No. | Brand | b | B | e | f | m | s | Q | X |
1700 | - | - | - | - | - | - | - | - | - |
1765 | - | - | 20 mm | - | - | 0,517 kg / Weight | - | - | - |
F696ZZ | - | - | - | - | - | - | - | - | - |
21%N | - | - | 7,92 mm | - | - | - | - | - | - |
15mm | - | - | - | 2,5 mm | - | - | - | - | - |
62AX188, | Timken | - | 36 mm | - | - | - | - | - | - |
4'x8' | - | - | 74 mm | - | - | 44,6 kg / Weight | - | - | - |
1pcs | - | - | - | - | - | - | - | - | - |
20.5% | - | - | - | 0,25 | - | - | - | - | - |
220g | - | - | 19,000 mm | - | - | - | - | - | - |
7-3-3 | - | - | - | - | - | - | 12 mm | - | - |
21% | - | - | - | - | - | - | - | - | - |
6411 | SKF | - | - | - | - | - | - | - | - |
20x27x4 | INA | - | - | - | - | - | - | - | - |
8mm/12mm | INA | - | - | - | - | - | - | - | - |
100% | - | - | - | - | - | - | - | - | - |
18mm | - | - | 165 mm | - | - | - | - | - | - |
15mm | INA | - | 46 mm | - | - | - | - | - | - |
M5X0.8 | - | - | - | - | - | - | - | - | - |
600 | fag | - | - | - | - | - | - | - | - |
10x | - | - | - | - | - | - | - | - | - |
18mm | - | - | 45,000 mm | - | - | - | - | - | - |
374D | - | - | - | - | - | - | - | - | - |
4X8 | - | - | - | - | - | - | - | - | - |
7312-B-JP | fag | - | - | - | - | - | - | - | - |
10 | - | - | - | - | - | - | - | - | - |
24144-E1 | - | - | 280 mm | - | - | - | - | - | - |
4mm | INA | - | 208 mm | - | - | - | - | - | - |
100% | - | - | 28 mm | - | - | - | - | - | - |
XSI141094 Bearing 984*1164*56mm | Calculation factor (e):0,74; Characteristic inner ring frequency, BPFI:9.25 Hz; (Grease) Lubrication Speed:2 900 r/min; T:36,512 mm; r1a max:3.3 mm; ra max.:3,5 mm; Static load, C0:188 kN; a:38.01 mm; C:25,4 mm; Da:102 mm; |
High Quality XIU15/844 Cross Roller Bearing 736*914*56mm | Brand:ISO; T:53,5 mm; Outer Diameter (mm):180; a:42 mm; B:60 mm; C:49 mm; Bearing number:32317; D:180 mm; Bore Diameter (mm):85; d:85 mm; |
9O-1Z40-2248-55 Crossed Roller Slewing Rings 2095/2420/135mm | Pre Install Clearance Min:0.0024 in; Thread Size J:1 1/4-7UNC; Dimension SA:4.03 in; Dimension C:5.13 in; Oil Lubrication - M/N Seal:1400 rpm; Oil Lubrication - T Seal:2400 rpm; Shaft Size :80 mm; C0 - Static Load:87200 lb; Eng Internal Radial Clearance - Min:0.0024; Grease Lubrication - T Seal:2000 rpm; |
China VI 703383N Slewing Bearing 3100*3565*154mm | Dynamic Load Rating (Cr):65,000; Brand:AST; Weight (g):207.00; Outer Width (Bo):18.0000; Mis-alignment Angle (a deg.):4; Bearing number:GEEW32ES; Outer Dia (D):52.0000; Outer Diameter (mm):52; Max. shaft corner radius, or 45 deg. chamfer (ch1):0.600; Bore Dia (d):32.0000; |
NRXT15025DD Crossed Roller Bearing | Basic dynamic load rating (C):12,6 kN; Ew:21 mm; Bc:15 mm; Basic static load rating (C0):13,6 kN; Fw:15 mm; Outer Diameter (mm):21; Brand:NSK; Bearing number:FWF-152115; Bore Diameter (mm):15; Weight:0,01 Kg; |
16326001 No Gear Slewing Ring Bearings (131.89*112.205*7.874inch) For Military Turrets | T:47,625 mm; R:5 mm; Width (mm):47,625; Outer Diameter (mm):171,45; d:88,9 mm; Size (mm):88.9x171.45x47.625; Brand:Timken; C:38,1 mm; B:48,26 mm; D:171,45 mm; |
MTO-145 No Gear Slewing Ring Bearings (11.811*5.709*1.968inch) For Work Positioners | Aa - Cage-Cone Backface Clearance:1.8 mm; r - Cup Backface To Clear Radius2:1.52 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:9630 lbf; B:23.020 mm; Cg - Geometry Factor:0.0452; Design Units:Imperial; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:1140 lbf; e - ISO Factor8:0.27; Cup Part Number:09196; R - Cone Backface To Clear Radius1:1.270 mm; |
CRB4010 NRXT4010 Cross Roller Bearing Size 40x65x10 Mm CRB 4010 NRXT 4010 | C0 - Static Radial Rating:13200 N; Limiting Speed (Grease):20000 rpm; Da - Outer Ring Backing Diameter:63.400 mm; Full Timken Part Number:2MM9309WICRDUH; Cage Type:CR - Phenolic Outer; Contact Angle:15 º; Bearing Width:12 mm; Limiting Speed (Oil):40000 rpm; r - Outer Ring To Clear Radius3:0.6 mm; Ce - Dynamic Radial Rating1:16800 N; |
L9-46N9Z Slewing Bearing(51.18*39.76*3.54inch) With Internal Gears For Industrial Turntables | Bearing number:63208-2RS; Brand:ISO; Bore Diameter (mm):40; Width (mm):30,2; Weight:0,581 Kg; B:30,2 mm; d:40 mm; Outer Diameter (mm):80; C:30,2 mm; Size (mm):40x80x30.2; |
RKS.060.25.1754 Four Point Contact Slewing Bearings(1862*1646*68mm) Without Gear For Stacker Crane | Fw:20 mm; Bc:13 mm; (Grease) Lubrication Speed:15000 r/min; Weight:0,014 Kg; Brand:Timken; Outer Diameter (mm):26; Basic static load rating (C0):15,9 kN; Bearing number:K20X26X13H; Bore Diameter (mm):20; Basic dynamic load rating (C):13,4 kN; |
CRBH3010AC1 Bearing | d1:220 mm; Bore Diameter (mm):200; Bearing number:GEG200ES; C:100 mm; Width (mm):165; B:165 mm; Size (mm):200x320x165; Outer Diameter (mm):320; Basic dynamic load rating (C):2320 kN; Angle:15 °; |
Crossed Roller Slewing Bearing With External Gear RKS.425060201001 | Category:Single Row Ball Bear; Weight:0.009 Kg; da min.:12 mm; Size (mm):10x22x6; Enclosure:2 Seals; Noun:Bearing; Enclosure Type:Contact Seal; ra max.:0.3 mm; Manufacturer Name:NACHI; |
SSM1116/40CHH Slewing Bearing For 37M Pump Truck | Manufacturer Item Number:SYH 3/4 WF; Mounting Method:Eccentric Collar; A:32 mm; Manufacturer Name:SKF; Minimum Buy Quantity:N/A; Inch - Metric:Inch; Other Features:Single Row | Standar; Category:Pillow Block; Seals:M Seal; d:19.05 mm; |
35 mm x 62 mm x 9 mm 01 0342 00 Slewing Ring Bearing | Bearing number:DL 15 12; Basic static load rating (C0):16,4 kN; Basic dynamic load rating (C):9,4 kN; Weight:0,011 Kg; Bore Diameter (mm):15; (Grease) Lubrication Speed:13000 r/min; Brand:Timken; D:21 mm; Outer Diameter (mm):21; Fw:15 mm; Size (mm):35 mm x 62 mm x 9 mm ; |
RB20030 XRB20030 Cross Roller Bearing Size 200x280x30 Mm RB 20030 XRB 20030 | r:1,5 mm; R:6,4 mm; T:158,75 mm; Outer Diameter (mm):381; Size (mm):269.875x381x158.75; Bearing number:M252349/M252310CD+M2; d:269,875 mm; C:123,825 mm; Width (mm):158,75; D:381 mm; |
XRA12008 Cross Roller Bearing Size 120x136x8mm | e - ISO Factor8:0.42; da - Cone Frontface Backing Diameter:12.64 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:351000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:91000 lbf; Y2 - ISO Factor10:2.42; Ab - Cage-Cone Frontface Clearance:-0.02 in; T - Bearing Width across Cups:5.2499 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:52200 lbf; |
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
I.1000.22.00.A-T Slewing Ring Bearing Video