No. | Brand | b | B | e | f | m | s | Q | X |
#6212ZZC3/EM-L627 | NTN | - | 37,7 mm | - | - | - | - | - | - |
m2n | Parker | - | - | - | - | - | - | - | - |
400602-00184 | - | - | 45 mm | - | - | 8,79 kg / Weight | - | - | - |
2019 | - | - | - | - | - | - | - | - | - |
3303 | SKF | - | - | - | - | - | - | - | - |
A10vso63/52 | Rexroth | - | - | - | - | - | - | - | - |
2056 | - | - | - | - | - | - | - | - | - |
99.5%Min | - | - | - | - | - | - | - | - | - |
DH500-7 | INA | - | 100 mm | - | - | - | - | - | - |
71904 | INA | - | - | - | - | - | - | - | - |
HSR25LA | IKO | - | 34,1 mm | - | - | - | - | - | - |
1200X1000 | - | - | 24 mm | - | - | - | - | - | - |
300ml | - | - | - | - | - | - | - | - | - |
M5X0.8 | - | - | - | - | - | - | - | - | - |
025 | - | - | - | - | - | - | - | - | - |
10x48 | - | - | - | - | - | - | - | - | - |
7216CD/P4ADBC | - | - | - | - | - | - | - | - | - |
51205 | Rollway | - | - | - | - | - | - | - | - |
FJ1200 | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
(2 | - | - | 27,000 mm | - | - | - | - | - | - |
(BDZ-150) | - | - | - | - | - | - | - | - | - |
16331001 Internal Gear Slewing Ring Bearings (41.97*30.828*3.35inch) For Tunnel Boring Machines | rb max.:2 mm; (Grease) Lubrication Speed:340 r/min; Bore Diameter (mm):400; C0r:3720; Bearing number:46280; da min.:428 mm; ra(max):5; rb(max):2; Calculation factor (e):0,32; Calculation factor (Y0):2,07; |
400XRN55 Precision Cross Taper Roller Bearing | Series:M241500; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):119.8; Db - Cup Backface Backing Diameter:272.03 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:18600 lbf; D:292.100 mm; C0 - Static Radial Rating:238000 lbf; Ab - Cage-Cone Frontface Clearance:0.8 mm; e - ISO Factor8:0.33; da - Cone Frontface Backing Diameter:218.95 mm; |
CRBC25025UU Crossed Roller Bearing | C:118 mm; Brand:ISO; d:600 mm; Width (mm):118; Bore Diameter (mm):600; D:870 mm; B:118 mm; Size (mm):600x870x118; Outer Diameter (mm):870; Bearing number:NUP10/600; |
Slewing Bearing XSI 140544 N 444*614*56mm | Weight:74,6 Kg; d:220 mm; r min.:5 mm; Outer Diameter (mm):460; D:460 mm; Basic static load rating (C0):1570 kN; Bearing number:NU 344; B:88 mm; Brand:NSK; Fw:284 mm; |
9E-1B20-0307-0733 Slewing Bearing With External Gear Teeth 234x403.5x55mm | Weight:0,97 Kg; Width (mm):32; Brand:CX; C:24 mm; Size (mm):50x90x32; D:90 mm; Bearing number:UK210; d:50 mm; Bore Diameter (mm):50; Basic dynamic load rating (C):26,98 kN; |
01 0235 00 Slewing Ring Bearing | Note:This product line wa; Shaft Size:1.75 in; Bearing Type:Split Cylindrical Ex; Dimension H:3.0 in; Support Type:Hanger Block; Seal Type1:High Temperature Pac; Dimension X (Thread):1 - 8 UNC; Bearing Number:LSE112BX; Cr - Dynamic Load Rating:18659 lbf; Cor - Static Load Rating:19558 lbf; |
High Precision XIU15/544 Cross Roller Bearing 444*614*56mm | Width (mm):13; C:13 mm; Basic static load rating (C0):10,35 kN; Fw:15 mm; Bearing number:RNAO 15x23x13; Bore Diameter (mm):15; D:23 mm; Weight:0,0185 Kg; Basic dynamic load rating (C):8,1 kN; E:19 mm; |
9E-1Z50-1790-0232 Crossed Roller Slewing Rings 1615/2027/150mm | Angle:11 °; L3:25 mm; D2:25 mm; l1 min.:22 mm; l2 max.:23,5 mm; L:103 mm; Basic dynamic load rating (C):8,7 kN; D1:20 mm; S2:22 mm; Brand:ISB; |
I.650.20.00.C Slewing Bearing With Internal Gear 445.2x648x56mm | a:23 mm; Cr:47000 N / Dynamic lo; da:92 mm / Tolerance: h; Outer Diameter (mm):120; ra1 max:0,6 mm; m:0,441 kg / Weight; Brand:FAG; rmin:1,1 mm; r1 min:1,1 mm; nG Fett:15000 1/min / Limiti; |
A14-47N5A Internal Gear Slewing Ring Bearing(52*41.28*5.06inch) For Sewage And Water Treatment Equipment | ra1 max.:4 mm; B:95 mm; D:500 mm; S:7,4 mm; r1 min.:5 mm; db min:309 mm; Basic static load rating (C0):2280 kN; ra max.:4 mm; da min.:260 mm; Reference speed:1 010 r/min; |
DH220-5 Excavator DAEWOO Double Row Sleiwng Bearing 1327*1084*112mm | d:69,85 mm; D:120 mm; R:1 mm; Brand:Timken; r:2 mm; Outer Diameter (mm):120; Size (mm):69.85x120x46.751; Width (mm):46,751; Bearing number:482E/472; T:46,751 mm; |
Good Service XA 401765N Slewing Bearing 1622*1971.5*110mm | Outer Diameter (mm):130,000; Size (mm):70.010x130x57.750; Designation SKF:VKHB 2071; Bore Diameter (mm):70,010; Compatibility:KASSBOHRER / MERS.BE; Weight (kg):2.78; Bearing number:CRF-332330 A; Width (mm):57,750; Brand:CRAFT; |
E.900.25.00.B External Gear Slewing Ring Bearing(898*655*80mm) For Loader Cranes | Da max:201 mm; Category:Single Row Ball Bear; Outer Diameter (mm):210; Outside Diameter:8.268 Inch | 210 Mil; rs min:2 mm; Fatigue limit load, Cu:3.05 kN; UNSPSC:31171504; Bearing number:6930; Min operating temperature, Tmin:-20 °C; Characteristic rolling element frequency, BSF:10.21 Hz; |
50 mm x 110 mm x 27 mm CRB25030 NRXT25030 Cross Roller Bearing Size 250x330x30 Mm CRB 25030 NRXT 25030 | Cage Material:Brass; D:400.000 mm; Cg - Geometry Factor8:0.1105; e - ISO Factor3:0.3; Reference Thermal Speed Rating (Grease):930; Y0 - ISO Factor4:2.28; Bearing Weight:65 Kg; d:240.000 mm; Bore Taper:1/12; Y1 - ISO Factor5:3.4; Size (mm):50 mm x 110 mm x 27 mm ; |
A8-17N4D Internal Gear Slewing Ring Bearing(20.48*12.748*2.13inch) For Sewage And Water Treatment Equipment | Dimension P:0.9 in; Bearing - Housing - Seal UPC:013992059413; Support Type:Take-Up; Dimension B:6.0 in; Dimension N:10.5 in; Bearing - Housing - Seal:MSE207BRHATL; Shaft Size:2-7/16 in; Note:This product line wa; Bearing UPC:013992031891; Dimension S:1.6 in; |
1787/710G2 Slewing Bearing 710x924x67mm | d1:360 mm; Basic dynamic load rating (C):4650 kN; d:340 mm; Width (mm):160; Bore Diameter (mm):340; Angle:3 °; Size (mm):340x460x160; Outer Diameter (mm):460; Bearing number:GEC340XS; Brand:FBJ; |
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
L Shape Slewing Bearing With Internal Gear RKS.22 0541 Video