| No. | Brand | b | B | e | f | m | s | Q | X |
| 460B | - | - | - | - | - | 1,08 kg / Weight | - | - | - |
| 125 | fag | - | 15 mm | - | - | - | - | - | - |
| ZX330 | - | - | - | - | - | - | - | - | - |
| K3V180DTP | - | - | 65 mm | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| WB000049 | Timken | - | 15,24 mm | - | - | - | - | - | - |
| 512013 | Timken | - | - | - | - | - | - | - | - |
| 5018 | - | - | 31,75 mm | - | - | - | - | - | - |
| CAT245 | - | - | - | - | - | - | - | - | - |
| 16 | - | - | - | - | - | - | - | - | - |
| T5 | - | - | - | - | - | - | - | - | - |
| 30X47X30 | - | - | 21 mm | - | - | - | - | - | - |
| 50kg | - | - | 31 mm | - | - | - | - | - | - |
| 2056 | - | - | - | - | - | - | - | - | - |
| PC350-5 | - | - | 36 mm | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| MSK050-0600-NN-M1-AG1-NNNN | Rexroth | - | - | - | - | - | - | - | - |
| Pc300-8 | - | - | 23 mm | - | - | - | - | - | - |
| ZS4-L25 | - | - | 40 mm | 0,27 | - | 3,18 kg / Weight | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| V50 | - | - | - | - | - | - | - | - | - |
| 2.75mm-4.75mm | INA | - | 72 mm | - | - | - | - | - | - |
| 02 0308 01 Slewing Ring Bearing | Aa - Cage-Cone Backface Clearance:1.3 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:30400 N; Db - Cup Backface Backing Diameter:133.10 mm; a - Effective Center Location3:-10.2 mm; B - Cone Width:39 mm; Series:33019; Da - Cup Frontface Backing Diameter:139.95 mm; Bearing Weight:2.2 Kg; Cage Type:Stamped Steel; Cup Part Number:Y33019; |
| SD.616.20.00.B Four-point Contact Ball Slewing Bearing 472mmx616mmx56mm | (Oil) Lubrication Speed:8000 r/min; Size (mm):x63.500x19.050; a:7.4 mm; (Grease) Lubrication Speed:6000 r/min; T:20.638 mm; Basic dynamic load rating (C):45000 kN; r2 min.:1.3 mm; Calculation factor (Y0):0.94; B:19.050 mm; Outer Diameter (mm):63.500; |
| RKS.211440101001 Crossed Roller Slewing Bearings(1172*961*90mm) With Internal Gear Teeth For Industrial Robot Arm | C:16,000 mm; Bearing number:6010FT150ZZ; Width (mm):16,000; Size (mm):50x80x16; Outer Diameter (mm):80,000; Bore Diameter (mm):50,000; B:16,000 mm; D:80,000 mm; Brand:SNR; d:50,000 mm; |
| 9E-1B40-0613-0632 Four-point Contact Ball Slewing Bearing With External Gear Teeth | Ew:38 mm; Outer Diameter (mm):38; Bore Diameter (mm):30; Weight:0.036 Kg; Bc:18 mm; Basic static load rating (C0):33 kN; (Grease) Lubrication Speed:8500 r/min; Fw:30 mm; Brand:NTN; Basic dynamic load rating (C):25 kN; |
| VU200220 Slewing Ring Bearing(302*138*46mm)for Filling Machine | Cua:4000 N / Fatigue lim; nG:13000 1/min / Limiti; Category:Thrust Roller Bearin; Other Features:With Grease Retainin; dw:15 mm / Tolerance: E; Outer Diameter (mm):24; Cur:2320 N / Fatigue lim; Outside Diameter:0.945 Inch | 24 Mill; Weight / Kilogram:0; |
| 12-200741/1-02243 Slewing Bearing With Internal Gear 648/816/56mm | da - Cone Frontface Backing Diameter:2.32 in; a - Effective Center Location4:-0.38 in; K - Factor8:1.45; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:79200 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:45500 lbf; C0 - Static Radial Rating:45400 lbf; B - Cone Width:1.4375 in; db - Cone Backface Backing Diameter:2.4 in; Ab - Cage-Cone Frontface Clearance:0.09 in; Cg - Geometry Factor:0.0999; |
| SK100 Excavator KOBELCO Three Row Slewing Bearing 1092*878*85 | Basic dynamic load rating (C):385 kN; da2 (min):124 mm; Limiting Speed - Grease:3,700 rpm; ra max.:1 mm; 2B:100 mm; d:110 mm; Size (mm):110x240x50; Width (mm):50; Bore Type:Cylindrical Bore; ra (max):2.5 mm; |
| SD.1155.25.00.B No Gear Slewing Ring Rotary Bearing (1155*955*63mm) For Slewing Tower Cranes | B:15 mm; Outer Diameter (mm):56; Brand:NACHI; Bearing number:23BC05S4; Size (mm):23x56x15; D:56 mm; Bore Diameter (mm):23; Width (mm):15; d:23 mm; |
| JT15 Double Row Tapered Roller Bearing With Direct Mounting | Cage Material:Steel; Outside Diameter:3.74 Inch | 95 Milli; EAN:0029176026683; Bearing number:6815VV; manufacturer upc number:029176026683; Prod_Type3:DGBB_SR_VV; SBRG:18; ALPHA_:0; C0:13.9; D:95 mm; |
| VSI250755 Bearing 610*855*80mm | Housing Bore Dia. (Dh) - 75 +0.030 / -0:75 +0.030 / 0; Lube Hole Dia. (dl):8.000; ID Chamfer Length (Ci):0.800; Brand:AST; Material:Carbon steel shell w; Bearing Length, Nominal (B):40.000; Average Clearance (Cd):0.1630; ID Chamfer Angle (B deg.):45; Bearing Outside Diameter, Nominal(Do):75.000; OD Chamfer Length (Co):1.800; |
| CRBH5013A Crossed Roller Bearing 50X80X13mm | K:3 mm; Outer Diameter (mm):160; Bearing number:22218 K; Brand:ISB; Weight:3,4 Kg; C:40 mm; d:90 mm; (Grease) Lubrication Speed:4054,5 r/min; D:160 mm; Basic dynamic load rating (C):319 kN; |
| 90-200311/0-07002 Four-point Contact Ball Slewing Bearing 204x418x56mm | Brand:ZEN; C:30,2 mm; B:30,2 mm; Bearing number:3209; D:85 mm; Width (mm):30,2; d:45 mm; Bore Diameter (mm):45; (Grease) Lubrication Speed:4500 r/min; Weight:0,709 Kg; |
| SSM1800/50BHH Slewing Bearing For 80T Crawler Crane | C:20 mm; Basic static load rating (C0):16,7 kN; Size (mm):16x24x20; Width (mm):20; Basic dynamic load rating (C):11,9 kN; Outer Diameter (mm):24; Bearing number:RNAFW 162420; Weight:0,032 Kg; Db:16,6 mm; Da max.:22 mm; |
| 12-200641/1-02232 Slewing Bearing With Internal Gear 546/716/56mm | Calculation factor - f2B:1.03; Limiting speed for grease lubrication:40000 r/min; db min.:39.6 mm; Calculation factor - f:1.06; Db max.:57.8 mm; Outer Diameter (mm):35; Preload class A GA:60 N; Preload class A:35 N/micron; Fatigue load limit - Pu:0.28 kN; Number of balls z:17; |
| 9E-1Z40-1584-26 Crossed Roller Slewing Rings 1430/1808/141mm | F:130 mm; r max:2 mm; d:120 mm; B:46 mm; D:180 mm; Bearing number:120RT30; E:170 mm; Bore Diameter (mm):120; Brand:Timken; Outer Diameter (mm):170; |
| L6-16P9ZD No Gear Slewing Rings(20.39*11.97*2.2inch) For Reclaimers | Size (mm):50x80x13; Bearing number:RB 5013; Outer Diameter (mm):80; ds:57,4 mm; a:2,5 mm; d:50 mm; Width (mm):13; r min.:1 mm; Dp:64 mm; Bore Diameter (mm):50; |
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
AT14316 Slewing Bearing With Outer Gear 715x976x98mm Video