| No. | Brand | b | B | e | f | m | s | Q | X |
| 606ZZ | - | - | 5 mm | - | - | - | - | - | - |
| 1 | FAFNIR | - | 20 mm | - | - | - | - | - | - |
| 6001-2RSH/C3 | - | - | - | - | - | - | - | - | - |
| 800 | - | - | - | - | - | - | - | - | - |
| 50pc | - | - | 18 mm | - | - | - | - | - | - |
| CL2B-DAL9 | - | - | - | - | - | - | - | - | - |
| Q235 | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 22338MB | Rollway | - | - | - | - | - | - | - | - |
| 4x10x4 | - | - | - | - | - | - | - | - | - |
| G10 | INA | - | - | - | - | - | - | - | - |
| 6125SFM75 | John Deere | - | - | - | - | - | - | - | - |
| 2mm | - | - | 65,1 mm | - | - | - | - | - | - |
| 6008 | SKF | - | - | - | - | - | - | - | - |
| 21 | INA | - | - | - | 0,85 mm | - | - | - | - |
| can-50025) | - | - | - | - | - | - | - | - | - |
| 10pc | - | - | - | - | - | - | - | - | - |
| 1150*730mm | - | 16.7 mm | - | - | - | - | - | - | - |
| 1050 | - | - | - | - | - | - | - | - | - |
| 60072RSC3GXM | koyo | - | - | - | - | - | - | - | - |
| 16341001 External Gear Slewing Ring Bearings (36.333*24.5*4.69inch) For Wind Turbines | Brand:NTN; Characteristic rolling element frequency, BSF:7.91 Hz; Manufacturer Name:NTN; Size (mm):69.85x120x29.794; Inventory:0.0; Static load, C0:177 kN; T:29,794 mm; d1:93 mm; (Oil) Lubrication Speed:4 000 r/min; Weight / Kilogram:1.3; |
| RB35020 XRB35020 Cross Roller Bearing Size 350x400x20 Mm RB 35020 XRB 35020 | C:22 mm; d:85 mm; Brand:KBC; B:22 mm; Size (mm):85x130x22; r:1.1 mm; Bore Diameter (mm):85; Weight:0.93 Kg; D:130 mm; Basic static load rating (C0):43 kN; |
| Super Precision XA 341455N Slewing Bearing 1317*1653.6*95mm | d:16 mm; Brand:LS; Bearing number:SABP16N; B:21 mm; Bore Diameter (mm):16; |
| XSA140544-N Cross Roller Slewing Ring Bearing For Robots | Brand:KOYO; L:490 mm; Basic dynamic load rating (C):173 kN; Bore Diameter (mm):100,0125; B:108 mm; Weight:45,2 Kg; H1:51 mm; Basic static load rating (C0):141 kN; S:42 mm; J:380 mm; |
| 9E-1B25-0584-1365 Four-point Contact Ball Slewing Bearing With External Gear Teeth | C - Cup Width:47.625 mm; a - Effective Center Location3:-12.2 mm; da - Cone Frontface Backing Diameter:165.10 mm; Cup Part Number:99100W; R - Cone Backface To Clear Radius1:7.110 mm; B - Cone Width:66.675 mm; Design Units:Imperial; Cone Part Number:99590X; Db - Cup Backface Backing Diameter:227.08 mm; Aa - Cage-Cone Backface Clearance:8.6 mm; |
| PC100-3 Excavator KOMATSU Double Row Slewing Bearing 1112*872.5*75mm | Manufacturer Internal Number:70737; Category:Cylindrical Roller B; Nlim (oil):5,500 rpm; Fw:70,8 mm; Minimum Buy Quantity:N/A; Manufacturer Item Number:NU410; Retainer:Yes; Manufacturer Name:NTN; db min:73 mm; Separable:Inner Ring - Both Si; |
| 3R16-245N1 Internal Gear Heavy Duty Slewing Ring(258.46*231.496*10.55inch) For Climbing Cranes And Tower Cranes | R:3,5 mm; Outer Diameter (mm):107,95; T:65,09 mm; D:107,95 mm; Size (mm):50.8x107.95x65.09; Bore Diameter (mm):50,8; Bearing number:455-S/452D+X1S-455; d:50,8 mm; Brand:Timken; r:0,8 mm; |
| XRB50050 Cross Roller Bearing Size 500x625x50mm | Bore Diameter (mm):180; d:180 mm; ra(max):1.5; T1:58,2 mm; Coa:874; Outer Diameter (mm):250; T:58.2; R:200 mm; d1:247 mm; da min.:222 mm; |
| SX011848 Crossed Roller Bearing | Brand:SNR; Thread (G):M6x1; A:58 mm; L:175 mm; A1:25 mm; B:65 mm; A2:71,5 mm; N:31 mm; H:295 mm; Bearing number:UKFL313H; |
| RKS.060.20.0844 Four Point Contact Slewing Bearings(916*772*56mm) Without Gear For Stacker Crane | Basic static load rating (C0):810 kN; Bore Diameter (mm):170; Brand:IKO; S:3 mm; Bearing number:NA 4934; D:230 mm; Weight:7,11 Kg; Width (mm):60; da min.:179 mm; Da max.:221 mm; |
| Crossed Roller Slewing Bearing RKS.160.14.0644 | Outer Diameter (mm):85; (Grease) Lubrication Speed:22 100 r/min; D:85 mm; Basic dynamic load rating (C):14 kN; Brand:NSK; d:60 mm; Bearing number:60BER29HV1V; Weight:0,208 Kg; C:16 mm; Bore Diameter (mm):60; |
| CAT110 Excavator CATERPILLAR Double Row Sleiwng Bearing 1093*881*72mm | Width (mm):180; da min.:402 mm; Outer Diameter (mm):560; Calculation factor (e):0,29; ra max.:4 mm; (Oil) Lubrication Speed:620 r/min; Basic dynamic load rating (C):3190 kN; (Grease) Lubrication Speed:470 r/min; Calculation factor (Y1):2,32; Bearing number:24076RHAK30; |
| Good Performance XIU15/450 Cross Roller Bearing 345*531*55mm | Bearing Weight:2.1 lb; Series:435; Da - Cup Frontface Backing Diameter:3.46 in; da - Cone Frontface Backing Diameter:2.01 in; d:1.7500 in; G2 - Heat Generation Factor (Rib-Roller End):11.3; db - Cone Backface Backing Diameter:2.24 in; T - Bearing Width to Flange:0.4376 in; D1 - Flange Outer Diameter:3.9640 in; D:3.7500 in; |
| JXR637050 Crossed Roller Bearing | Cb - min.:3.5 mm; r1,2 - min.:3.6 mm; a:13 mm; Db - min.:58 mm; Calculation factor - e:0.35; rb - max.:2 mm; C:14.288 mm; r3,4 - min.:2 mm; d:31.75 mm; da - max.:38 mm; |
| 011.30.630stainless Steel Slewing Bearing With Outer Gear | Weight:5,35 Kg; d:75 mm; Width (mm):58; Outer Diameter (mm):160; r:2,5 mm; C:45 mm; Bore Diameter (mm):75; Size (mm):75x160x58; R:3 mm; Bearing number:32315; |
| CT40 Excavator CATERPILLAR Double Row Sleiwng Bearing 685*483*60mm | T:29,794 mm; B:29,007 mm; Size (mm):70x120x29.794; Basic static load rating (C0):186 kN; Width (mm):29,794; Bore Diameter (mm):70; C:24,237 mm; Brand:CX; d:70 mm; Weight:1,3 Kg; |
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
07 1304 04 Slewing Ring Bearing Video