| No. | Brand | b | B | e | f | m | s | Q | X |
| UC217 | NTN | - | - | - | - | - | - | - | - |
| 95" | - | - | - | - | - | - | - | - | - |
| 21%N | - | - | - | - | - | - | - | - | - |
| 20x27x4 | INA | - | - | - | - | - | - | - | - |
| EZ30 | SKF | - | 82,55 mm | - | - | - | - | - | - |
| (1) | - | - | - | - | - | - | - | - | - |
| 23pcs | - | - | 27 mm | - | - | - | - | - | - |
| 1 | - | - | 36 mm | - | - | - | - | - | - |
| 750 | fag | - | 288,925 mm | - | - | - | - | - | - |
| 85mm, | - | - | - | - | - | - | - | - | - |
| 1631 | - | - | - | - | - | - | - | - | - |
| 320B | - | - | 48 mm | - | - | - | - | - | - |
| 3MMV9108WICRSUL | FAFNIR | - | - | - | - | - | - | - | - |
| (DG4-050) | - | - | - | - | - | - | - | - | - |
| (3A1001) | - | - | - | - | - | - | - | - | - |
| 1100 | NTN | - | 82 mm | - | - | - | - | - | - |
| 534176 | - | - | 46 mm | - | - | - | - | - | - |
| PC200-8 | - | - | 55 mm | - | - | - | - | - | - |
| 2800W | - | - | 150 mm | - | - | - | - | - | - |
| Q235 | - | - | - | - | - | - | - | - | - |
| (2) | - | - | 41 mm | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| HK1212 | - | - | - | - | - | - | - | - | - |
| 2W-250-25 | - | - | 51,6 mm | - | - | - | - | - | - |
| 17 | - | - | - | - | - | - | - | - | - |
| 50 | - | - | 21,5 mm | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 9E-1B16-0258-0996 Slewing Bearing With External Gear Teeth 179x342x42mm | Width (mm):24; C:24 mm; Angle (α):15 °; D:140 mm; Size (mm):90x140x24; B:24 mm; Bearing number:ML7018CVUJ74S; Brand:SNR; d:90 mm; Outer Diameter (mm):140; |
| 2780DBD101t Four-point Contact Ball Slewing Bearing With Innter Gear | Bearing number:SAA50TXE-2LS; Brand:SKF; Basic dynamic load rating (C):440 kN; Angle:6 °; Thread (G):M45x3 Tolerance 6g; r1 min.:0,6 mm; Bore Diameter (mm):50; C1 max:31 mm; dk:66 mm; l2 max.:244 mm; |
| CRBS1208 Crossed Roller Bearing | B1:-; Db(min):-; Ew:-; db(min):61.5; r min.:1.5 mm; r1 min.:1.1 mm; Fw:66 mm; dc(min):-; Size (mm):55x100x21; rb(max):1; |
| MMXC1916 Crossed Roller Bearing | Series:M349500; Db - Cup Backface Backing Diameter:322.07 mm; Bearing Weight:13.80 Kg; R - Cone Backface To Clear Radius1:6.35 mm; C - Cup Width:44.450 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:153000 lbf; db - Cone Backface Backing Diameter:280.92 mm; Cg - Geometry Factor:0.147; Da - Cup Frontface Backing Diameter:333.00 mm; e - ISO Factor8:0.35; |
| RB16025 XRB16025 Cross Roller Bearing Size 160x220x25 Mm RB 16025 XRB 16025 | Bore Diameter (mm):196,85; D:317,5 mm; r:3,3 mm; T:63,5 mm; d:196,85 mm; Size (mm):196.85x317.5x63.5; B:63,5 mm; Brand:Timken; C:46,038 mm; Width (mm):63,5; |
| A12-18E5 External Gear Slewing Rings(23.65*12.62*4.13inch) For Tunnel Boring Machines | Outer Diameter (mm):99,979; Size (mm):60.325x99.979x24.605; B:25,4 mm; D:99,979 mm; Brand:ISO; Bearing number:28985/28919; a:2,5 mm; Width (mm):24,605; C:19,05 mm; d:60,325 mm; |
| 478981 Slewing Bearing 405x627.72x62mm | C:60 mm; B:60 mm; Width (mm):60; Calculation factor (Y0):3,86; Brand:NACHI; Bore Diameter (mm):240; (Grease) Lubrication Speed:1200 r/min; r min.:2,1 mm; Calculation factor (e):0,17; Calculation factor (Y1):3,95; |
| 12770001 No Gear Slewing Ring Bearings (29.65*21.25*2.375inch) For Aerial Lifts | B:28,971 mm; (Oil) Lubrication Speed:3000 r/min; C_:24.608; Y1:1.2; d:88,9 mm; DE_:132.255; ALP23:0; GRS rpm:2200; inner r:3; D_b:143; |
| CRBS508 Crossed Roller Bearing 50X66X8mm | d1:723 mm; D:850 mm; Bearing number:292/630 M; Bore Diameter (mm):630; Basic static load rating (C0):23600 kN; Outer Diameter (mm):850; Brand:CX; Weight:210 Kg; Basic dynamic load rating (C):4770 kN; T:132 mm; |
| 4789/1520 Slewing Bearing 1520x1782.33x80mm | Aa - Cage-Cone Backface Clearance:0 mm; R - Cone Backface To Clear Radius1:1.270 mm; Bearing Weight:0.10 Kg; Design Units:Imperial; Y - ISO Factor9:2.1; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:838 lbf; Da - Cup Frontface Backing Diameter:37.59 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:6600 lbf; C90 - Dynamic Radial Rating (90 million revolutions)4:1710 lbf; Cg - Geometry Factor:0.0392; |
| R11-79N3 Outer Gear Cross Roller Slewing Ring Bearings(85.47*69.943*3.858inch) For Radar Antennas | Width (mm):97,2; m:6,74 kg / Weight; r1 min:1 mm; C0a:455000 N / Static lo; da max:90 mm; Brand:FAG; d:75 mm; Bore Diameter (mm):75; Bearing number:54318; Size (mm):75x155x97.2; |
| 9E-1Z16-0310-0517 Crossed Roller Slewing Rings 235/403.5/55mm | L1:106 mm; Basic dynamic load rating (C):43,4 kN; H:146 mm; H1:130 mm; H2:102 mm; L3:95 mm; Brand:FYH; d:55,5625 mm; A1:22 mm; A2:38 mm; |
| XA200352 Bearing 274*462*59mm | Outside Diameter:2.047 Inch | 52 Mill; Cr:39.3; Calculation factor (e):0,37; Bore:0.984 Inch | 25 Mill; Da max.:46,5 mm; C0r:33.7; da(min):30.5; Grease lub.:7800; da max:31 mm; Assembly Width:0.64 Inch | 16.25 Mi; |
| XR766051 Crossed Roller Bearing | Weight:32,9 Kg; (Grease) Lubrication Speed:1700 r/min; Ew:281 mm; Width (mm):86; Size (mm):170x310x86; Outer Diameter (mm):310; Basic static load rating (C0):1410 kN; Brand:CX; D:310 mm; C:86 mm; |
| L6-25N9ZD Slewing Rings(29.45*21.6*2.2inch) With Internal Gears For Excavators And Ladle Turrets | Outer Diameter (mm):185,725; D:185,725 mm; r max:1,6 mm; Bore Diameter (mm):50,8; d:50,8 mm; D1:176,21 mm; Bearing number:20TPS104; C:46,038 mm; Brand:Timken; H:163,5 mm; |
| L6-22P9ZD No Gear Slewing Rings(25.51*17.09*2.2inch) For Reclaimers | Cover Length C1:0.995 in; Cover Diameter A:3.345 in; Type:Open; Number of Bolts:4; |
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Bearing XSA141094N 924*1198.1*56mm Video