| No. | Brand | b | B | e | f | m | s | Q | X |
| 112-03-8 | - | - | - | - | - | - | - | - | - |
| 6915 | Nachi | - | - | - | - | - | - | - | - |
| 2019 | - | - | 20 mm | - | - | - | - | - | - |
| CRF450X, | - | - | 64 mm | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| 3 | INA | - | 36,512 mm | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 7 | - | - | - | - | - | - | - | - | - |
| 6mm | - | - | - | - | - | - | - | - | - |
| WB000049 | Timken | - | 15,24 mm | - | - | - | - | - | - |
| 22310CD | NSK | - | - | - | - | - | - | - | - |
| 2x | TRW | - | 53 mm | - | - | - | - | - | - |
| 11mm | - | - | - | - | - | - | - | - | - |
| 516007 | Timken | - | - | - | - | - | - | - | - |
| 600 | koyo | - | - | - | - | - | - | - | - |
| 2200 | NSK | - | - | - | - | - | - | - | - |
| 6310VVC3 | NSK | - | 10 mm | - | - | - | - | - | - |
| RNA4916 | koyo | - | - | - | - | - | - | - | - |
| 5182A | - | - | - | - | - | - | - | - | - |
| 1983-2006 | Timken | - | 60 mm | - | - | - | - | - | - |
| 2310 | NTN | - | - | - | - | - | - | - | - |
| PC300-3 | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 500D | INA | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| Qt10-15 | - | - | - | - | - | - | - | - | - |
| 6D341T | - | - | - | - | - | - | - | - | - |
| 460B | - | - | - | - | - | 1,08 kg / Weight | - | - | - |
| 90-200541/0-07022 Four-point Contact Ball Slewing Bearing 434x648x56mm | d1:160.00 mm; Ro:M6; Lockwasher and Lockplates:MBL36; t:9 mm; Appropriate Hydraulic Nut:HMV36; L1:87.00 mm; D3:210 mm; C:29.5 mm; Weight:5.70 Kg; G:M180x3; |
| 9129521 1274mmx1650mmx130mm Hitachi Zx450lc Excavator Slewing Rings | Permissible sliding velocity v min.:0 m/s; Manufacturer Name:SKF; Minimum Buy Quantity:N/A; M:3 mm; Coefficient of friction µ min.:0.02; Width (mm):15; Specific dynamic load factor K:120 N/mm²; Product Group:B04264; Basic static load rating - radial direction C0:56 kN; Weight:0,0043 Kg; |
| Competitive Price XIU25/630Y Cross Roller Bearing 488*732*75mm | D:140 mm; Width (mm):58; Bore Diameter (mm):32; Outer Diameter (mm):140; Bearing number:PHU2029; d:32 mm; Brand:PFI; B:58 mm; Size (mm):32x140x58; |
| 02 1565 02 Slewing Ring Bearing | Cone Part Number:EE776420; a - Effective Center Location4:6.92 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:271000 lbf; Cage Type:Pin-Type; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:1040000 lbf; Design Units:Imperial; da - Cone Frontface Backing Diameter:43.9 in; C1 - Dynamic Radial Rating (1 million revolutions)6:599000 lbf; K - Factor8:1.02; G2 - Heat Generation Factor (Rib-Roller End):2946.7; |
| 08 0400 00 Slewing Ring Bearing | D:107,95 mm; d:55,562 mm; Width (mm):29,317; R:2,3 mm; Brand:Timken; B:29,317 mm; C:22,225 mm; Bore Diameter (mm):55,562; Size (mm):55.562x107.95x29.317; Outer Diameter (mm):107,95; |
| 16393001 External Gear Slewing Ring Bearings (209.843*188.583*7.047inch) For Wind Turbines | Ew:40 mm; Outer Diameter (mm):40; Bearing number:K35x40x25; B:25 mm; Bore Diameter (mm):35; Brand:ISO; Fw:35 mm; Size (mm):35x40x25; Width (mm):25; |
| SH200C3 Excavator SUMITOMO Three Row Slewing Bearing 1330*1093*102mm | Outer Diameter (mm):780; D:780 mm; Width (mm):112; Brand:ISO; Bearing number:N38/630; B:112 mm; d:630 mm; Size (mm):630x780x112; C:112 mm; Bore Diameter (mm):630; |
| BFKB353243/HA4 Crossed Roller Bearing | C:50 mm; Bore Diameter (mm):220; Da max.:262 mm; Width (mm):50; B:50 mm; Basic dynamic load rating (C):238 kN; r2 min.:1,5 mm; ra max.:1,5 mm; Fatigue load limit (Pu):81,5; Outer Diameter (mm):270; |
| RKS.060.20.0414 Four Point Contact Slewing Bearings(486*342*56mm) Without Gear For Stacker Crane | R:80 mm; Cua:9000 N / Fatigue li; Ca:102000 N / Dynamic l; D3:110 mm; T2:72,6 mm; ra max:1 mm; ra1 max:0,6 mm; Da max:80 mm; C0a:208000 N / Static lo; Size (mm):45x110x78; |
| RKS.060.20.1094 Four Point Contact Slewing Bearings(1166*1022*56mm) Without Gear For Stacker Crane | Basic dynamic load rating (C):8,83 kN; Bearing number:BHA 810 Z; Bore Diameter (mm):12,7; Weight:0,0125 Kg; C:15,88 mm; Size (mm):12.7x19.05x15.88; D:19,05 mm; Brand:IKO; Basic static load rating (C0):10,9 kN; Fw:12,7 mm; |
| XU080430 Bearing 380*480*26mm | r min.:0,3 mm; B:7 mm; Basic dynamic load rating (C):4,65 kN; Brand:CYSD; Width (mm):7; d:45 mm; C:7 mm; Size (mm):45x58x7; Weight:0,04 Kg; Outer Diameter (mm):58; |
| R8-49E3 Outer Gear Cross Roller Slewing Bearings(65.04*44.8*2.874inch) For Lift Truck Rotators | Y - ISO Factor3:1.8; Da - Cup Frontface Backing Diameter:5.96 in; D:6.1801 in; e - ISO Factor2:0.33; Design Units:Imperial; C - Cup Width:1.3386 in; Cg - Geometry Factor:0.0923; Cup Part Number:KHM220110; r - Cup Backface To Clear Radius1:0.140 in; Db - Cup Backface Backing Diameter:5.59 in; |
| 131.40.1400 Slewing Bearing 1205x1595x220mm | Adapter Sleeve1:H306; Housing:SNT 506-605; C1 Dynamic Load Rating:67.4; Jmax:157 mm; Seal:TA506; Housing Mass:2.0 Kg; H:89.00 mm; Locknut:KM6; N:15 mm; Bearing:22206K; |
| 1787/700 Slewing Bearing 700x880x65mm | Adapter Sleeve1:HA306; Jmax:157 mm; N1:20.00 mm; Housing:SNT 507-606; Cage Type:EJ; H1:50 mm; A:82.00 mm; H:93 mm; G:M12; Lockwasher:MB6; |
| JXR699050 Cross Tapered Roller Bearing | Category:Single Row Ball Bear; outside diameter:120 mm; series:63; Weight / Kilogram:0; Snap Ring:No; Precision Class:ABEC 1 | ISO P0; C:29 mm; maximum rpm (grease):5800 rpm; B:29 mm; overall width:29 mm; |
| 55 mm x 120 mm x 29 mm Good Service VI 401500N Slewing Bearing 1380*1630*92mm | Basic dynamic load rating (C90):32,7; Basic dynamic load rating (C1):126 kN; Weight:1,3 Kg; da:81 mm; Basic dynamic load rating (Ca90):23,5; Bore Diameter (mm):70; Factor (K):1,39; Basic static load rating (C0):177 kN; C:21 mm; Bearing number:X30214M/Y30214M; Size (mm):55 mm x 120 mm x 29 mm ; |
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
9E-1Z25-0980-0294 Crossed Roller Slewing Rings 890/1089/90mm Video