| No. | Brand | b | B | e | f | m | s | Q | X |
| 10043-01-3 | - | - | - | - | - | - | - | - | - |
| B522ADB42C | Parker | - | 55 mm | - | - | - | - | - | - |
| 22205CA/W33 | NSK | - | - | - | - | - | - | - | - |
| R9RMKT | - | - | 3,96 mm | - | - | - | - | - | - |
| 010.25.1356 | - | - | - | - | - | - | - | - | - |
| NJ322 | NSK | - | 20 mm | - | - | - | - | - | - |
| 200/250/315/400/500 | Danfoss | - | - | - | - | - | - | - | - |
| S6211.W203B | fag | - | 12,19 mm | - | - | - | - | - | - |
| 21 | - | - | 16 mm | - | - | - | - | - | - |
| 7029521065 | Parker | - | - | - | - | - | - | - | - |
| 708-1L-00800 | - | - | - | - | - | - | - | - | - |
| 5.0-7.0t/H | - | - | - | - | - | - | - | - | - |
| 112-03-8 | - | - | - | - | - | - | - | - | - |
| M-SEW6 | Rexroth | - | - | - | - | - | - | - | - |
| Hm2200 | - | - | 52 mm | - | - | - | - | - | - |
| 6mm | - | - | - | - | - | - | - | - | - |
| HM231149#3 | Timken | - | 23 mm | - | - | - | - | - | - |
| 3000w | - | - | - | - | - | - | - | - | - |
| 9mm/12mm | - | - | - | - | - | - | - | - | - |
| S3508.2RSR.C3 | fag | - | 14 mm | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 400 | - | - | 243 mm | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| SY460 | INA | - | 20 mm | - | - | - | - | - | - |
| 250XRN35 Precision Cross Taper Roller Bearing | B:31 mm; Bore Diameter (mm):75; D:130 mm; Outer Diameter (mm):130; d:75 mm; Width (mm):31; Brand:ISO; Size (mm):75x130x31; Bearing number:NCF2215 V; C:31 mm; |
| XU060094 Bearing 57*140*26mm | Bore:1.26 Inch | 32 Milli; Internal Clearance:C0-Medium; Weight / LBS:0.27999; Size (mm):32x58x13; Bore Diameter (mm):32; Maximum Capacity / Filling Slot:No; Basic static load rating (C0):9,15 kN; Enclosure:2 Metal Shields; r min.:1 mm; Outer Race Width:0.512 Inch | 13 Mill; |
| HT10-60E1Z External Gear Slewing Ring Bearings (65.84*54*3.5inch) For Jib Cranes | Characteristic outer ring frequency, BPF0:8.71 Hz; Size (mm):80x140x33; Static load, C0:19.9 kN; Y0:2.61; Dynamic load, C:48.5 kN; Nlim:5,900 rpm; rs min:2 mm; B:33,000 mm; Width (mm):33,000; Y1:2.49; |
| XSU140644 Cross Roller Slewing Ring Bearing For Industrial Robotics | Width (mm):60,6; h:3 mm; Bore Diameter (mm):40; D:62 mm; W:2,15 mm; Brand:Samick; Weight:0,705 Kg; Size (mm):40x62x60.6; d:40 mm; L:80 mm; |
| 16271001 External Gear Slewing Ring Bearings (124.8*98.375*11.25inch) For Wind Turbines | Max. Shaft Shoulder Dia. Inner (Ui):9.1; Min. Housing Shoulder Dia., Outer (Uo):11.330; Bearing Type:Sealed; Weight (g):0.99; Brand:AST; Radius (min) (rs):0.100; Material:Martensitic Stainles; Outer Diameter (mm):12; Max Speed (Oil) (X1000 RPM):48; Precision:A1; |
| EX60-1 Excavator HITACHI Double Row Slewing Bearing 781*554*78mm | Da max.:192 mm; da min.:155 mm; r min.:2 mm; (Grease) Lubrication Speed:2 100 r/min; Outer Diameter (mm):182; J:177 mm; T1:84 mm; ra1 max.:1 mm; Weight:8,58 Kg; C:42 mm; |
| Four Point Contact Slewing Bearing Without Gear RKS.901175101001 | Bore Diameter (mm):120; Cy (max):5.1 mm; Groove Width:1.9 mm; Brand:NACHI; a (max):3.7 mm; C:22 mm; Weight:1.15 Kg; r min.:1.1 mm; D1:161.8 mm; Configuration:Single Row; |
| VSA201094 Bearing 1022*1198.1*56mm | Width (mm):9,525; D:12,7 mm; Basic static load rating (C0):2,6 kN; Basic dynamic load rating (C):2,9 kN; Bore Diameter (mm):7,938; Outer Diameter (mm):12,7; C:9,525 mm; Fw:7,938 mm; Brand:INA; Bearing number:SCE56P; |
| XV80 Crossed Roller Bearing 80X135X19mm | d:130 mm; Basic dynamic load rating (C):615 kN; Basic static load rating (C0):735 kN; Outer Diameter (mm):280; r min.:4 mm; Width (mm):58; Bore Diameter (mm):130; B:58 mm; Weight:18.5 Kg; Bearing number:NUP 326 E; |
| Crossed Roller Slewing Bearing With External Gear RKS.427020101001 | Weight:7.530 kg; Outside Ring Inside Diameter:185.5 mm; Db (min):201 mm; ra (max):2.5 mm; Dynamic Load Rating:300,000 N; Limiting Speed - Grease:2,800 rpm; db (min):114 mm; dc (min):132 mm; B:47 mm; Db (max):190 mm; |
| H7-43N3A Inner Gear Slewing Ring Bearing(45.8*37.8*3.84inch) For Water Treatment Equipment | C90 - Dynamic Radial Rating (90 million revolutions)4:105000 N; Aa - Cage-Cone Backface Clearance:3 mm; Y - ISO Factor9:1.25; Db - Cup Backface Backing Diameter:230.89 mm; r - Cup Backface To Clear Radius2:2.03 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:85900 N; Cup Part Number:Y32936M; C - Cup Width:34 mm; D:250 mm; Da - Cup Frontface Backing Diameter:244.1 mm; |
| Slewing Bearing VSI251055N 910*1155*80mm | Bore Diameter (mm):200; D:310 mm; Outer Diameter (mm):310; Brand:CRAFT; C:82 mm; Bearing number:23040MW33; d:200 mm; B:82 mm; Size (mm):200x310x82; Width (mm):82; |
| I.400.22.00.A-T Slewig Ring Bearing | B:125 mm; D:210 mm; Brand:ISO; Size (mm):140x210x125; d:140 mm; C:125 mm; Width (mm):125; Bore Diameter (mm):140; Outer Diameter (mm):210; Bearing number:NNU6028; |
| STM2000/32 Slewing Bearing For 100T Crawler Crane | Aa:6,9 mm; Size (mm):165.1x254x46.038; Weight:7,59 Kg; Basic static load rating (C0):644 kN; Db:234 mm; D:254 mm; d:165,1 mm; Factor (K):1,58; a -:1,5 mm; Outer Diameter (mm):254; |
| A22-166N1 Internal Gear Slewing Ring Bearing(176.38*153.6*9.5inch) For Sewage And Water Treatment Equipment | Brand:ISO; D:1090 mm; B:388 mm; Outer Diameter (mm):1090; Bore Diameter (mm):600; Size (mm):600x1090x388; d:600 mm; Width (mm):388; C:388 mm; Bearing number:232/600 KW33; |
| RK6-22E1Z External Gear Slewing Ring Bearings (25.15*17.09*2.205inch) For Stretch Wrapping Machines | Shaft Size:5.25 in; Dimension M:7.0 in; Bolt Size:4 x M30; Dimension L:24.5 in; Dimension H1:2.1 in; Seal Type:Viton Single Lip; Ca - Axial Load Rating:13219 lbf; Bearing Number:HSE504BR; Support Type:Four-Bolt Plummer Bl; Bearing - Housing - Seal:HSE504BRHRSS; |
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
130.25.560 Three Row Roller Slewing Ring Bearing Video