| No. | Brand | b | B | e | f | m | s | Q | X |
| 15mm | - | - | - | - | - | - | - | - | - |
| 45bwd03 | - | - | - | - | - | - | - | - | - |
| 5] | - | - | - | - | - | - | - | - | - |
| 6005.2RSR | fag | - | 10 mm | - | - | - | - | - | - |
| 6004.C3 | fag | - | - | - | - | - | - | - | - |
| 722 | INA | - | - | - | - | - | - | - | - |
| H715310 | SKF | - | 13 mm | - | - | - | - | - | - |
| (Zhv82) | - | - | - | - | - | - | - | - | - |
| (Zhv74) | - | - | - | - | - | - | - | - | - |
| 51108 | - | - | 25,000 mm | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 1211 | SKF | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 1.Manufacturer | - | - | 7 mm | - | - | - | - | - | - |
| 12-18mm | INA | - | 7 mm | - | - | - | - | - | - |
| 6905-2RS | - | - | - | - | - | - | - | - | - |
| (2) | Nachi | - | 78 mm | - | - | - | - | - | - |
| 4x | - | - | - | - | - | - | - | - | - |
| 1 | - | - | 258 mm | - | - | - | - | - | - |
| 6309DDU | - | - | 6 mm | - | - | - | - | - | - |
| HM231149#3 | Timken | - | 23 mm | - | - | - | - | - | - |
| 41.2 | - | - | - | - | - | - | - | - | - |
| 45290 | koyo | - | - | - | - | - | - | - | - |
| 14sb, | John Deere | - | - | - | - | - | - | - | - |
| 501 | INA | - | 35 mm | - | - | - | - | - | - |
| 7312-B-JP | fag | - | - | - | - | - | - | - | - |
| D2 | INA | - | - | - | - | - | - | - | - |
| 2.2mm | - | - | 112 mm | - | - | - | - | - | - |
| 71848 | - | - | - | - | - | - | - | - | - |
| 16347001 External Gear Slewing Ring Bearings (100.667*84*6.5inch) For Wind Turbines | Width (mm):50.6; D:105 mm; B:10 mm; C:9 mm; Basic static load rating (C0):189 kN; r min.:1 mm; r1 min.:1 mm; d3:105 mm; d2:55 mm; da min.:70 mm; |
| CRB50070 Bearing | C2:1 mm; Size (mm):9x13x10; C:10 mm; Basic dynamic load rating (C):0,0035 kN; Brand:IKO; Weight:0,0036 Kg; Bearing number:TLAM 910; Bore Diameter (mm):9; Fw:9 mm; Basic static load rating (C0):0,00404 kN; |
| XR889060 Crossed Roller Bearing | Bore Diameter (mm):70; d1:150 mm; r1 min.:2 mm; H:60 mm; Basic static load rating (C0):500 kN; Basic dynamic load rating (C):236 kN; r2 min.:2 mm; Width (mm):60; D:150 mm; d:70 mm; |
| 50 mm x 110 mm x 27 mm CRB25030 NRXT25030 Cross Roller Bearing Size 250x330x30 Mm CRB 25030 NRXT 25030 | Cage Material:Brass; D:400.000 mm; Cg - Geometry Factor8:0.1105; e - ISO Factor3:0.3; Reference Thermal Speed Rating (Grease):930; Y0 - ISO Factor4:2.28; Bearing Weight:65 Kg; d:240.000 mm; Bore Taper:1/12; Y1 - ISO Factor5:3.4; Size (mm):50 mm x 110 mm x 27 mm ; |
| UH063 Excavator HITACHI Double Row Slewing Bearing 1195*962*85mm | h:75 mm; Bearing number:LMEK40; d:40 mm; L:80 mm; Weight:1,185 Kg; Tolerance perpendicularity (C):20; d1:14 mm; Basic dynamic load rating (C):2150 kN; H:13 mm; D1:98 mm; |
| 10-200741/0-02042 Four-point Contact Ball Slewing Bearing 672mmx816mmx56mm | J:125,55 mm; Bearing number:123077X/123120C; R:2,5 mm; Weight:1,55 Kg; G:12,7 mm; r:0,8 mm; F:7,15 mm; D:120 mm; C:17,45 mm; Brand:Gamet; |
| SX011840 Crossed Roller Bearing | D:130 mm; dc(min):-; C:46 mm; Db(min):-; Bore Diameter (mm):60; r min.:2.1 mm; B2:-; Oil lub.:6200; Db(max):-; Fw:77 mm; |
| 16318001 No Gear Slewing Ring Bearings (11.811*5.512*1.417inch) For Military Turrets | Bearing number:HM88542/HM88510; Width (mm):29,37; Outer Diameter (mm):73,025; D:73,025 mm; Size (mm):31.75x73.025x29.37; Bore Diameter (mm):31.75; Brand:Fersa; d:31.75 mm; |
| A18-60E2 External Gear Slewing Rings(68.8*51.75*5.5inch) For Tunnel Boring Machines | Bore Diameter (mm):95; a -:0,8 mm; Factor (Cg):0,0232; Factor (G2):36,9; R:3 mm; C:27 mm; Factor (G1):127,7; da:104 mm; db:109 mm; Weight:3,05 Kg; |
| CRBC30025UU Crossed Roller Bearing 300X360X25mm | D:95,25 mm; Y2:0.81; Basic static load rating (C0):116 kN; Characteristic rolling element frequency, BSF:5.93 Hz; Max operating temperature, Tmax:120 °C; d:44,45 mm; ra max.:3,5 mm; Nlim (oil):4,900 rpm; (Grease) Lubrication Speed:3 700 r/min; Db:91 mm; |
| 90-321455/0-06065 Four-point Contact Ball Slewing Bearing 1305x1600x90mm | Configuration:Single Row; Groove Width:1.3 mm; Factor fo:16.0; Enclosure:Open; d:75 mm; Da (max):91 mm; Limiting Speed - Grease:6,500 rpm; Radial Clearance:0.025 to 0.051 mm; Weight:0.150 kg; da (min):79 mm; |
| 133.40.1400 Slewing Bearing 1205x1595x220mm | A0:55,1 mm; Brand:FYH; d:49,2125 mm; Weight:2 Kg; L:116 mm; Basic dynamic load rating (C):35,1 kN; H:189 mm; A2:22,5 mm; Basic static load rating (C0):23,3 kN; S:19 mm; |
| RKS.062.20.0544 Slewing Bearing | Size (mm):180x250x33; Bore Diameter (mm):180; Basic dynamic load rating (C):145 kN; D:250 mm; Angle (α):15 °; r min.:2 mm; (Grease) Lubrication Speed:3200 r/min; Basic static load rating (C0):184 kN; Brand:CYSD; C:33 mm; |
| STM2500/45CHH Slewing Bearing For 400T Crawler Crane | Designation Ruville:5234; Designation SKF:VKBA 898; Compatibility:FORD / SIERRA / eng; Designation SX:CX526; Brand:SNR; Designation FAG:713678280; Bearing number:R152.34; |
| 260DBS208y Slewing Bearing | Brand:INA; V:70,002 mm; A:29,007 mm; B:43,688 mm; Bore Diameter (mm):19.05; d3:32,995 mm; Thread (Q) - 1/4-28 UNF:1/428 UNF; Bearing number:RCJ3/4; A1:11,506 mm; J:63,5 mm; |
| Good Performance VA501455N Slewing Bearing 1317x1653.6x110mm | Bearing number:UCPG201; d:12 mm; H:33,3 mm; E:16 mm; L1:21 mm; D1:29 mm; J:49 mm; B1:31 mm; L:70 mm; Basic dynamic load rating (C):12,8 kN; |
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Crossed Roller Slewing Bearings Without Gear Teeth RKS.121405101002 Video