No. | Brand | b | B | e | f | m | s | Q | X |
10x48 | - | - | - | - | - | - | - | - | - |
12 | - | - | 42 mm | - | - | - | - | - | - |
(L17 | - | - | 7,000 mm | - | - | - | - | - | - |
160 | - | - | - | - | - | - | - | - | - |
309S | TRW | - | - | - | - | - | - | - | - |
20238-MB | - | - | - | - | - | - | - | - | - |
4 | - | - | 18 mm | - | - | - | - | - | - |
(2 | - | - | 27,000 mm | - | - | - | - | - | - |
1600 | - | - | - | - | - | - | - | - | - |
SSR-15XW | thk | - | 63,5 mm | - | - | - | - | - | - |
RAK1 | Timken | - | 72 mm | - | - | - | - | - | - |
A-35131-SET | - | - | 43,7 mm | 1,1 mm | - | - | - | - | - |
60cbm | - | - | - | - | - | - | - | - | - |
EX220-5 9180319 | - | - | - | - | - | - | - | - | - |
100% | INA | - | - | - | - | - | - | - | - |
E345C | - | - | 28 mm | - | - | - | - | - | - |
2800W | - | - | 150 mm | - | - | - | - | - | - |
1pcs | - | - | - | - | - | - | - | - | - |
PC138US-8 | - | - | - | - | - | - | - | - | - |
IP65 | - | - | - | - | - | - | - | - | - |
MSA-06-X-30 | YUKEN | - | 63,000 mm | - | - | - | - | - | - |
RKS.162.14.0844 Crossed Roller Slewing Bearings(914*736*56mm) With Internal Gear For Industrial Robot | H1:10 mm; H:30,2 mm; Bearing number:ESPE201; D2:28,6 mm; H2:57 mm; Basic dynamic load rating (C):9,55 kN; N1:19 mm; A:30 mm; s:6,5 mm; L:125 mm; |
RB80070 Cross Roller Bearing Size 800x950x70mm | da - Cone Frontface Backing Diameter:39.62 mm; Cup Part Number:333; K - Factor7:2.14; G1 - Heat Generation Factor (Roller-Raceway):26.5; Series:335; Design Units:Imperial; C1 - Dynamic Radial Rating (1 million revolutions)5:21200 lbf; Da - Cup Frontface Backing Diameter:76.96 mm; Cg - Geometry Factor:0.0676; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2570 lbf; |
10-160500/0-08040 Four-point Contact Ball Slewing Bearing 440mmx580mmx35mm | R:1,5 mm; D:53,975 mm; C:15,875 mm; Bore Diameter (mm):19.05; Brand:Timken; r:2,3 mm; d:19.05 mm; T:22,225 mm; B:21,839 mm; Size (mm):19.05x53.975x22.225; |
E.950.20.00.C Slewing Bearing With Outer Gear 734x950.4x56mm | Basic static load rating (C0):39,5 kN; Bearing number:K 22x32x24; Ew:32 mm; Bore Diameter (mm):22; Weight:0,0434 Kg; Fw:22 mm; Bc:24 mm; Basic dynamic load rating (C):33,5 kN; Brand:NBS; Outer Diameter (mm):32; |
China XSI 201455N Cross Roller Bearing 1310*1555*80mm | D:72 mm; C1:5,5 mm; Outer Diameter (mm):72; d:30 mm; Width (mm):42,9; Size (mm):30x72x42.9; Minimum Buy Quantity:N/A; Bore Diameter (mm):30; S:17,5 mm; Static load rating radial (C0):15,4 kN; |
16382001 Internal Gear Slewing Ring Bearings (125.62*106.333*8.38inch) For Stackers And Reclaimers | B:25,000 mm; d:45,000 mm; Bearing number:N309E; D:100,000 mm; Width (mm):25,000; Size (mm):45x100x25; Outer Diameter (mm):100,000; C:25,000 mm; Bore Diameter (mm):45,000; Brand:NTN; |
12-200311/1-02202 Slewing Bearing With Internal Gear 225/386/56mm | Size (mm):130x190x80; Basic static load rating (C0):790 kN; D1:186 mm; Width (mm):80; Weight:7,5 Kg; m:4,2 mm; t:1,8 mm; C1:71,2 mm; x:64 mm; C:79 mm; |
E.850.20.00.B External Gear Light Type Slewing Ring Bearing(838.1*672*56mm) For Food Industry Machinery | Angle:7 °; Basic dynamic load rating (C):99 kN; h1:105 mm; d2:94 mm; d:40 mm; l4 max.:155 mm; b:33 mm; l3 min.:56 mm; r min.:0,6 mm; d4:56,5 mm; |
PC400-7 Excavator Komatsu Three-Row Slewing Bearing 1563*1240*152 | R:2,5 mm; H:7 mm; da:125 mm; Size (mm):101.6x190x100; Width (mm):100; F:8 mm; Weight:11,08 Kg; Bearing number:180101X/180190H; C:84 mm; Brand:Gamet; |
PC100-5 Excavator KOMATSU Double Row Slewing Bearing 1111*873*75mm | h1:30 mm; Basic dynamic load rating (C):4,2 kN; L4:39 mm; d:6 mm; L3:14 mm; C1:6,75 mm; dk:12,700 / mm; Bore Diameter (mm):6; W:11 mm; d3:10 mm; |
134.25.560 Slewing Bearing 426x694x148mm | Fw:3 mm; Basic dynamic load rating (C):1,43 kN; Weight:0,0004 Kg; Brand:CX; Outer Diameter (mm):6; Bore Diameter (mm):3; (Grease) Lubrication Speed:47000 r/min; Ew:6 mm; Bearing number:K03x06x07; Width (mm):7; |
SD.1055.25.00.B Four-point Contact Ball Slewing Bearing 855mmx1055mmx63mm | Basic static load rating - C0:14600 kN; r1,2 - min.:3 mm; F:504 mm; D1:562.3 mm; r3,4 - min.:3 mm; Basic dynamic load rating - C:5500 kN; r3,4 min.:3 mm; Bearing number:BC4-8003/HA1VA907; Fatigue load limit - Pu:1270 kN; Mass bearing:240 kg; |
Slewing Bearing With Internal Gear RKS.062.25.1204 | Weight:0,005 Kg; d:7 mm; D:15 mm; Bore Diameter (mm):7; Basic dynamic load rating (C):3,55 kN; Bearing number:AXZ 5,5 7 15; Brand:Timken; Outer Diameter (mm):15; Width (mm):5,5; T:5,5 mm; |
06-0980-09 External Gear Slewing Ring Bearing(1144*869*100mm)for Construction Machinery | Brand:FAG; d:35 mm; C:13 mm; B:13 mm; Outer Diameter (mm):55; Bore Diameter (mm):35; Width (mm):13; Bearing number:61907RRAH01; D:55 mm; Size (mm):35x55x13; |
5 mm x 8 mm x 2 mm BFKB353282/HA4 Crossed Roller Bearing | Size (mm):5 mm x 8 mm x 2 mm ; Bearing number:NU 1076 MA; s:10.8 mm; operating temperature range:Maximum of +300; Category:Cylindrical Roller B; Noun:Bearing; Separable:Inner Ring - Both Si; Calculation factor kr:0.15; Rolling Element:Cylindrical Roller B; Fatigue load limit Pu:170 kN; |
133.45.2500 Slewing Bearing 2279x2721x231mm | m:89,3 kg / Weight; Brand:INA; Bore Diameter (mm):200; d:200 mm; Cr:2340000 N / Dynamic; Bearing number:LSL192340-TB; D:420 mm; d1:265,7 mm; Width (mm):138; s:7 mm / Axial displac; |
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
I.850.20.00.C Slewing Bearing With Internal Gear 649.2x848x56mm Video