| No. | Brand | b | B | e | f | m | s | Q | X |
| 722 | INA | - | - | - | - | - | - | - | - |
| DH500-7 | INA | - | 100 mm | - | - | - | - | - | - |
| 6mm | - | - | - | - | - | - | - | - | - |
| 4 | - | - | 18 mm | - | - | - | - | - | - |
| 22211 | - | - | 66 mm | - | - | - | - | - | - |
| 1983-2006 | Timken | - | 60 mm | - | - | - | - | - | - |
| 80X100X10 | - | - | 14 mm | - | - | - | - | - | - |
| 684 | - | - | 20 mm | - | - | - | - | - | - |
| 90369-38006 | Nachi | - | - | - | - | - | - | - | - |
| 206-26-00410 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | 918 kg / Weight | - | - | - |
| (2 | Bower | - | 24,074 mm | - | - | - | - | - | - |
| 2K/BMSY/BMS/OMSY/BMS | - | - | 55 mm | - | - | - | - | - | - |
| 13mm | - | - | - | - | - | - | - | - | - |
| 500D | INA | - | - | - | - | - | - | - | - |
| 5*220mm | - | - | 118 mm | - | - | - | - | - | - |
| 2014 | - | - | - | - | - | - | - | - | - |
| SK260 | - | - | 103 mm | - | - | - | - | - | - |
| 4 | - | - | 16,000 mm | - | - | - | - | - | - |
| 404 | - | - | - | - | - | - | - | - | - |
| ZX636 | - | - | - | - | - | - | - | - | - |
| 1220x2440mm | INA | - | - | - | - | - | - | - | - |
| NU2313ECP/C3 | - | - | - | - | - | - | - | - | - |
| ZX10R | NTN | - | 40 mm | - | - | - | - | - | - |
| 131.25.560 Slewing Bearing 426x694x148mm | Y1 - ISO Factor5:2; Cg - Geometry Factor7:0.153; Series:923000; K - Factor3:1.73; D:17.5 in; r - Cup Frontface To Clear Radius2:0.06 in; Y2 - ISO Factor6:2.98; C - Double Cup Width:6.2500 in; e - ISO Factor4:0.34; Design Units:Imperial; |
| RKS.062.20.0844 Four Point Contact Slewing Bearings(916*736*56mm) With Internal Gear For Construction And Industry Machines | C:46 mm; Width (mm):59; r:2,5 mm; R:3 mm; Calculation factor (e):0,36; Bearing number:33030; Dynamic load rating radial (C):530 kN; Size (mm):150x225x59; Brand:Timken; Weight:8 Kg; |
| MTO-265X No Gear Slewing Ring Bearings (17.086*10.433*1.968inch) For Work Positioners | B:128 mm; Center Guidance:Fixed Inner Ring Rib; d:480 mm; Hole Diameter (do):15 mm; Bore Type:Tapered Bore; Enclosure:Open; Weight:126.000 kg; Da (max):628 mm; Nr. of Holes:8; Retainer Material:Machined Brass; |
| EX300-1 Excavator HITACHI Double Row Slewing Bearing 1530*1234*117mm | Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2090 lbf; e - ISO Factor8:0.35; C0 - Static Radial Rating:12100 lbf; K - Factor7:1.67; B:20.638 mm; G1 - Heat Generation Factor (Roller-Raceway):14.6; Cup Part Number:15250X; G2 - Heat Generation Factor (Rib-Roller End):10; Series:15000; B - Cone Width:20.638 mm; |
| VA160302-N Slewing Ring Bearing(384*238*32mm)for Handling Manipulator | Outer Dia (D):120.0000; Bore Dia (d):55.0000; Width (mm):29; Bore Diameter (mm):55; Standard Clearance:C0; Dynamic Load Rating (Cr):134,800; Size (mm):55x120x29; Max. Shaft Shoulder Dia. Inner (Li):70.5; Width (B):29.0000; Material:52100 Chrome steel,; |
| 3R6-63P9 No Gear Heavy Duty Slewing Bearing(68.31*57.28*4.72inch) For Large Industrial Turntables | B:65,000 mm; Width (mm):65,000; Brand:NTN; Bore Diameter (mm):277,000; Size (mm):277x385x65; Outer Diameter (mm):385,000; C:65,000 mm; D:385,000 mm; Bearing number:R5501; d:277,000 mm; |
| CT60 Excavator CATERPILLAR Double Row Sleiwng Bearing 800*590*70mm | Product Group:M06110; Outside Diameter:1.85 Inch | 47 Milli; m:0,14 kg / Weight; DSP:47 mm; S:7,5 mm; Width (mm):28; Category:Insert Bearings; Cr:13400 N / Dynamic lo; C:14 mm; |
| I.800.22.00.A Internal Gear Slewing Rotary Bearing(805*636*82mm) For Filling Machine | Bore Diameter (mm):50,8; a -:8,1 mm; Da:88 mm; r:0,8 mm; T:30,162 mm; Factor (G1):49,9; Factor (Cg):0,0233; Brand:Timken; Basic dynamic load rating (C90):29,3; da:58 mm; |
| 9E-1B17-0235-0182 Slewing Bearing With External Gear Teeth 171x318.6x40mm | Assembly Weight:245.000 lb; Seal Type:Triple Ring Seal; Full Timken Part Number:SAF226264-1/2; Diameter S-1:4 1/2 in; B:22.00 in; Triple Seal 2 Req’d:LOR 118; Bearing Number:22326K; A:6.6875 in; Bolt Hole Length:1.9375 in; D:2.6250 in; |
| 85 mm x 130 mm x 22 mm VLU201094 Flange Without Gear Type Slewing Ring Bearing (1198*984*56mm)for Robot Palletizer | Number of Rows of Balls:Single Row; Mass:0.6 kg; Category:Angular Contact Ball; Bore Diameter (mm):55; Bore:2.165 Inch | 55 Mill; Snap Ring:No; Static load, C0:39.5 kN; Flush Ground:No; Basic static load rating (C0):39,5 kN; Number of Bearings:1 (Single); Size (mm):85 mm x 130 mm x 22 mm ; |
| 1787/710G2K1 Slewing Bearing 710x924x67mm | Width (mm):16; (Grease) Lubrication Speed:11000 r/min; Basic dynamic load rating (C):23,5 kN; Bore Diameter (mm):30; F:38,5 mm; Basic static load rating (C0):21,5 kN; Bearing number:NJ206; D:62 mm; d:30 mm; Size (mm):30x62x16; |
| I.750.20.00.C Slewing Bearing With Internal Gear 547.2x748x56mm | Weight:0,035 Kg; Basic dynamic load rating (C):27,5 kN; Brand:Timken; Outer Diameter (mm):42; (Grease) Lubrication Speed:8100 r/min; Basic static load rating (C0):42,6 kN; Ew:42 mm; Fw:35 mm; Bore Diameter (mm):35; Bc:18 mm; |
| HRA8008 HRA High Precision Crossed Roller Bearing 80X 96 X 8 Mm | Bore Diameter (mm):4,763; Size (mm):4.763x15.875x4.978; C:4,978 mm; Outer Diameter (mm):15,875; D:15,875 mm; Basic static load rating (C0):0,621 kN; (Grease) Lubrication Speed:38000 r/min; d:4,763 mm; B:4,978 mm; Width (mm):4,978; |
| S8-50E1 Single Row Vertical Thrust Slewing Bearings(54.867*46.5*2.88inch) For Stationary And Mobile Cranes | d:35 mm; Width (mm):33; D:66 mm; Outer Diameter (mm):66; B:33 mm; Bearing number:BAHB633676; Brand:SKF; Bore Diameter (mm):35; Size (mm):35x66x33; |
| 4000050-013 Manitex Boom Truck Slewing Ring | Compatibility:AUDI / 80 / engine; Designation Ruville:5426; Designation SX:CX085; Designation SKF:VKBA 575; Designation SNR:R154.26; Brand:FAG; Bearing number:713610160; |
| 2970DBD101t Four-point Contact Ball Slewing Bearing With Innter Gear | C0:0.91; Bearing number:F698DD; db:10; Brand:NSK; SREN:0; rb:0.3; Bore Diameter (mm):8; SRIN:-0.015; SDM_:13; B1:6; |
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
310DBS201y Slewing Bearing Video