| No. | Brand | b | B | e | f | m | s | Q | X |
| K95 | - | - | - | - | - | - | - | - | - |
| 50pc | - | - | 18 mm | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 6015BNLS | Nachi | - | 28,575 mm | - | - | - | - | - | - |
| 99.5%Min | - | - | - | - | - | - | - | - | - |
| 2017 | INA | - | - | - | - | - | - | - | - |
| omh500 | INA | - | - | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| 6816 | koyo | - | - | - | - | - | - | - | - |
| 12/15/18/21mm | - | - | - | - | - | - | - | - | - |
| 33275 | koyo | - | - | - | - | - | - | - | - |
| 60/32-2RS | - | - | - | - | - | - | - | - | - |
| E330C | - | - | - | - | - | - | - | - | - |
| 2003 | NSK | - | 100 mm | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 7008CB/HCP4AL | SKF | - | - | - | - | - | - | - | - |
| 71904 | INA | - | - | - | - | - | - | - | - |
| 5309-A-Z/C3 | SKF | - | - | - | - | - | - | - | - |
| 1220*2440mm | - | - | 25.250 mm | - | - | - | - | - | - |
| 5 | - | - | 49 mm | - | - | - | - | - | - |
| 42687 | Bower | - | - | - | - | - | - | - | - |
| MSK0171E-0300-FN-M1-UGO-NNN | Rexroth | - | 17 mm | - | - | - | - | - | - |
| RA9008UUCC0 CRBS908 Crossed Roller Bearing For Robotic Arm | Basic dynamic load rating (C):0,709 kN; d:4,763 mm; Width (mm):3,175; Bore Diameter (mm):4,763; (Grease) Lubrication Speed:50000 r/min; C:3,175 mm; Bearing number:SR166-2TS; Outer Diameter (mm):9,525; B:3,175 mm; Size (mm):4.763x9.525x3.175; |
| HT10-42N1Z Internal Gear Slewing Ring Bearings (48*36.16*3.5inch) For Industrial Turntable | Basic dynamic load rating (C):109 kN; Basic static load rating (C0):215 kN; D:105 mm; r min.:1 mm; Size (mm):85x105x35; Fw:85 mm; Weight:0,59 Kg; Brand:NSK; Bearing number:RLM8510535-1; C:35 mm; |
| RKS.162.16.1644 Crossed Roller Slewing Bearings(1752*1495*68mm) With Internal Gear For Industrial Robot | Size (mm):35x62x20; Basic dynamic load rating (C):37,2 kN; Dynamic load rating radial (C):47,5 kN; Outer Diameter (mm):62; C:20 mm; (Grease) Lubrication Speed:10000 r/min; Brand:CYSD; Ew:55 mm; D:62 mm; B:20 mm; |
| SSF1676/60CHH Slewing Bearing For 70T Excavator Machine | Recommended tightening torque for grub screw:16.5 N·m; Housing material:Cast iron; Hexagonal key size for grub screw N:5 mm; Bearing:YARAG 210; Recommended diameter for attachment bolts, mm G:16 mm; A5:29.5 mm; Rα:45 °; Recommended diameter for attachment bolts, inch G:0.625 in; Limiting speed:800 r/min; Bore Diameter (mm):50; |
| Supply VSA200844N Four Point Contact Ball Slewing Bearing 772x950.1x56mm | Brand:CRAFT; Weight (kg):1.361; Compatibility:FORD; Size (mm):57.150x112.712x30.16; Bore Diameter (mm):57,150; Width (mm):30,162; Bearing number:CRF-39581/39520 A; Designation SKF:VKHB 2088; Outer Diameter (mm):112,712; |
| A18-46E4D External Gear Slewing Rings(55*39.03*4.75inch) For Tunnel Boring Machines | Bearing Length, Nominal (B):0.375; Material:Carbon steel shell w; Average Clearance (Cd):0.0021; Bearing Bore after Mounting (di) - 0.627:0.6242; Flange Thickness (Sfl):0.048; Flange Dia. (Dfl pm 0.5):0.940; Housing Bore Dia. (Dh) - 0.7192:0.7184; Brand:AST; ID Chamfer Angle (B deg.):30; Bearing Length Tolerance (B tol.) - +.010 / -0.010:+.010 / 0.010; |
| 01-2130-00 External Gear Slewing Ring Bearing(2390*1950*130mm)for Construction Machinery | Outer Diameter (mm):47; Width (mm):30; d:25 mm; B:30 mm; Brand:ISO; Bore Diameter (mm):25; D:47 mm; Size (mm):25x47x30; C:30 mm; Bearing number:NNCF5005 V; |
| Cross Roller Bearing RB8016UUCC0P5 | B:34 mm; Width (mm):122; ra - max.:4 mm; d:1120 mm; Reference speed:130 r/min; D1:1125 mm; da min.:1274 mm; r1,2 - min.:5 mm; d1:1315 mm; Basic static load rating - C0:36500 kN; |
| Offer XA 402130N Slewing Bearing 1965*2381.4*118mm | Da max.:159 mm; r min.:2,1 mm; Width (mm):39; C:39 mm; d:80 mm; Bore Diameter (mm):80; B:39 mm; Basic static load rating (C0):130 kN; Weight:4,08 Kg; Outer Diameter (mm):170; |
| 4000050-009 Manitex Boom Truck Slewing Ring | B:12 mm; d:50 mm; D:72 mm; Bore Diameter (mm):50; Outer Diameter (mm):72; Bearing number:6910NR; Size (mm):50x72x12; C:12 mm; Width (mm):12; Basic dynamic load rating (C):12,8 kN; |
| XU280680 Bearing 565*795*79mm | Fw:28,575 mm; Bore Diameter (mm):28,575; Width (mm):12,7; Basic dynamic load rating (C):16,8 kN; Bearing number:B-188; C:12,7 mm; D:34,925 mm; Size (mm):28.575x34.925x12.7; Weight:0,023 Kg; Brand:NSK; |
| RKS.060.25.1534 Four Point Contact Slewing Bearings(1619*1449*68mm) Without Gear For Stacker Crane | r1 min.:1 mm; Size (mm):25x62x22.5; Brand:LS; Outer Diameter (mm):62; Bore Diameter (mm):25; C:16,7 mm; B:16,5 mm; T:22,5 mm; D1:34,5 mm; dk:68 mm; |
| CRBS1108 Crossed Roller Bearing | Bearing:23232K; Seal Type:Taconite; L:550.00 mm; Housing Mass:54.5 Kg; A3:315 mm; Cage Type:EJ; Adapter Sleeve1:H2332; H:344 mm; H2:60.00 mm; Locating Rings (width x OD):SR290X5; |
| CAT320C Excavator CATERPILLAR Double Row Slewing Bearing 1316*1081*105mm | Dimension B:11.09 in; Engineering Group:Mounted Bearing; Dimension F:17.50 in; Weight:136 lb; Dimension SVV:7.02 in; Dimension RVV:0.99 in; Shaft Tolerance:0.0050 in; Pre Install Clearance Max:0.0067 in; Oil Lubrication - T Seal:1500 rpm; Eng Internal Radial Clearance - Min:0.0053; |
| SSF0710/32 Slewing Bearing For 8T Truck Crane | Weight (g):4,115.00; Bearing Type:NJ; Min. Housing Shoulder Dia., Outer (Lo):135.3; Max. Shaft Shoulder Dia. Inner (Li):89.3; Precision:RBEC 1; Material:52100 Chrome steel,; Max Speed (Grease) (X1000 RPM):4; Size (mm):65x160x37; Brand:AST; Width (mm):37; |
| CRBF8022 A Cross Roller Bearing | Size (mm):200x320x165; B:165 mm; R:275 mm; Angle:15 °; Bore Diameter (mm):200; D:320 mm; C:100 mm; Width (mm):165; Bearing number:GE 200 HCR-2RS; Outer Diameter (mm):320; |
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
9E-1B22-0343-1167 Slewing Bearing With External Gear 263.5x434x50mm Video