:45 mm; l7 min.:52 mm; Basic dynamic load rating (C):225 kN; l2 max.:214 mm; dk:60 mm; |
| CRBH6013A Crossed Roller Bearing 60X90X13mm | Size (mm):25x52x15.24; Width (mm):15,24; Outer Diameter (mm):52; Bore Diameter (mm):25; D:52 mm; d:25 mm; E:15,57 mm; B1:15,88 mm; B:15,24 mm; Basic dynamic load rating (C):16 kN; |
| SSF1620/60 Slewing Bearing For 70T Crawler Crane | K - Factor2:1.39; C1 - Cup Flange Width:0.3750 in; Da - Cup Frontface Backing Diameter:8.54 in; Y - ISO Factor4:1.43; Cg - Geometry Factor5:0.135; Series:895; r - Cup Backface To Clear Radius1:0.130 in; Design Units:Imperial; Cup Part Number:892-B; D1 - Flange Outer Diameter:9.3710 in; |
| XRB70045 Cross Roller Bearing Size 700x815x45mm | B:33,34 mm; C:25 mm; D:100 mm; Bore Diameter (mm):45,34; Basic dynamic load rating (C):48,8 kN; Outer Diameter (mm):100; d:45,34 mm; Size (mm):45.34x100x33.34; Width (mm):33,34; Weight:0,916 Kg; |
| Crossed Roller Slewing Bearing RKS.160.14.1094 | Basic dynamic load rating (C):4,3 kN; l7 min.:— mm; l1 min.:22 mm; Bore Diameter (mm):6; Bearing number:SABP6S; B:9 mm; Weight:0,026 Kg; d:6 mm; Brand:LS; Angle:13 °; |
| XSI140844-N Cross Roller Slewing Ring Bearing For Handling Systems | Outside Diameter:0.63 Inch | 16 Milli; Relubricatable:No; Separable:No; C0r:6.08; Other Features:2 Rib Outer Ring | D; rs(min):0.4; (Refer.)Mass(kg):0.006; Basic static load rating (C0):6.08 kN; Oil lub.:28000; Category:Needle Non Thrust Ro; |
| 9E-1B17-0235-0182 Slewing Bearing With External Gear Teeth 171x318.6x40mm | Assembly Weight:245.000 lb; Seal Type:Triple Ring Seal; Full Timken Part Number:SAF226264-1/2; Diameter S-1:4 1/2 in; B:22.00 in; Triple Seal 2 Req’d:LOR 118; Bearing Number:22326K; A:6.6875 in; Bolt Hole Length:1.9375 in; D:2.6250 in; |
| SD.486.20.00.B Four-point Contact Ball Slewing Bearing 342mmx486mmx56mm | J:5,13 mm; S:12,7 mm; Outer Diameter (mm):47; M:3,43 mm; D:47 mm; Thread (G):M5X0,8; F:27,56 mm; d:19.05 mm; Bore Diameter (mm):19.05; S1:18,26 mm; |
| CRBH7013A Crossed Roller Bearing 70X100X13mm | M:64,37 mm; G:108 mm; J:10 mm; E:63,2 mm; K:74 mm; Brand:ILJIN; I:55,5 mm; H:16,5 mm; Bore Diameter (mm):31,769; d:31,769 mm; |
| L6-16E9ZD Slewing Rings(19.9*11.97*2.2inch) With External Gears For Mining And Forestry Equipment | Bore Diameter (mm):35; Brand:ISO; D:47 mm; Bearing number:3807-2RS; Width (mm):10; d:35 mm; B1:10 mm; a:20 mm; C:10 mm; Outer Diameter (mm):47; |
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
130.40.1250 Three Row Roller Slewing Ring Bearing Video