| No. | Brand | b | B | e | f | m | s | Q | X |
| (Zhs147) | - | - | 12 mm | - | - | - | - | - | - |
| 23148-c3 | - | - | - | - | - | - | - | - | - |
| ZX330 | - | - | - | - | - | - | - | - | - |
| 20728258 | - | - | - | - | - | - | - | - | - |
| 50pc | - | - | 18 mm | - | - | - | - | - | - |
| stove(XF-8571-A) | - | - | 170 mm | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 15mm | - | - | 16,000 mm | - | - | - | - | - | - |
| 2202TV | fag | - | 22 mm | - | - | - | - | - | - |
| 32014 | koyo | - | 4,763 mm | - | - | - | - | - | - |
| HPV091 | Hitachi | - | - | - | - | - | - | - | - |
| 4TNV94 | - | - | - | - | - | - | - | - | - |
| SMN106K | FAFNIR | - | - | - | - | - | - | - | - |
| 318R-BKE | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| Swl50e | - | - | - | - | - | - | - | - | - |
| S3508.2RSR.C3 | fag | - | 14 mm | - | - | - | - | - | - |
| 17108 | - | - | 250 mm | - | - | - | - | - | - |
| 708-2L-23880 | - | - | - | - | - | - | - | - | - |
| 35j | - | - | - | - | - | - | - | - | - |
| 2.0, | - | - | 39,700 mm | - | - | - | - | - | - |
| UX125 | - | - | 123,825 mm | - | - | - | - | - | - |
| A9-25N3 Internal Gear Slewing Ring Bearing(28.75*19.543*3.38inch) For Sewage And Water Treatment Equipment | Fatigue load limit Pu:0.335 kN; Thread grub screw G2:M6x0.75; SWN:7 mm; Thread length - G1:15 mm; Housing material:Cast iron; Housing:SYFJ 505; Weight / Kilogram:0.725; Size (mm):25x38x25; H2:10 mm; Basic dynamic load rating C:14 kN; |
| RKS.221300101001 Crossed Roller Slewing Bearings(1080*886*82mm) With External Gear Teeth For Textile Machine | Basic static load rating (C0):153 kN; Basic dynamic load rating (C):128 kN; Da:105 mm; Width (mm):31,75; Bore Diameter (mm):55,753; db:63 mm; da:70 mm; B:31,75 mm; a:35,4 mm; Calculation factor (Y0):0,5; |
| VLU200414 Flange Without Gear Type Slewing Ring Bearing (518*304*56mm)for Robot Palletizer | Bore Diameter (mm):15,875; Basic dynamic load rating (C):4,65 kN; d:15,875 mm; Outer Diameter (mm):34,925; Brand:ISB; C:7,142 mm; Size (mm):15.875x34.925x7.142; D:34,925 mm; r min.:0,8 mm; B:7,142 mm; |
| H8-58E2 Outer Gear Slewing Rings(62.6*53.7*4.06inch) For Rotary Distributors | Outer Diameter (mm):18,000; Bearing number:KBK14X18X17.3; Brand:NTN; Bc:17,300 mm; Ew:18,000 mm; Fw:14,000 mm; Bore Diameter (mm):14,000; |
| 16320001 No Gear Slewing Ring Bearings (27.362*18.779*3.301inch) For Military Turrets | Enclosure:Open; ra1 max.:0,6 mm; Product Group:B00308; Rolling Element:Ball Bearing; Noun:Bearing; Weight / Kilogram:0.22; r1 min.:0,6 mm; Long Description:20MM Bore; 47MM Outs; Maximum Capacity / Filling Slot:No; |
| HS6-21E1Z External Gear Slewing Ring Bearings (25.15*17*2.2inch) For Digger Derricks | Bearing Length, Nominal (B):0.500; ID Chamfer Length (Ci):0.019; Average Clearance (Cd):0.0024; OD Chamfer Length (Co):0.026; Material:Carbon steel shell w; Flange Thickness (Sfl):0.064; Brand:AST; Shaft Dia., Nominal (d):0.7500; Flange Radius (rfl):0.040; ID Chamfer Angle (B deg.):30; |
| 9E-1B22-0343-1167 Slewing Bearing With External Gear 263.5x434x50mm | r1 min:1 mm; Da:104 mm / Tolerance:; Size (mm):80x110x16; Outer Diameter (mm):110; d:80 mm; m:0,312 kg / Weight; nG Ol:26000 1/min / Limiti; nG Fett:17000 1/min / Limiti; Bearing number:HCB71916-C-T-P4S; Cr:35500 N / Dynamic lo; |
| XSA141094-N Cross Roller Slewing Ring Bearing For Robots | flanges:(2) Inner; Rolling Element:Cylindrical Roller B; Da - max.:119 mm; Profile:Complete with Outer; Relubricatable:Yes; Weight / Kilogram:1.805; UNSPSC:31171547; da max.:113 mm; Da - min.:118 mm; Basic static load rating - C0:160 kN; |
| XSU140914 Bearing 874*1014*56mm | Width (mm):25; Inventory:0.0; Snap Ring:No; Outside Diameter:5.118 Inch | 130 Mil; Reference speed:9000 r/min; Internal Special Features:No; da max.:92 mm; d1:92.05 mm; Calculation factor - kr:0.04; d1 ≈:92.05 mm; |
| 07 0489 11 Slewing Ring Bearing | Permissible sliding velocity v min.:0 m/s; c2 min:1,2 mm; Basic dynamic load rating - radial direction C:1000 kN; Specific static load factor K0:250 N/mm²; c1 min:0,2 mm; Tolerance shaft:h8; Inventory:0.0; Category:Plain Bearings; Weight / Kilogram:0.886; D:165 mm; |
| CRBH15025A Crossed Roller Bearing | Bolt Spacing Minimum:3.721 Inch | 94.513M; Bore:0.875 Inch | 22.225; Housing Configuration:1 Piece Solid; H2:68,276 mm; Other Features:Single Row | Spheric; Thread (Q):1/8 NPT; Actual Bolt Center to Center:0 Inch | 0Millimeter; UNSPSC:31171511; H:33,351 mm; Base to Center Height:1.313 Inch | 33.35 M; |
| RKS.060.20.0644 Four Point Contact Slewing Bearings(716*572*56mm) Without Gear For Stacker Crane | Factor fo:14.4; D1 (max):120.2 mm; B:24 mm; Static Load Rating:44,000 N; da (min):79 mm; Limiting Speed - Grease:5,100 rpm; Enclosure:Single Shield with S; a (max):4.1 mm; Cy (max):6.5 mm; d:70 mm; |
| I.816.20.00.B Slewing Ring Bearings | D:66,421 mm; Bore Diameter (mm):31.75; Brand:Fersa; Outer Diameter (mm):66,421; Bearing number:2580/2520; Width (mm):25,4; d:31.75 mm; Size (mm):31.75x66.421x25.4; |
| 10-251055/0-03030 Four-point Contact Ball Slewing Bearing 955mmx1155mmx63mm | Width (mm):155,2; Weight:3,1 Kg; D:75 mm; Bore Diameter (mm):50; B:155,2 mm; Bearing number:LME50LUU; d:50 mm; Outer Diameter (mm):75; Brand:Samick; W:2,65 mm; |
| Crossed Roller Slewing Bearing RKS.160.16.1534 | Rolling Element:Ball Bearing; d1:62.75 mm; db - min.:57 mm; Ball - z:21; D1:72.3 mm; Cage Material:Phenolic; Calculation factor - fHC:1; EAN:7316571590707; Preload class B GB:250 N; |
| A24-119E11A External Gear Slewing Rings(129.067*111.19*6.75inch) For Tunnel Boring Machines | m:8,79 kg / Weight; r1 min:3 mm; Cr:221000 N / Dynamic l; nG Fett:5000 1/min / Limitin; da:178 mm / Tolerance:; ra max:2,5 mm; d:150 mm; Outer Diameter (mm):270; B:45 mm; Size (mm):150x270x45; |
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
PC100-5 Excavator KOMATSU Double Row Slewing Bearing 1111*873*75mm Video