| No. | Brand | b | B | e | f | m | s | Q | X |
| HMV110 | - | - | - | - | - | - | - | - | - |
| DH225-9 | - | - | 23 mm | - | - | - | - | - | - |
| 312S | TRW | - | - | - | - | - | - | - | - |
| 18mm | - | - | 25,654 mm | - | - | - | - | - | - |
| G10 | INA | - | - | - | - | - | - | - | - |
| 5x10x4 | - | - | 72,24 mm | - | - | - | - | - | - |
| E345C | - | - | 28 mm | - | - | - | - | - | - |
| 24.0111-0101.2 | - | - | - | - | - | - | - | - | - |
| 6202 | - | - | - | - | - | - | - | - | - |
| 5018 | - | - | 31,75 mm | - | - | - | - | - | - |
| 5182A | - | - | - | - | - | - | - | - | - |
| 320B | - | - | 48 mm | - | - | - | - | - | - |
| J-21978-1 | - | - | 42 mm | - | - | - | - | - | - |
| N25% | - | - | - | - | - | - | - | - | - |
| 1220X2440mm | - | - | 21,432 mm | - | - | - | - | - | - |
| 722 | INA | - | - | - | - | - | - | - | - |
| 600 | - | - | 22 mm | - | - | - | - | - | - |
| 4 | - | - | 16,000 mm | - | - | - | - | - | - |
| (ZH-935) | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | 16 mm | - | - | - | - | - | - |
| 2pc | - | - | 52 mm | - | - | - | - | - | - |
| A10vso140 | Rexroth | - | - | - | - | - | - | - | - |
| 1220X2440mm | - | - | 27 mm | - | - | - | - | - | - |
| Hpv055 | INA | - | - | - | - | - | - | - | - |
| L6-43E9Z Slewing Rings(46.87*38.74*2.2inch) With External Gears For Mining And Forestry Equipment | F:65 mm; Bearing number:NJ310-E-M6+HJ310-E; r4 min.:2 mm; d:50 mm; D1:92 mm; D:110 mm; r1 min.:2 mm; C:27 mm; d1:71,2 mm; r2 min.:2 mm; |
| I.1400.32.00.C Slewing Bearing With Internal Gear 1112x1400x90mm | Enclosure:Double Seal; Configuration:Single Row; B:17 mm; d:25 mm; da (min):32 mm; Bore Type:Cylindrical Bore; Dynamic Load Rating:23,600 N; Da (max):55 mm; Factor fo:12.2; D:62 mm; |
| RKS.121400101002 Crossed Roller Slewing Bearings(589*378*75mm) With External Gear Teeth For Textile Machine | Bore Diameter (mm):100; Cur:2120 N / Fatigue lim; D1:156,9 mm; B:46 mm; Brand:FAG; Y0:2,44; nG:5600 1/min / Limitin; Y1:2,33; nB:5400 1/min / Referen; Cr:98000 N / Dynamic lo; |
| XRB1250110 Cross Roller Bearing Size 1250x1500x110mm | D1:52 mm; Outer Diameter (mm):70; H:14 mm; r2 min.:0,6 mm; Basic dynamic load rating (C):45,87 kN; Bearing number:81110-TVPB; Weight:0,16 Kg; d1:70 mm; Size (mm):50x70x14; Brand:NKE; |
| Good Performance XIU15/450 Cross Roller Bearing 345*531*55mm | Bearing Weight:2.1 lb; Series:435; Da - Cup Frontface Backing Diameter:3.46 in; da - Cone Frontface Backing Diameter:2.01 in; d:1.7500 in; G2 - Heat Generation Factor (Rib-Roller End):11.3; db - Cone Backface Backing Diameter:2.24 in; T - Bearing Width to Flange:0.4376 in; D1 - Flange Outer Diameter:3.9640 in; D:3.7500 in; |
| RK6-16E1Z External Gear Slewing Ring Bearings (19.9*11.97*2.205inch) For Stretch Wrapping Machines | Cr:720000 N / Dynamic l; da min:170,2 mm; ns:12,2 mm; Y2:4,62; ds:6,3 mm; Da max:229,8 mm; Brand:FAG; ra max:2,1 mm; Size (mm):160x240x60; rmin:2,1 mm; |
| 1055-01461,EC140B,EC140CL Excavator Slewing Bearing | Basic dynamic load rating (C):255 kN; D:340 mm; Bearing number:6238-M; Weight:21,8 Kg; Outer Diameter (mm):340; Basic static load rating (C0):282 kN; C:55 mm; d:190 mm; r1 min.:4 mm; r2 min.:4 mm; |
| 16326001 No Gear Slewing Ring Bearings (131.89*112.205*7.874inch) For Military Turrets | T:47,625 mm; R:5 mm; Width (mm):47,625; Outer Diameter (mm):171,45; d:88,9 mm; Size (mm):88.9x171.45x47.625; Brand:Timken; C:38,1 mm; B:48,26 mm; D:171,45 mm; |
| 16283001 No Gear Slewing Ring Bearings (29.75*18.62*7inch) For Large Cranes | Y - ISO Factor9:1.71; B:19.749 mm; Db - Cup Backface Backing Diameter:55.12 mm; Da - Cup Frontface Backing Diameter:59.44 mm; Cup Part Number:15250X; R - Cone Backface To Clear Radius1:1.270 mm; Cone Part Number:15115; C1 - Dynamic Radial Rating (1 million revolutions)5:13500 lbf; Ab - Cage-Cone Frontface Clearance:2.5 mm; r - Cup Backface To Clear Radius2:1.52 mm; |
| Supply XA 221821N Slewing Bearing 1714*2013.1*100mm | Bore Diameter (mm):41,275; Basic static load rating (C0):55,1 kN; B:17,384 mm; Outer Diameter (mm):76,2; Factor (G1):19,2; Basic dynamic load rating (Ca90):9,63; C2:3,571 mm; Basic dynamic load rating (C90):11,5; D1:80,863 mm; db:49 mm; |
| L6-22E9Z Slewing Rings(25.15*17.09*2.2inch) With External Gears For Mining And Forestry Equipment | Material:52100 chrome steel o; Bore Diameter (mm):22; Width (B):0.6100; Weight (g):118.00; Outer Width (Bo):0.4750; Bearing Type:single row assembly; Inner Width (Bi):0.6550; Outer Diameter (mm):45,2374; Width (mm):15,494; Radius (min) (rs1):0.051; |
| 3R10-125P1B No Gear Heavy Duty Slewing Bearing(133.94*116.54*7.24inch) For Large Industrial Turntables | da - Inner Ring Backing Diameter:454.000 mm; Bearing Weight:71.9 Kg; Cg - Geometry Factor8:0.1485; e - ISO Factor3:0.16; Cage Material:Brass; B - Inner Ring Width:106 mm; Y0 - ISO Factor4:4.14; R - Inner Ring To Clear Radius1:3.0 mm; C0 - Static Radial Rating:4240000 N; D:560.000 mm; |
| CRBC40035UU Crossed Roller Bearing | r - Outer Ring To Clear Radius3:0.3 mm; Cage Type:CR - Phenolic Outer; Ce - Dynamic Radial Rating1:4980 N; Bearing Width:9 mm; Contact Angle:25 º; Limiting Speed (Oil):115800 rpm; d:15 mm; D:32 mm; Limiting Speed (Grease):57900 rpm; Bearing Weight:0.027 Kg; |
| BFKB353203/HA4 Crossed Roller Bearing | Grease lub.:6400; (Refer.)Mass(kg):0.298; B:20 mm; da min.:35 mm; Width (mm):20; Weight:0.298 Kg; (Oil) Lubrication Speed:8500 r/min; ra(max):1; Cu:1.50; Brand:KOYO; |
| 33 0941 01 Light Series Solid Section No Gear Slewing Ring Bearing(1016*872*56mm)for Stacker Crane | Angle:6 °; Size (mm):50x75x35; Bearing number:SA 50 ES 2RS; dk:66 mm; Width (mm):35; Bore Diameter (mm):50; d2:112 mm; Outer Diameter (mm):75; d1:56 mm; Brand:ISB; |
| SSM1600/50 Slewing Ring Bearing | Size (mm):200x420x138; K:12 mm; Brand:ISB; (Grease) Lubrication Speed:1147,5 r/min; B:138 mm; C:138 mm; d:200 mm; Basic static load rating (C0):2842 kN; Bearing number:22340 K; Width (mm):138; |
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
JC17-1 Double Row Tapered Roller Bearing Direct Mounting Video