| No. | Brand | b | B | e | f | m | s | Q | X |
| ALL68532 | - | - | - | - | - | - | - | - | - |
| D2 | INA | - | - | - | - | - | - | - | - |
| 15mm | INA | - | 46 mm | - | - | - | - | - | - |
| F17 | - | - | - | - | - | - | - | - | - |
| 880 | - | - | - | - | - | - | - | - | - |
| MCR05 | - | - | - | - | - | - | - | - | - |
| MT50 | - | - | - | - | - | - | - | - | - |
| 06-13 | - | - | - | - | - | - | - | - | - |
| NU207 | NSK | - | 51,6 mm | - | - | - | - | - | - |
| (A3) | - | - | - | - | - | - | - | - | - |
| ES100 | - | - | - | - | - | - | - | - | - |
| ZL12F | - | - | - | - | - | - | - | - | - |
| BK1612 | - | - | 40 mm | - | - | - | - | - | - |
| P2 | - | - | 51 mm | - | - | - | - | - | - |
| 3 | - | - | 200 mm | - | - | - | - | - | - |
| 35N | - | - | 14 mm | - | - | - | - | - | - |
| Gx120 | INA | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | - | 2 lbs / Weight | - | - | - |
| M36 | - | - | - | - | - | - | - | - | - |
| 638ZZ | - | - | 68 mm | - | - | - | - | - | - |
| 9mm/12mm/15mm/18mm | - | - | 29 mm | - | - | - | - | - | - |
| 22205CA/W33 | NSK | - | - | - | - | - | - | - | - |
| 2x | TRW | - | 53 mm | - | - | - | - | - | - |
| 619301360 | - | - | 218 mm | - | - | - | - | - | - |
| GE40DO | - | - | 300 mm | - | - | - | - | - | - |
| 6203 | - | - | - | - | - | - | - | - | - |
| 600DBS204y Four-point Contact Ball Slewing Bearing With External Gear | Bearing Outside Diameter, Nominal(Do):45.000; Flange Dia. (Dfl pm 0.5):60.000; Material:Cast bronze with sol; ID Chamfer Angle (B deg.):15; Outer Diameter (mm):45; Bearing number:AST650 F354530; Bearing Length Tolerance (B tol.) - -0.10 / -0.30:0.10 / 0.30; OD Chamfer Length (Co):2.000; Bearing Length, Nominal (B):30.000; ID Chamfer Length (Ci):1.200; |
| VU360980 Bearing 870*1090*79mm | Bearing number:233TVL303; Brand:Timken; E:692,2 mm; H:692,2 mm; D:790,575 mm; T:117,475 mm; Outer Diameter (mm):790,575; Width (mm):117,475; D1:720,72 mm; Size (mm):593.725x790.575x117.; |
| SSM1116/40 Slewing Bearing For 37M Pump Truck | Mass:0.27 kg; Bc:25,700 mm; Bore Diameter (mm):155,000; Characteristic cage frequency, FTF:0.49 Hz; Nlim (grease):1,700 rpm; Characteristic inner ring frequency, BPFI:34.86 Hz; Outer Diameter (mm):163,000; Max operating temperature, Tmax:120 °C; Min operating temperature, Tmin:-20 °C; Cr:73.5 kN; |
| External Gear VA703005N Slewing Bearing 2820x3273x154mm | Brand:CX; Df:17 mm; Width (mm):5; C:5 mm; (Grease) Lubrication Speed:37000 r/min; Size (mm):6x15x5; Bore Diameter (mm):6; Basic dynamic load rating (C):1,35 kN; B:5 mm; Basic static load rating (C0):0,53 kN; |
| VLI201094 Bearing | B:65 mm; d:110 mm; Bearing number:NP422; Brand:ISO; D:280 mm; Bore Diameter (mm):110; Size (mm):110x280x65; C:65 mm; Width (mm):65; Outer Diameter (mm):280; |
| RKS.111280101002 Crossed Roller Slewing Bearings(562*384*60mm) With Internal Gear Teeth For Industrial Robot Arm | Basic static load rating (C0):421 kN; Width (mm):40; Fw:143,5 mm; Brand:CX; Basic dynamic load rating (C):336 kN; Size (mm):120x215x40; Weight:5,85 Kg; (Grease) Lubrication Speed:2800 r/min; d:120 mm; D:215 mm; |
| XD.10.0902 Crossed Roller Bearing | Angle (α):15 °; Bore Diameter (mm):60; Brand:NTN; C:13 mm; Bearing number:7912UCG/GNP4; Outer Diameter (mm):85; D:85 mm; B:13 mm; Size (mm):60x85x13; d:60 mm; |
| 16316001 External Gear Slewing Ring Bearings (196.85*173.622*7inch) For Log Loaders And Feller Bunchers | Bolt Size:4 x M12; Shaft Size:1.25 in; Seal Type:High Temperature Pac; Maximum Speed:5400 rpm; Dimension L:3.7 in; Dimension H:2.0 in; Dimension P:0.5 in; Bearing UPC:013992025326; Series Type:Light Series; Bearing - Housing - Seal UPC:013992087270; |
| 1797/3230G2Y3K Slewing Bearing 3230x4100x240mm | C:54 mm; Fw:90 mm; Brand:IKO; B:55 mm; Weight / Kilogram:0; Width (mm):55; Category:Bearings; d:80 mm; Basic static load rating (C0):317 kN; Size (mm):80x110x55; |
| 130.50.3150 Slewing Bearing 2826x3432x270mm | Da - min.:318 mm; r1,2 - min.:4 mm; Basic static load rating C0:2000 kN; Outer Diameter (mm):200; D1:311.6 mm; D:360 mm; ra max.:3 mm; Fatigue load limit - Pu:200 kN; Width (mm):98; d:200 mm; |
| HRA6008 HRA Crossed Roller Bearing 60X 76 X 8 Mm | T:47,625 mm; Bearing number:758/752; Brand:ISO; C:38,1 mm; D:161,925 mm; Size (mm):85.725x161.925x47.62; d:85,725 mm; a:11,9 mm; Outer Diameter (mm):161,925; Width (mm):47,625; |
| EX450-3 Excavator HITACHI Double Row Slewing Bearing 1652*1274*130mm | Limiting Speed - Grease:2,300 rpm; da (min):124 mm; Limiting Speed - Oil:3,000 rpm; Da (max):226 mm; Retainer Material:Pressed Steel; Configuration:Double Row; Dynamic Load Rating:675,000 N; d:110 mm; Static Load Rating:635,000 N; Groove Width A:8 mm; |
| R11-79E3 Outer Gear Cross Roller Slewing Bearings(87.771*72*3.858inch) For Lift Truck Rotators | C:13 mm; Basic static load rating (C0):17,6 kN; Weight:0,3 Kg; Width (mm):13; Size (mm):95x120x13; Basic dynamic load rating (C):19,9 kN; d:95 mm; Bearing number:6819-2RS; B:13 mm; Outer Diameter (mm):120; |
| Good Quality XA 280995N Slewing Bearing 882*1158*80mm | Brand:CX; a:86,5 mm; Basic static load rating (C0):131 kN; D:130 mm; Bearing number:7312 A-UO; Weight:3,94 Kg; Width (mm):62; B1:62 mm; Bore Diameter (mm):60; Size (mm):60x130x62; |
| RKS.062.25.1754 Four Point Contact Slewing Bearings(1862*1605*68mm) With Internal Gear For Construction And Industry Machines | Da - Cup Frontface Backing Diameter:41.90 mm; Cg - Geometry Factor:0.0441; C0 - Static Radial Rating:7200 lbf; Db - Cup Backface Backing Diameter:39.62 mm; K - Factor7:1.94; C1 - Dynamic Radial Rating (1 million revolutions)5:8800 lbf; Series:LM11900; a - Effective Center Location3:-5.6 mm; Y - ISO Factor9:2; C - Cup Width:12.065 mm; |
| Crossed Roller Slewing Bearing RKS.160.14.1094 | Basic dynamic load rating (C):4,3 kN; l7 min.:— mm; l1 min.:22 mm; Bore Diameter (mm):6; Bearing number:SABP6S; B:9 mm; Weight:0,026 Kg; d:6 mm; Brand:LS; Angle:13 °; |
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
9E-1Z30-0823-1250 Crossed Roller Slewing Bearing With External Gear 715/979/00mm Video