| No. | Brand | b | B | e | f | m | s | Q | X |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 12765 | Parker | - | - | - | - | - | - | - | - |
| 44-022 | Parker | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| A2FO | Rexroth | - | 38,000 mm | - | - | - | - | - | - |
| 1209 | SKF | - | 15 mm | - | - | - | - | - | - |
| 30%, | - | - | - | - | - | - | - | - | - |
| 15kg | - | - | - | - | - | - | - | - | - |
| CM160AX-117070 | Parker | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | 43 mm | - | - | - | - | - | - |
| [2rs] | - | - | 19 mm | - | - | - | - | - | - |
| 24 | - | 1.9 mm | - | 1 mm | - | 6 mm | 8,5 mm | - | - |
| x201 | - | - | 39,5 mm | - | - | - | - | - | - |
| 1220X2440mm | - | - | 27 mm | - | - | - | - | - | - |
| NRVH-12S | Danfoss | - | 68 mm | - | - | - | - | - | - |
| B522ADB42C | Parker | - | 55 mm | - | - | - | - | - | - |
| SU002-00168 | - | - | 55 mm | - | - | - | - | - | - |
| Q235 | - | - | - | - | - | - | - | - | - |
| 1X | - | - | 12,7 mm | - | - | - | - | - | - |
| 516005 | Timken | - | 36,000 mm | - | - | - | - | - | - |
| 2016 | - | - | 8 mm | - | - | - | - | - | - |
| SMN106K | FAFNIR | - | - | - | - | - | - | - | - |
| NY-QM4038 | - | - | 38 mm | - | - | - | - | - | - |
| 20ft | - | - | 41 mm | - | - | - | - | - | - |
| UCFL207 | - | - | - | - | - | - | - | - | - |
| 304 | - | - | - | - | - | - | - | - | - |
| N2o | - | - | 35 mm | - | - | - | - | - | - |
| SD.1100.32.00.C Flange Light Type Slewing Ring Gear(1100*805*90mm) For Truck Trailer | Dimension N:14.875 in; Dimension V:0.1 in; Bearing - Housing - Seal:MSE504BRHRSS; Support Type:Round Flange; Note:This product line wa; Series Type:Medium Series; Dimension P:1.0 in; Bearing Type:Split Cylindrical Re; Dimension T:20.0 in; Seal Type:Viton Single Lip; |
| XR855056 Crossed Roller Bearing | d:806,45 mm; Outer Diameter (mm):1025,525; H:914,4 mm; Width (mm):127; D:1025,525 mm; d1:873,12 mm; E:914,4 mm; T:127 mm; D1:933,45 mm; Bearing number:317TVL307; |
| 9E-1B20-0223-1140 Slewing Bearing With External Gear Teeth 145x316x50mm | d:190 mm; B:55 mm; Bearing number:QJ 238; Angle (α):35 °; da min.:208 mm; Bore Diameter (mm):190; (Grease) Lubrication Speed:1 400 r/min; ra max.:3 mm; C:55 mm; Width (mm):55; |
| 1797/3230G2Y Slewing Bearing 3230x4100x240mm | C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:76900 lbf; Design Units:Imperial; Cone Part Number:570; G2 - Heat Generation Factor (Rib-Roller End):24; r - Cup Frontface To Clear Radius2:0.06 in; Cg - Geometry Factor12:0.117; Series:565; C - Double Cup Width:2.5625 in; Ab - Cage-Cone Frontface Clearance:0.11 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:11400 lbf; |
| DH500-7 Excavator DAEWOO Double Row Sleiwng Bearing 1682*1319*138mm | Cone Part Number:X33112; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:28600 N; Ab - Cage-Cone Frontface Clearance:3.3 mm; Cg - Geometry Factor:0.102; da - Cone Frontface Backing Diameter:67.06 mm; Y - ISO Factor9:1.51; B - Cone Width:30.000 mm; K - Factor7:1.47; Aa - Cage-Cone Backface Clearance:1.8 mm; Db - Cup Backface Backing Diameter:89.92 mm; |
| XU080120 Cross Roller Slewing Ring Bearing For Machine Tools | B:155 mm; Width (mm):155; Brand:ISB; r2 min.:1,1 mm; d:180 mm; Basic dynamic load rating (C):3000 kN; Outer Diameter (mm):290; r1 min.:1,1 mm; Weight:35,5 Kg; Bore Diameter (mm):180; |
| XRB12020 NRXT12020 Cross Roller Bearing Size 120x170x20 Mm XRB 12020 NRXT 12020 | Bearing UPC:013992039293; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension M :5-7/8 in; Bearing Number:MSE411BX; Cor - Static Load Rating:157566 lbf; Bolt Size:4 x 1; Series Type:Medium Series; Seal Type:Felt Type; Cr - Dynamic Load Rating:118084 lbf; Dimension J2 :15-5/8 in; |
| 720DBS207y Four-point Contact Ball Slewing Bearing With External Gear | D:5.5000 in; r - Cup Backface To Clear Radius1:0.190 in; Cg - Geometry Factor:0.13; Da - Cup Frontface Backing Diameter:5.25 in; Design Units:Imperial; Series:575; Y - ISO Factor3:1.49; e - ISO Factor2:0.4; C - Cup Width:1.1250 in; Cup Part Number:572XS; |
| Crossed Roller Slewing Bearing With External Gear RKS.222500101001 | Outer Diameter (mm):125; Bore Diameter (mm):70; Brand:FBJ; d:70 mm; D:125 mm; B:31 mm; Weight:1,54 Kg; (Grease) Lubrication Speed:4500 r/min; Size (mm):70x125x31; Width (mm):31; |
| 08 0270 04 Slewing Ring Bearing | d:36,513 mm; Size (mm):36.513x72x42.9; m:0,44 kg / Weight; C:20 mm; DSP:72 mm; Cr:27500 N / Dynamic lo; d1:46,84 mm; Bearing number:UC207-23; B:42,9 mm; |
| SH60-1 Excavator SUMITOMO Three Row Slewing Bearing 765*562*97mm | Outer Diameter (mm):12,7; Basic static load rating (C0):0,49 kN; Basic dynamic load rating (C):1,43 kN; Weight:0,005 Kg; d:4,762 mm; D:12,7 mm; B:3,96 mm; Bore Diameter (mm):4,762; C:3,96 mm; Bearing number:A33KDD5; |
| HS6-29P1Z No Gear Slewing Ring Bearings (33.4*25*2.2inch) For Bottle Filling Machines | G:22 mm; o:15,4 mm; Bearing number:SIL12T/K; J:17,5 mm; F:50 mm; A:32 mm; Thread (G):M12; M:12 mm; Bore Diameter (mm):12; Brand:CRAFT; |
| VSU200644 Slewing Ring Bearing(716*572*56mm)for Packaging Systems | Basic dynamic load rating - C:90.4 kN; C1:13.3 mm; Calculation factor - f1:0.98; Preload class C GC:2240 N; Width (mm):24; Calculation factor - f2A:1; Calculation factor (single, tandem) Y2:0.87; B:24 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; Gref:21.6 cm3; |
| High Precision VSA251155N Four Point Contact Ball Slewing Bearing 1055x1298x80mm | Cr:127; d:55 mm; d1:-; db(min):61.5; Cu:16.9; (Grease) Lubrication Speed:5800 r/min; Bore Diameter (mm):55; Basic static load rating (C0):122 kN; Size (mm):55x100x25; Basic dynamic load rating (C):101 kN; |
| Slewing Bearing VSI250955N 810*1055*80mm | Cb min:9 mm; C0r:395000 N / Static lo; nB:2650 1/min / Referen; Ca min:7 mm; e:0,43; Da min:152 mm; B:38 mm; Cur:59000 N / Fatigue li; da max:122 mm; Y0:0,77; |
| SK350-8 Excavator KOBELCO Three Row Slewing Bearing 1409*1131*119 | Cage Type:Stamped Steel; Y2 - ISO Factor10:3.53; Bearing Weight:4.6 lb; D:3.7500 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:12900 lbf; Ab - Cage-Cone Frontface Clearance:0.05 in; r - Cup Frontface To Clear Radius2:0.03 in; T - Bearing Width across Cones:2.4376 in; B - Cone Width:1.1772 in; e - ISO Factor8:0.28; |
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Double Row Cylindrical Roller Bearing JC5 Video