| No. | Brand | b | B | e | f | m | s | Q | X |
| ST50K3 | NTN | - | 50,8 mm | - | - | - | - | - | - |
| 1986-2011 | - | - | - | - | - | - | - | - | - |
| 25pc | - | - | - | - | - | - | - | - | - |
| 4 | - | - | 16,000 mm | - | - | - | - | - | - |
| [Jz-T107] | - | - | - | - | - | 0,017 kg / Weight | - | - | - |
| 30x62x16 | NSK | - | - | - | - | - | - | - | - |
| 1.0TONS | - | - | - | - | - | - | - | - | - |
| 24100N6419F2 | - | - | - | - | - | - | - | - | - |
| 374D | - | - | - | - | - | - | - | - | - |
| 6301-2RS | - | - | 42 mm | - | - | - | - | - | - |
| 320B | - | - | 48 mm | - | - | - | - | - | - |
| 6310VVC3 | NSK | - | 10 mm | - | - | - | - | - | - |
| 15mm | INA | - | - | - | - | - | - | - | - |
| 2016 | - | - | 21,839 mm | - | - | - | - | - | - |
| #NN3006MBKRE44CC1P4, | NSK | - | - | - | - | - | - | - | - |
| k2 | - | - | - | - | - | - | - | - | - |
| MP-02A-22 | DAIKIN | - | - | - | - | - | - | - | - |
| 440 | - | - | - | - | - | - | - | - | - |
| 1530 | John Deere | - | - | - | - | - | - | - | - |
| 3 | - | - | 5 mm | - | - | - | - | - | - |
| XR820061 Crossed Roller Bearing | Brand:KOYO; A0:127 mm; (Refer.)Unit mass(kg):30.2; L:310 mm; Bearing number:UCF321; J:242 mm; Basic static load rating (C0):153 kN; B:112 mm; d:105 mm; A1:32 mm; |
| RKS.921155203001 Crossed Roller Slewing Bearings(403*233*55mm) Without Gear Teeth For Medical Equipment | Ca - min.:4 mm; maximum rpm:6000 RPM; static load capacity:114 kN; Category:Roller Bearings; Manufacturer Name:SKF; Size (mm):110x60x23.75; ra - max.:2 mm; assembly type:Cone & Cup; Da - max.:101 mm; rb - max.:1.5 mm; |
| A12-42E3 External Gear Slewing Rings(48.533*36.75*4inch) For Tunnel Boring Machines | Outer Diameter (mm):6; Ball Dia (Dw):0.8000; Outer Dia (D):6.0000; Radius (min) (rs):0.100; Flange Width (Bf):0.600; Precision:A1; Material:Martensitic Stainles; Max Speed (Grease) (X1000 RPM):71; Ball Qty:8; Brand:AST; |
| Good Performance VI 452280N Slewing Bearing 2072*2413*110mm | Size (mm):30x38x12.8; C:12,8 mm; Width (mm):12,8; Brand:INA; Outer Diameter (mm):38; Bearing number:F-58470; Bore Diameter (mm):30; D:38 mm; d:30 mm; |
| RKS.161.16.1314 Crossed Roller Slewing Bearings(1448*1229*68mm) With External Gear For Industrial Automation | D:440 mm; d:320 mm; Bore Diameter (mm):320; C:118 mm; Basic dynamic load rating (C):1816 kN; Size (mm):320x440x118; Weight:52,18 Kg; Outer Diameter (mm):440; Bearing number:NNU4964 V; B:118 mm; |
| Good Performance XIU25/500Y Cross Roller Bearing 360*602*75m | Width (mm):7; B:7 mm; Bore Diameter (mm):17; Basic dynamic load rating (C):4,3 kN; Size (mm):17x30x7; d:17 mm; Outer Diameter (mm):30; D:30 mm; C:7 mm; Bearing number:6903-Z; |
| RKS.23.0641 L-shape Range No Gear Slewing Bearing(748*534*56mm) For Robot Palletizer | r1 min.:1,5 mm; r min.:1,5 mm; da min.:68 mm; d:60 mm; Width (mm):22; Bearing number:N 212; Ew:97,5 mm; Basic static load rating (C0):75 kN; ra max.:1,5 mm; D:110 mm; |
| VSA200544 Bearing 472*640.3*56mm | Bore Diameter (mm):35,000; Outer Diameter (mm):50,000; Fw:35,000 mm; Bc:39,800 mm; Brand:NTN; Ew:50,000 mm; Bearing number:PK35X50X39.8; |
| MTO-065T No Gear Slewing Ring Bearings (5.315*2.559*0.866inch) For Work Positioners | r1 min.:0,3 mm; Bore Diameter (mm):18; D:35 mm; Weight:0,1 Kg; B:23 mm; dk:31,75 mm; Bearing number:GE 18 SP; Size (mm):18x35x23; Angle:15 °; C:16,5 mm; |
| 01-1595-00 External Gear Slewing Ring Bearing(1727*1500*63mm)for Construction Machinery | Ew:31 mm; Basic static load rating (C0):28 kN; Fw:25 mm; Outer Diameter (mm):31; Bearing number:K 25x31x17; Basic dynamic load rating (C):19 kN; Bc:17 mm; Bore Diameter (mm):25; Brand:NBS; Weight:0,0218 Kg; |
| RKS.060.20.0414 Four Point Contact Slewing Bearings(486*342*56mm) Without Gear For Stacker Crane | R:80 mm; Cua:9000 N / Fatigue li; Ca:102000 N / Dynamic l; D3:110 mm; T2:72,6 mm; ra max:1 mm; ra1 max:0,6 mm; Da max:80 mm; C0a:208000 N / Static lo; Size (mm):45x110x78; |
| VA703765N Four Point Contact Ball Slewing Bearing 3580x4048x154mm | Cor - Static Load Rating:36179 lbf; Support Type:Four-Bolt Plummer Bl; Bearing Number:LSE300BX; Pillow/Plummer Block Style:Split Cylindrical Ho; Housing Width:4.4 in; Bearing Type:Split Cylindrical Ex; Dimension J2 :9-7/8 in; Bearing UPC:013992026156; Shaft Size:3 in; Cr - Dynamic Load Rating:31041 lbf; |
| CRB11020 NRXT11020 Cross Roller Bearing Size 110x160x20 Mm CRB 11020 NRXT 11020 | Brand:ISO; Outer Diameter (mm):85; D:85 mm; Bore Diameter (mm):45; B:19 mm; Size (mm):45x85x19; C:19 mm; Bearing number:N209; d:45 mm; Width (mm):19; |
| VU360980 Bearing 870*1090*79mm | Bearing number:233TVL303; Brand:Timken; E:692,2 mm; H:692,2 mm; D:790,575 mm; T:117,475 mm; Outer Diameter (mm):790,575; Width (mm):117,475; D1:720,72 mm; Size (mm):593.725x790.575x117.; |
| 01 1712 00 Slewing Ring Bearing | C:25 mm; Weight:1,2 Kg; D:100 mm; B1:45 mm; Bore Diameter (mm):55; B2:14 mm; r1 min.:1,5 mm; d:55 mm; Width (mm):25; D1:75 mm; |
| A14-89P1 No Gear Slewing Bearings(94.62*84.5*4.63inch) For Clarifiers And Thickeners | Calculation factor f2C:1.04; Calculation factor fHC:1; Static axial stiffness, preload class A:144 N/µm; Calculation factor f1:0.99; Preload class C - GC:900 N; rb - max.:0.6 mm; Calculation factor - fHC:1; a:35.1 mm; Calculation factor e:0.68; r3,4 min.:0.6 mm; |
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
VSU250855 Bearing 755*955*63mm Video