| No. | Brand | b | B | e | f | m | s | Q | X |
| 220g | - | - | 19,000 mm | - | - | - | - | - | - |
| 4652262 | - | - | 37 mm | - | - | - | - | - | - |
| AP2D-12/14/18/21/25/28/36/38/42 | Rexroth | - | - | - | - | - | - | - | - |
| 5GG77 | - | - | 20 mm | - | - | - | - | - | - |
| R900424742 | Rexroth | - | - | - | - | - | - | - | - |
| pc100-5 | - | - | 70 mm | - | - | - | - | - | - |
| 7/8 | FAFNIR | - | - | - | - | - | - | - | - |
| 17pc | - | - | 20 mm | - | - | - | - | - | - |
| 7215CD/P4ADBA | - | - | - | - | - | - | - | - | - |
| 8944720990 | INA | - | 22 mm | - | - | - | - | - | - |
| 3000 | - | - | - | - | - | - | - | - | - |
| G1203KRR; | FAFNIR | - | 30,391 mm | - | - | - | - | - | - |
| 3D | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | 4,3 kg / Weight | - | - | - |
| EZ30 | SKF | - | 82,55 mm | - | - | - | - | - | - |
| 6309DDU | - | - | 6 mm | - | - | - | - | - | - |
| 500 | - | - | - | - | - | - | - | - | - |
| T6CC | - | - | 58 mm | - | - | - | - | - | - |
| 5.2mm | - | - | 4 mm | - | - | - | - | - | - |
| 9mm/12mm | - | - | - | - | - | - | - | - | - |
| 6310VVC3 | NSK | - | 10 mm | - | - | - | - | - | - |
| 3mm | - | 1.8 mm | - | - | - | - | - | - | - |
| 1220*2440 | - | - | - | - | - | - | - | - | - |
| 37017 | - | - | 4 mm | - | - | - | - | - | - |
| 62303 | NTN | - | - | - | - | - | - | - | - |
| 1795 | - | - | 30,886 mm | - | - | - | - | - | - |
| 21 | - | - | 16 mm | - | - | - | - | - | - |
| Zx240-3 | - | - | - | - | - | - | - | - | - |
| 110 | - | - | - | - | - | - | - | - | - |
| 500D | INA | - | - | - | - | - | - | - | - |
| SD.505.20.00.C Four-point Contact Ball Slewing Bearing 304mmx518mmx56mm | Size (mm):45.618x82.55x23.812; B:25,4 mm; Width (mm):23,812; a:6,4 mm; C:19,05 mm; Outer Diameter (mm):82,55; d:45,618 mm; T:23,812 mm; D:82,55 mm; Bearing number:25590/25519; |
| A14-34E31 External Gear Slewing Rings(38.65*28.25*4.92inch) For Tunnel Boring Machines | C:16 mm; Width (mm):16; Brand:ISO; Bearing number:61916; Size (mm):80x110x16; Bore Diameter (mm):80; Outer Diameter (mm):110; B:16 mm; d:80 mm; D:110 mm; |
| 2628DBD102t Four-point Contact Ball Slewing Bearing With Innter Gear | J:146,34 mm; Size (mm):82.55x140x85; F:7,93 mm; Brand:Gamet; E:28,22 mm; T:85 mm; H:6,35 mm; D:140 mm; da:100 mm; G:14,28 mm; |
| 130.40.1250 Slewing Bearing 1055x1445x220mm | Size (mm):17x30x7; C:7,000 mm; Bearing number:6903LLUNR; B:7,000 mm; Outer Diameter (mm):30,000; Width (mm):7,000; Brand:NTN; d:17,000 mm; Bore Diameter (mm):17,000; D:30,000 mm; |
| MTO-050 No Gear Slewing Ring Bearings (4.331*1.968*0.787inch) For Work Positioners | Bore Diameter (mm):190; da max.:110 mm; Axial load factor Y:0.6; Basic static load rating C0:360 kN; Angle ring:HJ 318 EC; ra max.:2.5 mm; Reference speed:3800 r/min; D1 ≈:161.1 mm; s:2.5 mm; Mass bearing:6.02 kg; |
| SX011860 Crossed Roller Bearing | D:115 mm; fillet radius:1.5 mm; Inventory:0.0; assembly type:Cone & Cup; Minimum Buy Quantity:N/A; closure type:Open; outside diameter:115 mm; dynamic load capacity:106000 N; EAN:4547359002997; Manufacturer Name:NTN; |
| AT21102HB Slewing Bearing With Outer Gear 1055x1350x105mm | Bearing number:120BIH519; D:406,4 mm; Weight:20 Kg; Size (mm):304.8x406.4x50.8; B:50,8 mm; Outer Diameter (mm):406,4; Basic dynamic load rating (C):355 kN; Brand:Timken; Bore Diameter (mm):304,8; Width (mm):50,8; |
| RKS.160.16.1204 Crossed Roller Slewing Bearings(1289*1119*68mm) Without Gear For Industrial Manipulator | Weight:5,4 Kg; Brand:KOYO; Bore Diameter (mm):160; Angle (α):30 °; (Grease) Lubrication Speed:3 400 r/min; C:38 mm; D:240 mm; r min.:2,1 mm; d:160 mm; Size (mm):160x240x38; |
| Good Performance VI 803500N Slewing Bearing 3200*3690*172mm | Bearing number:LM35UU; Basic dynamic load rating (C):4,5 kN; d:35 mm; D:52 mm; Size (mm):35x52x70; Brand:CX; W:2,1 mm; Outer Diameter (mm):52; B1:49,5 mm; Weight:0,45 Kg; |
| A14-89P1 No Gear Slewing Bearings(94.62*84.5*4.63inch) For Clarifiers And Thickeners | Calculation factor f2C:1.04; Calculation factor fHC:1; Static axial stiffness, preload class A:144 N/µm; Calculation factor f1:0.99; Preload class C - GC:900 N; rb - max.:0.6 mm; Calculation factor - fHC:1; a:35.1 mm; Calculation factor e:0.68; r3,4 min.:0.6 mm; |
| 01 0235 00 Slewing Ring Bearing | Note:This product line wa; Shaft Size:1.75 in; Bearing Type:Split Cylindrical Ex; Dimension H:3.0 in; Support Type:Hanger Block; Seal Type1:High Temperature Pac; Dimension X (Thread):1 - 8 UNC; Bearing Number:LSE112BX; Cr - Dynamic Load Rating:18659 lbf; Cor - Static Load Rating:19558 lbf; |
| 1235DBS102y Four-point Contact Ball Slewing Bearing With Innter Gear | Width (B):37.0000; Bore Center to End of Rod (h):110.000; Rod End Width (d2):70.000; Brand:AST; Bearing Type - steel-on-bronze:steelonbronze; Rod Overall Length (l2):145.000; Mis-alignment Angle (a deg.):17; Thread Length (l1):66.000; Spherical Diameter (dk or Dk):50.800; Material - Body - Carbon steel-zinc plated, Ball - Hardened chrome steel-chrome plated, Liner:Bronze; |
| 16380001 Internal Gear Slewing Ring Bearings (108.189*85.433*8.504inch) For Stackers And Reclaimers | G1 - Heat Generation Factor (Roller-Raceway)10:227; Bearing Weight:11.4 lb; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (1 million revolutions)5:77800 lbf; G2 - Heat Generation Factor (Rib-Roller End):38.2; Design Units:Imperial; db - Cone Backface Backing Diameter:4.69 in; Cup Part Number:772-B; e - ISO Factor8:0.39; D:7.1250 in; |
| 3R10-98N1B Internal Gear Heavy Duty Slewing Ring(107*87.165*8.88inch) For Climbing Cranes And Tower Cranes | Width (mm):8; Bearing number:BK071208; Fw:7 mm; Outer Diameter (mm):12; Basic dynamic load rating (C):2,3 kN; Basic static load rating (C0):2,2 kN; Weight:0,0029 Kg; Size (mm):7x12x8; D:12 mm; C:8 mm; |
| R55-5 Excavator HYUNDAI Double Row Slewing Bearing 800*573*70mm | Ew:182 mm; Fw:148 mm; d:130 mm; r1 min.:1.1 mm; Brand:NACHI; Weight:3.77 Kg; Bore Diameter (mm):130; Basic static load rating (C0):217 kN; B:33 mm; Outer Diameter (mm):182; |
| MTO-143T No Gear Slewing Ring Bearings (9.803*5.63*1.339inch) For Work Positioners | Basic static load rating (C0):1,85 kN; da min.:19 mm; D:35 mm; Outer Diameter (mm):35; Bore Diameter (mm):15; Calculation factor (Y1):1.27; d:15 mm; B:14 mm; C:14 mm; Da max.:31 mm; |
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
RB90070 Cross Roller Bearing Size 900x1050x70mm Video