No. | Brand | b | B | e | f | m | s | Q | X |
17x35x10 | - | - | - | - | - | - | - | - | - |
10 | - | - | - | - | - | - | - | - | - |
2213 | SKF | - | 20 mm | - | - | - | - | - | - |
3 | - | - | - | - | - | - | - | - | - |
2x | TRW | - | - | - | - | - | - | - | - |
13 | - | - | 33 mm | - | - | 3,58 kg / Weight | - | - | - |
S71914ACB/HCP4A | SKF | - | - | - | - | - | - | - | - |
6E2929 | - | - | 16 mm | - | - | - | - | - | - |
1220*2440mm | - | - | - | - | - | - | - | - | - |
GE14PW | - | - | 20,94 mm | - | - | - | - | - | - |
7783-20-2 | - | - | 20 mm | - | - | - | - | - | - |
610mmx2440mm | - | - | 7,142 mm | - | - | - | - | - | - |
99% | - | - | - | - | - | - | - | - | - |
S3508.2RSR.C3 | fag | - | 14 mm | - | - | - | - | - | - |
200 | - | - | - | - | - | - | - | - | - |
CSK20PP | - | - | - | - | - | - | - | - | - |
4mm | - | - | - | - | - | - | - | - | - |
1/4" | Parker | - | - | - | - | - | - | - | - |
220g-250g | INA | - | 18 mm | - | - | - | - | - | - |
RA28RUBMKT | - | - | - | - | - | - | - | - | - |
7 | - | - | 82 mm | - | - | - | - | - | - |
1 | SKF | - | - | - | - | - | - | - | - |
NNU4934 | - | - | 17 mm | - | - | - | - | - | - |
4005 | - | - | - | - | - | - | - | - | - |
600 | fag | - | - | - | - | - | - | - | - |
1X | - | - | 12,7 mm | - | - | - | - | - | - |
4000810-001 Manitex Boom Truck Slewing Ring | Weight:0,87 Kg; J2:18,3 mm; m:6,5 mm; s:21,4 mm; H1:5,1 mm; Brand:SNR; C0:20.8 kN; D2:63,5 mm; C1:5.1 mm; Basic dynamic load rating (C):31,85 kN; |
R11-79N3 Outer Gear Cross Roller Slewing Ring Bearings(85.47*69.943*3.858inch) For Radar Antennas | Width (mm):97,2; m:6,74 kg / Weight; r1 min:1 mm; C0a:455000 N / Static lo; da max:90 mm; Brand:FAG; d:75 mm; Bore Diameter (mm):75; Bearing number:54318; Size (mm):75x155x97.2; |
SSF1405/50 Ball Type Slewing Bearing | r2 min.:1 mm; (Oil) Lubrication Speed:30 000 r/min; D1:97,5 mm; db min:79,6 mm; Bore Diameter (mm):75; d:75 mm; B:16 mm; Width (mm):16; (Grease) Lubrication Speed:19 000 r/min; r5 min.:0,6 mm; |
310DBS201y Four-point Contact Ball Slewing Bearing With External Gear | Brand:CX; D:32 mm; Outer Diameter (mm):32; Angle (α):25 °; Bearing number:7002 ATBP4; Basic dynamic load rating (C):6 kN; Size (mm):15x32x9; d:15 mm; B1:9 mm; C:9 mm; |
CRB4010 NRXT4010 Cross Roller Bearing Size 40x65x10 Mm CRB 4010 NRXT 4010 | C0 - Static Radial Rating:13200 N; Limiting Speed (Grease):20000 rpm; Da - Outer Ring Backing Diameter:63.400 mm; Full Timken Part Number:2MM9309WICRDUH; Cage Type:CR - Phenolic Outer; Contact Angle:15 º; Bearing Width:12 mm; Limiting Speed (Oil):40000 rpm; r - Outer Ring To Clear Radius3:0.6 mm; Ce - Dynamic Radial Rating1:16800 N; |
JXR699050 Cross Tapered Roller Bearing | Category:Single Row Ball Bear; outside diameter:120 mm; series:63; Weight / Kilogram:0; Snap Ring:No; Precision Class:ABEC 1 | ISO P0; C:29 mm; maximum rpm (grease):5800 rpm; B:29 mm; overall width:29 mm; |
High Precision XIU15/544 Cross Roller Bearing 444*614*56mm | Width (mm):13; C:13 mm; Basic static load rating (C0):10,35 kN; Fw:15 mm; Bearing number:RNAO 15x23x13; Bore Diameter (mm):15; D:23 mm; Weight:0,0185 Kg; Basic dynamic load rating (C):8,1 kN; E:19 mm; |
RKS.060.25.1534 Four Point Contact Slewing Bearings(1619*1449*68mm) Without Gear For Stacker Crane | r1 min.:1 mm; Size (mm):25x62x22.5; Brand:LS; Outer Diameter (mm):62; Bore Diameter (mm):25; C:16,7 mm; B:16,5 mm; T:22,5 mm; D1:34,5 mm; dk:68 mm; |
I.950.20.00.C Internal Gear Flange Slewing Bearing(948*737.6*56mm) For Public Works Machinery | Weight:0,039 Kg; Bearing number:SQ 6 C RS; D1:10 mm; d2:10 mm; S2:11 mm; d:6 mm; l2 max.:11 mm; l3 min.:26 mm; Brand:ISB; D2:13 mm; |
XSA140644 Bearing 574*742.3*56mm | Bore Diameter (mm):710; Outer Diameter (mm):950; Basic dynamic load rating (C):6664 kN; Brand:ISB; K:12 mm; B:243 mm; Weight:495 Kg; d:710 mm; (Grease) Lubrication Speed:382,5 r/min; Width (mm):243; |
1083DBS101y Four-point Contact Ball Slewing Bearing With Innter Gear | Basic static load rating (C0):61,1 kN; Brand:KOYO; Bore Diameter (mm):31.75; Basic dynamic load rating (C):51 kN; r min.:1,6 mm; Da:59 mm; r1 min.:1,6 mm; T:22,225 mm; Calculation factor (e):0,42; Calculation factor (Y0):0,79; |
16339001 External Gear Slewing Ring Bearings (27.362*18.78*3.03inch) For Wind Turbines | Bore Diameter (mm):12; Angle (α):25 °; Basic static load rating (C0):3,75 kN; C:10 mm; r min.:0,6 mm; d:12 mm; Basic dynamic load rating (C):7,65 kN; a:0,2 mm; Width (mm):10; Bearing number:7201AC; |
16315001 External Gear Slewing Ring Bearings (170.079*146.85*6.024inch) For Log Loaders And Feller Bunchers | r1,2 min.:1.1 mm; static load capacity:16 kN; D2:61.88 mm; D2 ≈:61.88 mm; Internal Clearance:C0-Medium; Bore Diameter (mm):72; fillet radius:1 mm; ra max.:1 mm; Snap Ring:No; Width (mm):27; |
1787/710G2K1 Slewing Bearing 710x924x67mm | Width (mm):16; (Grease) Lubrication Speed:11000 r/min; Basic dynamic load rating (C):23,5 kN; Bore Diameter (mm):30; F:38,5 mm; Basic static load rating (C0):21,5 kN; Bearing number:NJ206; D:62 mm; d:30 mm; Size (mm):30x62x16; |
RKS.062.20.0844 Slewing Bearing | Basic dynamic load rating (C):9,2 kN; Width (mm):16; Outer Diameter (mm):19; Bore Diameter (mm):12; r min.:0,3 mm; D:19 mm; Basic static load rating (C0):11,2 kN; Weight:0,0163 Kg; Bearing number:NK12/16; Fw:12 mm; |
E.850.20.00.B External Gear Light Type Slewing Ring Bearing(838.1*672*56mm) For Food Industry Machinery | Angle:7 °; Basic dynamic load rating (C):99 kN; h1:105 mm; d2:94 mm; d:40 mm; l4 max.:155 mm; b:33 mm; l3 min.:56 mm; r min.:0,6 mm; d4:56,5 mm; |
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
308DBS205y Slewing Bearing Video