| No. | Brand | b | B | e | f | m | s | Q | X |
| 1205 | RBC | - | - | - | - | - | - | - | - |
| [Jz-RS116] | - | - | - | - | - | - | - | - | - |
| 6.38mm | INA | - | - | - | - | - | - | - | - |
| (4x) | - | - | - | - | - | - | - | - | - |
| PC200-8 | - | - | 18 mm | - | - | - | - | - | - |
| 12 | - | - | 13 mm | - | - | - | - | - | - |
| 6008-2RS1/C3HT51 | SKF | - | - | - | - | - | - | - | - |
| C3 | - | - | 18 mm | - | - | - | - | - | - |
| 1019 | SKF | - | 31 mm | - | - | - | - | - | - |
| PV20 | INA | - | - | - | - | - | - | - | - |
| 1978-1981 | Timken | - | - | - | - | - | - | - | - |
| 12FT | - | - | - | - | - | - | - | - | - |
| 45BWD07 | NSK | - | - | - | - | - | - | - | - |
| 2.7Mm | - | - | - | - | - | - | - | - | - |
| NU209C3 | Nachi | - | 3.1103 in | - | - | - | - | - | - |
| 27mm | - | - | - | - | - | - | - | - | - |
| 115A-071-AS-0, | Parker | - | - | - | - | - | - | - | - |
| 12mm-18mm | - | - | - | - | - | - | - | - | - |
| Dw5-2-10 | - | - | 56,363 mm | 0.3 | - | - | - | - | - |
| ST4 | NTN | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 9400 | John Deere | - | - | - | - | - | - | - | - |
| 16271001 External Gear Slewing Ring Bearings (124.8*98.375*11.25inch) For Wind Turbines | Max. Shaft Shoulder Dia. Inner (Ui):9.1; Min. Housing Shoulder Dia., Outer (Uo):11.330; Bearing Type:Sealed; Weight (g):0.99; Brand:AST; Radius (min) (rs):0.100; Material:Martensitic Stainles; Outer Diameter (mm):12; Max Speed (Oil) (X1000 RPM):48; Precision:A1; |
| DH500-7 Excavator DAEWOO Double Row Sleiwng Bearing 1682*1319*138mm | Cone Part Number:X33112; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:28600 N; Ab - Cage-Cone Frontface Clearance:3.3 mm; Cg - Geometry Factor:0.102; da - Cone Frontface Backing Diameter:67.06 mm; Y - ISO Factor9:1.51; B - Cone Width:30.000 mm; K - Factor7:1.47; Aa - Cage-Cone Backface Clearance:1.8 mm; Db - Cup Backface Backing Diameter:89.92 mm; |
| 3R6-79N9 Internal Gear Heavy Duty Slewing Ring(84.05*70.514*4.72inch) For Climbing Cranes And Tower Cranes | B:16,000 mm; D:58,000 mm; Brand:NTN; Size (mm):28x58x16; Width (mm):16,000; Bore Diameter (mm):28,000; d:28,000 mm; C:16,000 mm; Bearing number:62/28ZZNR; Outer Diameter (mm):58,000; |
| 2N-AT24005-1HBPX1 Slewing Bearing With Outer Gear 1200x1600x170mm | Size (mm):8x22x9.8; Basic dynamic load rating (C):3,65 kN; Width (mm):9,8; Bearing number:38KTD; Bore Diameter (mm):8; Brand:Timken; D:22 mm; B:9,8 mm; Weight:0,018 Kg; Outer Diameter (mm):22; |
| VLU200644 Slewing Bearing | Long Description:25MM Bore 1; 27MM Bo; KBRG:5121; Prod_Type3:TB_SD_WAS; d:25 mm; T:26,4 mm; SREX:0.05; C0:89.5; Inch - Metric:Metric; Width (mm):26,4; Overall Height with Aligning Washer:0 Inch | 0 Millimete; |
| 132.25.630 Slewing Bearing 496x764x148mm | d:30 mm; a:28,9 mm; B1:23,8 mm; Bore Diameter (mm):30; C:23,8 mm; D:62 mm; (Grease) Lubrication Speed:7000 r/min; Size (mm):30x62x23.8; Width (mm):23,8; Brand:CX; |
| JT-G19-1111G RCT Clutch Release Bearing | Category:Precision Ball Beari; ra - max.:0.6 mm; Preload class C:168 N/micron; Preload class D - GD:640 N; Calculation factor f2A:1; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor - Y0:0.76; Calculation factor e:0.68; Calculation factor f2B:1.04; Calculation factor - f2C:1.08; |
| R9-67N3 Outer Gear Cross Roller Slewing Ring Bearings(72.2*59.086*3.15inch) For Radar Antennas | Dynamic Load Rating:213,000 N; Hole Diameter (do):3 mm; d:65 mm; ra (max):1.5 mm; D:120 mm; Roller Profile:Asymmetric; Axial Load Factor Y0:2.21; Limiting Speed - Grease:5,700 rpm; Center Guidance:Fixed Inner Ring Rib; Axial Load Factor Y1:2.26; |
| 3R16-265N3 Internal Gear Heavy Duty Slewing Ring(279.59*248.504*10.55inch) For Climbing Cranes And Tower Cranes | B:7,92 mm; Size (mm):19.05x41.275x7.92; Basic static load rating (C0):4,4 kN; Weight:0,05 Kg; Bore Diameter (mm):19.05; Basic dynamic load rating (C):10,4 kN; Width (mm):7,92; C:7,92 mm; d:19.05 mm; Outer Diameter (mm):41,275; |
| RKS.160.14.0944 Crossed Roller Slewing Bearings(1014*874*56mm) Without Gear For Industrial Manipulator | D1:28 mm; Outer Diameter (mm):35; db min:20 mm; r1 min:0,3 mm; Width (mm):11; Size (mm):15x35x11; Da max:32,6 mm; Cr:15100 N / Dynamic lo; ra max:0,6 mm; Cur:1410 N / Fatigue lim; |
| 2789/2285 Slewing Bearing 2285x2720x184mm | Inventory:0.0; d:25 mm; A:20 mm; Thread (Q):Rp1/8; Weight / Kilogram:0.623; A1:11 mm; J:99 mm; Minimum Buy Quantity:N/A; N1:37,5 mm; W:63 mm; |
| 130.45.2000 Slewing Bearing 1779x2221x231mm | Bolt Qty:2; J:450.00 mm; C0 Static Load Rating:1660; G:M30; Bearing:23230; Jmax:457 mm; Shaft Diameter db:165 mm; C1 Dynamic Load Rating:1270; Material :Cast Iron; Max Grease Speed:1400; |
| RKS.425060201001 Crossed Roller Slewing Bearings(1475*1080*110mm) With External Gear Teeth For Textile Machine | Bore Diameter (mm):55; D:80 mm; Outer Diameter (mm):80; d:55 mm; Brand:SNR; Angle (α):15 °; Width (mm):26; Size (mm):55x80x26; C:26 mm; Bearing number:MLE71911CVDUJ74S; |
| A6-14E10 External Gear Slewing Rings(17.067*10.43*2.24inch) For Tunnel Boring Machines | Cone Part Number:EE135111DW; G1 - Heat Generation Factor (Roller-Raceway)8:1590; db - Cone Backface Backing Diameter:11.69 in; C0 - Static Radial Rating:375000 lbf; Ab - Cage-Cone Frontface Clearance:0.03 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:88600 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:342000 lbf; Series:135000; C1 - Dynamic Radial Rating (1 million revolutions)1:196000 lbf; |
| 100 mm x 180 mm x 34 mm RKS.162.14.1094 Crossed Roller Slewing Bearings(1164*984*56mm) With Internal Gear For Industrial Robot | ra1 max.:1 mm; Outer Diameter (mm):255; ra max.:2 mm; r1 min.:1,1 mm; Bore Diameter (mm):180; da min.:219 mm; Weight:24,7 Kg; Da max.:270 mm; Basic static load rating (C0):865 kN; d:180 mm; Size (mm):100 mm x 180 mm x 34 mm ; |
| 23 1091 01 Light Series No Gear Slewing Ring(1198*984*56mm)for Bending Robot | Bearing number:7010CDB; Angle (α):15 °; Brand:CYSD; Basic dynamic load rating (C):42 kN; C:16 mm; Weight:0,506 Kg; B:16 mm; Basic static load rating (C0):44 kN; D:80 mm; Outer Diameter (mm):80; |
Slewing Bearing VSU201094 1022*1166*56mm Video
Tapered roller bearing TRA0607-N-KOYO - 30x72x20.75 mm
Tapered roller bearing TRA0607-N-KOYO IN STOCK, dim : Ø int. 30 x Ø ext. 72 x th. 20.75 mm. SAME DAY SHIPPING. The specialist at your service for over 10
30306 taper roller bearings 30x72x20.75 30306X
30306 precision taper roller wheel bearings 30x72x20.75 in stock X30306-Y30306 ship same day 30306-A Wheel Bearings Assembly HR30306 buy online
Tapered Roller Bearing 30306 30x72x20.75 mm - Kugellager
Tapered Roller Bearing 30306 30x72x20.75 > Inexpensive Roller Bearing > temperature range up to +120°C > in case of high radial loads • Now available!
Tapered roller bearing 30306-J-NSK - 30x72x20.75 mm
Tapered roller bearing 30306-J-NSK IN STOCK, dim : Ø int. 30 x Ø ext. 72 x th. 20.75 mm. SAME DAY SHIPPING. The specialist at your service for over 10 years
30306 tapered roller bearing 30x72x20.75 - Bearings Direct
30306 metric size tapered roller bearing in set of cone+cup sizes 30x72x20.75 is in stock at your on line bearing store, bearings direct.com
30306 Taper Roller Wheel Bearings 30x72x20.75
30306 Taper Roller Wheel Bearings 30x72x20.75. ... 30306 Taper Roller Wheel Bearings 30x72x20.75. Larger Photo. 30306 Taper Roller Wheel Bearings
30306 Taper Roller Wheel Bearings 30x72x20.75 VXB Brand
30306 Taper Roller Wheel Bearings 30x72x20.75 VXB Brand: Bearings And Bushings: Amazon.com: Industrial & Scientific