| No. | Brand | b | B | e | f | m | s | Q | X |
| outdoor,220g | - | - | - | - | - | - | - | - | - |
| EZ30 | SKF | - | 82,55 mm | - | - | - | - | - | - |
| 7008CB/HCP4AL | SKF | - | - | - | - | - | - | - | - |
| 126XX | - | - | 35 mm | - | - | - | - | - | - |
| 516005 | Timken | - | 36,000 mm | - | - | - | - | - | - |
| 0206 | - | - | 41 mm | - | - | - | - | - | - |
| 17x35x10 | - | - | - | - | - | - | - | - | - |
| MKD071B-061-KP1-KN | Rexroth | - | - | - | - | - | - | - | - |
| Seven7 | - | - | - | - | - | - | - | - | - |
| 865 | - | - | - | - | - | - | - | - | - |
| 4mm | INA | - | 208 mm | - | - | - | - | - | - |
| 470-1464N*m | Parker | - | - | - | - | - | - | - | - |
| 2x | TRW | - | 54 mm | - | - | - | - | - | - |
| N21% | - | - | 110 mm | - | - | - | - | - | - |
| 1103KLLG+COL | FAFNIR | - | 2,38 mm | - | - | - | - | - | - |
| GB-16 | - | - | - | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| 51108 | - | - | 25,000 mm | - | - | - | - | - | - |
| 10pc | - | - | - | - | - | - | - | - | - |
| 30-9-9 | - | - | 38 mm | 0,43 | - | - | - | - | - |
| Pe250x400 | - | - | 22 mm | - | - | - | - | - | - |
| 684 | - | - | 20 mm | - | - | - | - | - | - |
| 2208ETN9 | SKF | - | - | - | - | - | - | - | - |
| C4h10 | - | - | 48,26 mm | - | - | - | - | - | - |
| RB30025 XRB30025 Cross Roller Bearing Size 300x360x25 Mm RB 30025 XRB 30025 | Oil rpm:3600; DE_:185.638; Weight / LBS:3.15; outside diameter:200 mm; fillet radius:2 mm; Minimum Buy Quantity:N/A; SREN:-0.04; D_:200; fo:15.8; Outside Diameter:7.874 Inch | 200 Mil; |
| CRB30035 Bearing | Basic static load rating (C0):183 kN; a:34,5 mm; B:36,5 mm; d:45 mm; Bore Diameter (mm):45; Brand:KOYO; Bearing number:KETRD091004UR4; Weight:1,46 Kg; Calculation factor (Y0):0,43; C:27,5 mm; |
| 2596DBD104t Four-point Contact Ball Slewing Bearing With Innter Gear | Designation FAG:713610400; Designation Ruville:5432; Brand:SKF; Bearing number:VKBA 3406; Compatibility:VOLKSWAGEN / TRANSP; Designation SX:CX059; Designation SNR:R154.32; |
| STN1095/36 Slewing Bearing For EBZ318 Boring Machine | Bearing number:CRO-11217; T:322,265 mm; Brand:NTN; D:736,6 mm; Size (mm):558.8x736.6x322.265; d:558,8 mm; Outer Diameter (mm):736,6; Width (mm):322,265; Bore Diameter (mm):558,8; |
| 10-201091/0-02073 Four-point Contact Ball Slewing Bearing 1022/1166/56mm | dn:16.5 mm; Calculation factor - Y0:0.38; Preload class B GB:80 N; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor f2B:1.03; Calculation factor - fHC:1; d2:14.5 mm; r1,2 min.:0.3 mm; Gref:0.28 cm3; |
| I.880.2.20.00.A Slewing Ring Bearing | Bore Diameter (mm):79,985; D:139,992 mm; T:82,55 mm; d:79,985 mm; Outer Diameter (mm):139,992; Size (mm):79.985x139.992x82.55; Width (mm):82,55; Bearing number:4T-578/572DC+A; Brand:NTN; |
| 25 mm x 52 mm x 20.6 mm Slewing Bearing ZKLDF150 150*240*40mm | a:7,6 mm; C:23,5 mm; Width (mm):29; Brand:ISO; Size (mm):25 mm x 52 mm x 20.6 mm ; Outer Diameter (mm):95; Bore Diameter (mm):55; D:95 mm; d:55 mm; Bearing number:JM207049A/10; |
| 16322001 No Gear Slewing Ring Bearings (46.25*34.25*4.25inch) For Military Turrets | d1:1464 mm; Fatigue load limit - Pu:44 kN; da min.:1348 mm; Size (mm):1720x1320x128; r1,2 min.:7.5 mm; Calculation factor - kr:0.02; D1 ≈:1577.2 mm; Limiting speed:360 r/min; D:1720 mm; Calculation factor - f0:17; |
| 400XRN55 Precision Cross Taper Roller Bearing | Series:M241500; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):119.8; Db - Cup Backface Backing Diameter:272.03 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:18600 lbf; D:292.100 mm; C0 - Static Radial Rating:238000 lbf; Ab - Cage-Cone Frontface Clearance:0.8 mm; e - ISO Factor8:0.33; da - Cone Frontface Backing Diameter:218.95 mm; |
| 02 1225 00 Internal Gear Slewing Bearing(1360*1052*98mm)for Lifting Machinery | Max. shaft corner radius, or 45 deg. chamfer (ch1):2.000; Outer Dia (D):750.0000; Bore Dia (d):530.0000; Bore Diameter (mm):530; Brand:AST; Weight (g):620,000.00; Material:Outer ring made from; Inner Width (Bi):375.0000; Mis-alignment Angle (a deg.):2; Outer Diameter (mm):750; |
| 1157DBS101y Four-point Contact Ball Slewing Bearing With Innter Gear | Size (mm):47.625x101.6x34.925; C0:169; Bearing number:528/522; SLR:25.25; a:22,1 mm; ALP23:0; BET22:10; ra1 max.:3,3 mm; Basic static load rating (C0):169 kN; CONE:0.894; |
| HRE12016 Cross Roller Bearing 120x150x16mm | SDM_:180; DA_:11.906; SRIN:-0.025; D:200 mm; C:20 mm; Brand:NSK; C0:61; da min:166.5; Da max.:193,5 mm; r0 max.:0,6 mm; |
| A10-47E1 External Gear Slewing Rings(54.3*42*4.63inch) For Tunnel Boring Machines | G2 - Heat Generation Factor (Rib-Roller End):26.7; G1 - Heat Generation Factor (Roller-Raceway):125.3; Series:30315M; C - Cup Width:31.000 mm; D:160.000 mm; e - ISO Factor3:0.35; Da - Cup Frontface Backing Diameter:150.10 mm; K - Factor2:1.69; Db - Cup Backface Backing Diameter:145.03 mm; Design Units:METRIC; |
| 02 0720 02 Internal Gear Slewing Bearing(835*578*82mm)for Lifting Machinery | da min.:64 mm; Outside Diameter:3.937 Inch | 100 Mil; Snap Ring:No; Rolling Element:Ball Bearing; Limiting Speed - Grease:5,300 rpm; Category:Angular Contact Ball; Enclosure:Open; Weight / Kilogram:0.636; Da max.:91 mm; |
| RKS.212140106001 Crossed Roller Slewing Bearings(825*567*90mm) With Internal Gear Teeth For Industrial Robot Arm | outer rb:1; hidYobi:HR32008XJ; C:14,5 mm; T:19 mm; inner ra:1; (Oil) Lubrication Speed:7100 r/min; Iso:3CD; Product Group:B04334; ra max.:1 mm; KBRG:3111; |
| VSI250755-N Slewing Ring Bearing(855*610*80mm)for Bending Robot | B:25,4 mm; T:23,812 mm; Size (mm):39.688x79.375x23.812; a:7,4 mm; Basic static load rating (C0):110 kN; Outer Diameter (mm):79,375; Weight:0,55 Kg; Width (mm):23,812; Bearing number:26880/26822; D:79,375 mm; |
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
VU360680 Bearing 565*795*79mm Video