| 16313001 External Gear Slewing Ring Bearings (98.8*78.4*6.625inch) For Log Loaders And Feller Bunchers | R:48 mm; Number of teeth:16; 1:DIN 8187; Bearing number:KSR16-L0-08-10-16-22; C:18,1 mm; Size (mm):16.2x40x18.3; Dk:70,5 mm; C1:7 mm; d:16,2 mm; Width (mm):18,3; |
| RE2508UUC0 High Precision Cross Roller Ring Bearing | C:118 mm; D:1120 mm; Width (mm):118; Size (mm):850x1120x118; Bore Diameter (mm):850; d:850 mm; B:118 mm; Brand:ISO; Outer Diameter (mm):1120; Bearing number:N19/850; |
| 1797/885G Slewing Bearing 885x1150x115mm | d:8 mm; Weight:0,0026 Kg; (Grease) Lubrication Speed:21000 r/min; Bearing number:K8X11X13; Bore Diameter (mm):8; Brand:FBJ; Basic static load rating (C0):5,2 kN; D:11 mm; Outer Diameter (mm):11; Size (mm):8x11x13; |
| 2780DBD101t Four-point Contact Ball Slewing Bearing With Innter Gear | Bearing number:SAA50TXE-2LS; Brand:SKF; Basic dynamic load rating (C):440 kN; Angle:6 °; Thread (G):M45x3 Tolerance 6g; r1 min.:0,6 mm; Bore Diameter (mm):50; C1 max:31 mm; dk:66 mm; l2 max.:244 mm; |
| JT-G19-1111G RCT Clutch Release Bearing | Category:Precision Ball Beari; ra - max.:0.6 mm; Preload class C:168 N/micron; Preload class D - GD:640 N; Calculation factor f2A:1; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor - Y0:0.76; Calculation factor e:0.68; Calculation factor f2B:1.04; Calculation factor - f2C:1.08; |
| 06-0574-09 External Gear Slewing Ring Bearing(700*479*77mm)for Construction Machinery | Brand:IKO; C2:3,4 mm; Category:Bearings; Basic static load rating (C0):76,7 kN; Minimum Buy Quantity:N/A; Bearing number:TAM 3730; Fw:37 mm; Inventory:0.0; Weight:0,11 Kg; Size (mm):37x47x30; |
| RE13025UUC0 High Precision Cross Roller Ring Bearing | r_min:0.6; C2:0,4 mm; DA_:7.5; Cx:0.4; Size (mm):45x75x40; C0:144; r min.:0,6 mm; Width (mm):40; Outer Diameter (mm):75; d:45 mm; |
| Supply VA250818N Slewing Bearing 728*940.1*60mm | Cone Part Number:3198; G2 - Heat Generation Factor (Rib-Roller End):8.8; C0 - Static Radial Rating:22800 lbf; Bearing Weight:0.6 Kg; Design Units:Imperial; Y - ISO Factor9:1.8; K - Factor7:1.76; a - Effective Center Location3:-10.2 mm; B:30.165 mm; d:28.575 mm; |
| VSU200414 Bearing 342*486*56mm | Outer Diameter (mm):62; Bore Diameter (mm):40; Bearing number:GE 40 ET 2RS; Basic dynamic load rating (C):140 kN; r2 min.:1 mm; Brand:ISB; C:22 mm; B:28 mm; Angle:6 °; r1 min.:0,6 mm; |
| SD.1155.25.00.B Four-point Contact Ball Slewing Bearing 955mmx1155mmx63mm | d2:18 mm; C1:6 mm; P:3,3 mm; Bearing number:TSM.R 6; d:6 mm; Brand:ISB; dk:9 mm; d1:8,9 mm; h1:36 mm; Weight:0,017 Kg; |
| 1787/1060G Slewing Bearing 1060x1388x109mm | d:49 mm; Bearing number:GB35001; Brand:SNR; D:88 mm; Size (mm):49x88x46; Outer Diameter (mm):88; C:46 mm; B:46 mm; Bore Diameter (mm):49; Width (mm):46; |
| 92-200311/1-07202 Slewing Bearing With Internal Gear 225/418/56mm | r3,4 min.:0.3 mm; d2:14.57 mm; Precision Class:ABEC 3 | ISO P6; Da - max.:25.8 mm; internal clearance:C0; Basic static load rating - C0:3.4 kN; Size (mm):30x10x9; Contact Angle:40 Degree; closure type:Open; precision rating:ABEC 3 (ISO Cla; |
| L6-16P9ZD No Gear Slewing Rings(20.39*11.97*2.2inch) For Reclaimers | Size (mm):50x80x13; Bearing number:RB 5013; Outer Diameter (mm):80; ds:57,4 mm; a:2,5 mm; d:50 mm; Width (mm):13; r min.:1 mm; Dp:64 mm; Bore Diameter (mm):50; |
| 9E-1B20-0545-1247 Four-point Contact Ball Slewing Bearing With External Gear Teeth | a:20,7 mm; B1:40 mm; Bore Diameter (mm):50; Brand:ISO; Size (mm):50x90x40; Width (mm):40; Outer Diameter (mm):90; D:90 mm; d:50 mm; Angle (α):25 °; |
| Crossed Roller Slewing Bearings Without Gear Teeth RKS.921155203001 | Bearing number:SCE1212; Bearing Type:Cage Retained Roller; Bore Diameter (mm):19,05; Width (mm):19,05; Weight (g):21.00; Outer Dia (D):1.0000; Width (B):0.7500; Dynamic Load Rating (Cr):3,450; Brand:AST; Material - Drawn cup: Hardened carbon steel alloy, Rollers:52100 Chrome steel o; |
| Slewing Bearing RKS.062.25.1314 | nB:6700 1/min / Referen; Bore Diameter (mm):50; Bearing number:NUP210-E-TVP2; m:0,517 kg / Weight; Da max:83 mm; B:20 mm; d:50 mm; d1:64 mm; Cur:11200 N; Brand:FAG; |