| No. | Brand | b | B | e | f | m | s | Q | X |
| 5] | - | - | - | - | - | - | - | - | - |
| GWN30 | INA | - | - | - | - | - | - | - | - |
| N21% | - | - | 110 mm | - | - | - | - | - | - |
| A11VLO60 | INA | - | 19 mm | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| 21% | - | - | 15,083 mm | - | - | - | - | - | - |
| 61801.2RS | - | - | 16 mm | - | - | - | - | - | - |
| MKD071B-061-KP1-KN | Rexroth | - | - | - | - | - | - | - | - |
| 3mm | - | - | 15,875 mm | - | - | - | - | - | - |
| 6203 | - | - | - | - | - | - | - | - | - |
| G10 | - | - | - | - | - | - | - | - | - |
| Hm2200 | - | - | 52 mm | - | - | - | - | - | - |
| 3 | INA | - | 36,512 mm | - | - | - | - | - | - |
| 30 | - | - | - | - | - | - | - | - | - |
| 600cm | - | - | - | - | - | - | - | - | - |
| (Zhv22) | - | - | - | - | - | - | - | - | - |
| 12BGR10X | NSK | - | - | - | - | - | - | - | - |
| 4T-LM48548 | NTN | - | - | - | - | - | - | - | - |
| 7202CXP4ADGA | SKF | - | - | - | - | - | - | - | - |
| (Har1005) | - | - | 308 mm | - | - | - | - | - | - |
| 627ZZ | - | - | - | - | - | - | - | - | - |
| NN3009M | - | - | - | - | - | - | - | - | - |
| JXR637050Cross Tapered Roller Bearing | Basic static load rating C0:86.5 kN; Limiting value e:0.2; Bore Diameter (mm):130; Snap Ring:No; D1:114 mm; rb - max.:1 mm; s:3.3 mm; Retainer:Yes; Outside Diameter:5.118 Inch | 130 Mil; Profile:Complete with Outer; |
| CRBS1008 Crossed Roller Bearing 100X116X8mm | Series Type:Medium Series; Cor - Static Load Rating:374981 lbf; Dimension P:1.4 in; Bearing Number:MSM220BX; Seal Type:Viton Single Lip; Bearing - Housing - Seal UPC:013992091567; Bearing Type:Split Cylindrical Ex; Dimension T:28.0 in; Cr - Dynamic Load Rating:255833 lbf; Shaft Size:220 mm; |
| BFKB353240/HA4 Crossed Roller Bearing | Basic dynamic load rating (C):3 200 kN; D:546,1 mm; B:288,925 mm; Bore Diameter (mm):393,7; Brand:NTN; d:393,7 mm; Outer Diameter (mm):546,1; r min.:6,4 mm; Width (mm):288,925; Sa:6,5 mm; |
| MTO-324X No Gear Slewing Ring Bearings (20.486*12.77*2.375inch) For Work Positioners | Shaft Size :100 mm; Float:0.083 in; Dimension B:9.47 in; Oil Lubrication - B/C/O Seal:600 rpm; Oil Lubrication - M/N Seal:900 rpm; Oil Lubrication - T Seal:1700 rpm; Engineering Group:Mounted Bearing; Locking Style:Double V-Lock; Dimension F:16.00 in; Housing Style:Two-Bolt Pillow Bloc; |
| 1235DBS102y Four-point Contact Ball Slewing Bearing With Innter Gear | Width (B):37.0000; Bore Center to End of Rod (h):110.000; Rod End Width (d2):70.000; Brand:AST; Bearing Type - steel-on-bronze:steelonbronze; Rod Overall Length (l2):145.000; Mis-alignment Angle (a deg.):17; Thread Length (l1):66.000; Spherical Diameter (dk or Dk):50.800; Material - Body - Carbon steel-zinc plated, Ball - Hardened chrome steel-chrome plated, Liner:Bronze; |
| 92-201091/1-07272 Slewing Bearing With Internal Gear 984/1198/56mm | Width (mm):120,65; Basic dynamic load rating (C):1560 kN; Bore Diameter (mm):152,4; rb max.:1,1 mm; C:104,78 mm; U:207,16 mm; d:152,4 mm; Weight:17,5 Kg; Angle:5,5 °; D:222,25 mm; |
| SH120A1 Excavator SUMITOMO Three Row Slewing Bearing 1171*973*88mm | Bearing number:HK1814; Width (mm):14; C:14 mm; D:24 mm; Size (mm):18x24x14; Outer Diameter (mm):24; Fw:18 mm; Brand:ISO; Bore Diameter (mm):18; |
| 01-2130-00 External Gear Slewing Ring Bearing(2390*1950*130mm)for Construction Machinery | Outer Diameter (mm):47; Width (mm):30; d:25 mm; B:30 mm; Brand:ISO; Bore Diameter (mm):25; D:47 mm; Size (mm):25x47x30; C:30 mm; Bearing number:NNCF5005 V; |
| SSF1405/50CWH Slewing Bearing For 30-40T Excavator Machine | ra (max):2.5 mm; Inside Ring Outside Diameter:113.5 mm; dc (min):117 mm; ra1 (max):2.5 mm; Bore Type:Cylindrical Bore; Da (max):176 mm; d:90 mm; Dynamic Load Rating:435,000 N; dd (min):127 mm; Fillet Radius/Chamfer:3 mm; |
| DH150-5 Excavator DAEWOO Double Row Sleiwng Bearing 1202*947*83mm | Bearing number:UCT203; Weight:0,7 Kg; B:31 mm; A5:18.3 mm; J2:76 mm; Recommended tightening torque for set screw:5.5 Nm; L3:61 mm; L:94 mm; N:19 mm; H:89 mm; |
| RKS.221310101001 Crossed Roller Slewing Bearings(864*668*82mm) With External Gear Teeth For Textile Machine | Size (mm):3x7x3; C:3 mm; Bearing number:683-2TS; D:7 mm; Bore Diameter (mm):3; Outer Diameter (mm):7; d:3 mm; B:3 mm; Brand:ZEN; Basic dynamic load rating (C):0,311 kN; |
| I.1055.25.00.B Slewing Bearing With Internal Gear 810x1055x80mm | d2:183 mm; Basic static load rating (C0):390 kN; Width (mm):65; Reference speed:2400 r/min; r4 min.:1,5 mm; Fatigue load limit (Pu):10,8; r3 min.:1,5 mm; r2 min.:4 mm; r1 min.:4 mm; ra max.:3 mm; |
| YRTC120 / YRTC 120 Rotary Table Bearing 120x210x40mm | Width (mm):16; Bearing number:K20x28x16; Fw:20 mm; Bore Diameter (mm):20; Weight:0,02 Kg; Ew:28 mm; (Grease) Lubrication Speed:22000 r/min; Size (mm):20x28x16; Brand:CX; Basic static load rating (C0):27 kN; |
| 42 mm x 80 mm x 38 mm 9E-1Z14-0254-0110-1 Crossed Roller Slewing Rings 180/342/42mm | Oil Holes in Retainer:Yes; Steering Pivot Rating:14300 lbf; B:0.9375 in; d - Bore Diameter:1.8220 in; Bearing Type:Thrust Tapered Rolle; D - Bearing O.D.:3.2660 in; R - Fillet Radius Shaft (Max):0.03 in; Weight:1.2 lb; Size (mm):42 mm x 80 mm x 38 mm ; |
| Slewing Bearing ZKLDF120 120*210*40mm | e - ISO Factor4:0.47; Da - Cup Frontface Backing Diameter:18.22 in; K - Factor3:1.24; r - Cup Frontface To Clear Radius2:0.06 in; Y1 - ISO Factor5:1.43; Y2 - ISO Factor6:2.12; G1 - Heat Generation Factor (Roller-Raceway)7:2600; D:18.8125 in; Cg - Geometry Factor8:0.198; Design Units:Imperial; |
| RKS.161.16.1534 Crossed Roller Slewing Bearings(1668*1449*68mm) With External Gear For Industrial Automation | Outer Diameter (mm):480; hidTable:ecat_NSRDGB; B_:46; SRIN:-0.065; Size (mm):380x480x46; C:46 mm; r min.:2,1 mm; SRE:15.61; Z_:24; SREX:0.065; |
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
VSU200844 Bearing 772*916*56mm Video