| No. | Brand | b | B | e | f | m | s | Q | X |
| 400 | - | - | 243 mm | - | - | - | - | - | - |
| 750 | NTN | - | - | - | - | - | - | - | - |
| 750 | - | - | - | - | - | - | - | - | - |
| PC200-7 | - | - | - | - | - | - | 6,5 mm | - | - |
| 1220*2440*3mm/5mm/6mm | - | - | - | - | - | - | 35 mm | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| 2013 | NTN | - | - | - | - | - | - | - | - |
| MS08 | - | - | 77 mm | - | - | - | - | - | - |
| 12mm/15mm/18mm | - | - | - | - | - | - | - | - | - |
| 9306KDD | FAFNIR | - | - | - | - | - | - | - | - |
| 1991-1995 | koyo | - | - | - | - | - | - | - | - |
| Hb15g | - | - | 86 mm | - | - | - | - | - | - |
| 4 | - | - | 16 mm | - | - | - | - | - | - |
| 1100 | - | - | - | - | - | - | - | - | - |
| 4mm | - | - | - | - | - | - | - | - | - |
| F693ZZ | - | - | - | - | - | - | - | - | - |
| BM2 | - | - | - | - | - | - | - | - | - |
| S6D108-1F-6 | - | - | 34.1 mm | - | - | - | - | - | - |
| KB050CP0 | fag | - | - | - | - | 6,74 kg / Weight | - | - | - |
| A43 | Danfoss | - | - | - | - | - | - | - | - |
| 6908-ZZ | - | - | 31 mm | - | - | - | - | - | - |
| LM67010 | SKF | - | - | - | - | - | - | - | - |
| DH258-7 Excavator DAEWOO Double Row Sleiwng Bearing 1410*1131*117mm | Da max.:89 mm; ra max.:1,1 mm; Basic static load rating (C0):12,2 kN; D:95 mm; da min.:66 mm; Bore Diameter (mm):60; Weight:0,39 Kg; Width (mm):18; db min:66 mm; r3 min.:0,6 mm; |
| NRXT14025DD Crossed Roller Bearing | D:150 mm; Groove Width A:7 mm; Limiting Speed - Oil:4,500 rpm; Bore Type:Tapered Bore; ra (max):2 mm; Da (max):140 mm; Center Guidance:Floating Steel Ring; d:85 mm; Axial Load Factor Y1:3.01; Static Load Rating:320,000 N; |
| SX011840 Crossed Roller Bearing 200X250X24mm | Bore Diameter (mm):55; Outer Diameter (mm):95; Bearing number:JM207049/JM207010; Size (mm):55x95x29; Width (mm):29; Brand:Fersa; d:55 mm; D:95 mm; |
| MMXC1916 Crossed Roller Bearing | Series:M349500; Db - Cup Backface Backing Diameter:322.07 mm; Bearing Weight:13.80 Kg; R - Cone Backface To Clear Radius1:6.35 mm; C - Cup Width:44.450 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:153000 lbf; db - Cone Backface Backing Diameter:280.92 mm; Cg - Geometry Factor:0.147; Da - Cup Frontface Backing Diameter:333.00 mm; e - ISO Factor8:0.35; |
| I.486.20.00.B Slewing Bearing With Internal Gear 325x486x56mm | Brand:ISO; Size (mm):30x62x32; Outer Diameter (mm):62; Bearing number:7206 BDT; Angle (α):40 °; D:62 mm; B1:32 mm; Width (mm):32; Bore Diameter (mm):30; d:30 mm; |
| Crossed Roller Slewing Bearings With External Gear RKS.121390101002 | r1,2 - min.:1.1 mm; Calculation factor - Y2:1.24; Size (mm):52x20x22.2; d:20 mm; Calculation factor - X:0.63; Bearing number:E2.3304 A-2Z; Calculation factor - Y0:0.66; d2:29.9 mm; Bore Diameter (mm):52; ra - max.:1 mm; |
| 29 mm x 53 mm x 37 mm 9E-1Z30-0461-0119 Crossed Roller Slewing Rings 340/579.8/90mm | Size (mm):29 mm x 53 mm x 37 mm ; C:22 mm; Brand:NBS; Outer Diameter (mm):65; Fw:50 mm; Basic dynamic load rating (C):41,8 kN; Weight:0,157 Kg; Bore Diameter (mm):50; Basic static load rating (C0):66,5 kN; D:65 mm; |
| 9E-1Z16-0310-0111 Crossed Roller Slewing Rings 234/403.5/55mm | r1 min.:1,5 mm; Basic static load rating (C0):780 kN; r4 min.:1,1 mm; Width (mm):90; H:90 mm; r3 min.:1,1 mm; Size (mm):140x225x90; B:163 mm; d:140 mm; D:225 mm; |
| VI 250635N Slewing Bearing 504*722*59mm | Size (mm):85x110x19; r2 min.:1 mm; Bearing number:51117; Basic dynamic load rating (C):45,5 kN; Bore Diameter (mm):85; Weight:0,6 Kg; H:19 mm; d1:110 mm; D1:87 mm; D:110 mm; |
| VSU200644 Slewing Ring Bearing(716*572*56mm)for Packaging Systems | Basic dynamic load rating - C:90.4 kN; C1:13.3 mm; Calculation factor - f1:0.98; Preload class C GC:2240 N; Width (mm):24; Calculation factor - f2A:1; Calculation factor (single, tandem) Y2:0.87; B:24 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; Gref:21.6 cm3; |
| KH-125P No Gear Slewing Ring Bearings (16.5*8.625*2.5inch) For Radar And Satellite Antennas | Width (mm):55; Outer Diameter (mm):260; Brand:CRAFT; C:55 mm; Bore Diameter (mm):120; D:260 mm; Bearing number:NJ324; B:55 mm; Size (mm):120x260x55; d:120 mm; |
| Offer XIU25/764 Cross Roller Bearing 636*866*73mm | L1:78 mm; SWN:7 mm; H1:89 mm; Product Group:M06110; L3:64 mm; Recommended tightening torque for grub screw:6.5 N·m; Bearing:YAR 207-106-2F; GN:1/4-28 SAE-LT; Size (mm):34.925x37x13.5; Fatigue load limit - Pu:0.655 kN; |
| 3R10-82E3C External Gear Heavy Duty Slewing Ring Bearing(94.742*72.25*9.12inch) For Heavy Duty Cranes | Basic static load rating C0:166 kN; ba - max.:65 mm; H2:30 mm; Grease quantity for relubrication:6 g; Product Group:M06110; Diameter - dm:85 mm; Bearing number:SYNT 60 LTS; End cover:ECY 212; N4 max.:8 mm; A3:73 mm; |
| NRXT40040DD Crossed Roller Bearing | ra(max):2.5; C:56 mm; Size (mm):480x600x56; Weight:36,5 Kg; Bore Diameter (mm):480; Bearing No.:6896; C0r:539; da min.:493 mm; Da max.:587 mm; Width (mm):56; |
| L-shape Slewing Bearing Without Gear RKS.23 0741 | Size (mm):27x20x4; Basic dynamic load rating C:0.585 kN; r1,2 min.:0.2 mm; Da - max.:26 mm; D2:25.44 mm; Basic static load rating C0:0.39 kN; Brand:SKF; Outer Diameter (mm):20; da - min.:21.5 mm; Calculation factor kr:0.015; |
| RB4010 XRB4010 Cross Roller Bearing Size 40x65x10 Mm XRB 4010 RB 4010 | Basic static load rating (C0):415 kN; (Grease) Lubrication Speed:900 r/min; Brand:CX; d:90 mm; H:22 mm; Weight:0,64 Kg; Basic dynamic load rating (C):104 kN; D1:120 mm; D:120 mm; Outer Diameter (mm):120; |
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
L Shape Slewing Bearing With Internal Gear RKS.22 0641 Video