| No. | Brand | b | B | e | f | m | s | Q | X |
| 716 | - | - | 7 mm | - | - | - | - | - | - |
| cl12 | - | - | - | - | - | - | - | - | - |
| 65.26201-7073c | - | - | 29 mm | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 30202 | NSK | - | - | - | - | - | - | - | - |
| 32mm | - | - | 37 mm | - | - | - | - | - | - |
| 2.5mm | INA | - | 17 mm | - | - | - | - | - | - |
| 227g | INA | - | - | - | - | - | - | - | - |
| 1220*2440mm | - | - | 25.250 mm | - | - | - | - | - | - |
| 2056 | - | - | - | - | - | - | - | - | - |
| Msk100b-0400-nn-m1-ag1-nnnn | Rexroth | - | - | - | - | - | - | - | - |
| 17mm | - | - | - | - | - | - | - | - | - |
| GSX1100 | - | - | - | - | - | - | - | - | - |
| 10x | - | - | - | - | - | - | - | - | - |
| 28mm | - | - | - | - | - | - | - | - | - |
| 915X2150 | - | - | - | - | - | - | - | - | - |
| Hb05r | - | - | - | - | - | - | - | - | - |
| 600 | fag | - | - | - | - | - | - | - | - |
| 750 | NTN | - | - | - | - | - | - | - | - |
| 1525*1525*3mm | - | - | 12 mm | - | - | - | - | - | - |
| 20728258 | - | - | - | - | - | - | - | - | - |
| 22310CD | NSK | - | - | - | - | - | - | - | - |
| 2288 | - | - | - | 0,17 | - | - | - | - | - |
| MU1216UV | - | - | - | - | - | - | - | - | - |
| F126-1 | - | - | - | - | - | - | - | - | - |
| OMP100cc | INA | - | 37,000 mm | - | - | - | - | - | - |
| GRRY20-VA | INA | - | - | - | - | - | - | - | - |
| 16337001 External Gear Slewing Ring Bearings (16*9.19*2.17inch) For Wind Turbines | Radial Clearance:0.410 to 0.550 mm; Da (max):794 mm; Configuration:Double Row; Retainer Material:Machined Brass; Dynamic Load Rating:9,300,000 N; Nr. of Holes:8; Limiting Speed - Grease:420 rpm; Hole Diameter (do):20 mm; Enclosure:Open; d:500 mm; |
| 250XRN35 Precision Cross Taper Roller Bearing | B:31 mm; Bore Diameter (mm):75; D:130 mm; Outer Diameter (mm):130; d:75 mm; Width (mm):31; Brand:ISO; Size (mm):75x130x31; Bearing number:NCF2215 V; C:31 mm; |
| SSF0763/22CWH Excavator Machine Slewing Bearing | m:0,376 kg / Weight; D1:59,2 mm; D:72 mm; Outer Diameter (mm):72; rmin:1,1 mm; B:19 mm; nG:12400 1/min / Limiti; Width (mm):19; Bore Diameter (mm):30; Bearing number:NJ306-E-TVP2; |
| 16347001 External Gear Slewing Ring Bearings (100.667*84*6.5inch) For Wind Turbines | Width (mm):50.6; D:105 mm; B:10 mm; C:9 mm; Basic static load rating (C0):189 kN; r min.:1 mm; r1 min.:1 mm; d3:105 mm; d2:55 mm; da min.:70 mm; |
| 9E-1B20-0641-0571 Four-point Contact Ball Slewing Bearing With External Gear Teeth | R - Inner Ring To Clear Radius4:3.0 mm; Reference Thermal Speed Rating (Grease):810; Da - Outer Ring Backing Diameter:368.000 mm; r - Outer Ring To Clear Radius5:3.0 mm; da - Inner Ring Backing Diameter:252.000 mm; Bearing Weight:78.400 Kg; C0 - Static Radial Rating:3230000 N; d:220 mm; Tapered Bore:N; D:400.000 mm; |
| XSU140814 Bearing 774*914*56mm | C:35 mm; Size (mm):70x150x35; Basic dynamic load rating (C):158 kN; d:70 mm; Outer Diameter (mm):150; Width (mm):35; r:2.1 mm; Weight:3.1 Kg; Brand:NACHI; B:35 mm; |
| MTE-730 External Gear Slewing Ring Bearings (41.85*28.75*3.25inch) For Truck-mounted Cranes | r1 min:4 mm; Width (mm):52; Size (mm):170x310x52; nG Fett:5000 1/min / Limitin; Bearing number:HCB7234-C-T-P4S; a:58 mm; Outer Diameter (mm):310; Brand:FAG; Cr:300000 N / Dynamic l; α:15 ° / Angle; |
| 07 0673 00 Slewing Ring Bearing | Calculation factor f2C:1.05; Bearing number:7007 CB/P4A; Bore Diameter (mm):35; D2:53.38 mm; d1:45.45 mm; r3 min.:0,6 mm; Outer Diameter (mm):62; a:13.6 mm; Basic dynamic load rating C:9.36 kN; |
| MTO-065T No Gear Slewing Ring Bearings (5.315*2.559*0.866inch) For Work Positioners | r1 min.:0,3 mm; Bore Diameter (mm):18; D:35 mm; Weight:0,1 Kg; B:23 mm; dk:31,75 mm; Bearing number:GE 18 SP; Size (mm):18x35x23; Angle:15 °; C:16,5 mm; |
| A6-11E4 External Gear Slewing Rings(14.685*8.27*1.97inch) For Tunnel Boring Machines | Basic dynamic load rating (C):4 750 kN; T2:50 mm; Basic static load rating (C0):24 900 kN; Width (mm):140; Size (mm):670x900x140; r min.:6 mm; da min.:785 mm; Reference speed:375 r/min; Db min.:915 mm; D1:773 mm; |
| SD.855.25.00.B No Gear Slewing Ring Rotary Bearing (855*655*63mm) For Slewing Tower Cranes | Minimum Buy Quantity:N/A; Bearing number:KT 303620; Category:Needle Non Thrust Ro; Long Description:30MM Bore; 36MM Outs; Thrust Bearing:No; Closed End:Not Applicable; Rolling Element:Needle Roller Bearin; Noun:Roller Assembly; Fw:30 mm; |
| STM2450/40 Slewing Bearing For 300T Crawler Crane | D:1400 mm; d2 ≈:1168 mm; Basic dynamic load rating C:11000 kN; Size (mm):1400x1060x250; s1:38.4 mm; Ca min.:6 mm; Bore Diameter (mm):1400; ra max.:6 mm; B:250 mm; |
| A19-150P1 No Gear Slewing Bearings(157.52*141.69*5.04inch) For Clarifiers And Thickeners | r min.:1,5 mm; (Grease) Lubrication Speed:4 300 r/min; Brand:NSK; r1 min.:1,5 mm; Bearing number:NU2215 ET; Width (mm):31; Bore Diameter (mm):75; da min.:83 mm; rb max.:1,5 mm; D:130 mm; |
| VA220596 Bearing 510*712.2*55mm | Db max.:164.4 mm; K:0.5 mm; Preload class B - GB:1210 N; Preload class B:395 N/micron; Ball - z:30; Mass bearing:1.93 kg; da - min.:118.8 mm; Outer Diameter (mm):110; Calculation factor - f:1.1; Limiting speed for grease lubrication:11500 r/min; |
| H7-35N1 Inner Gear Slewing Ring Bearing(38.3*31*3.23inch) For Water Treatment Equipment | B - Cone Width:1.6250 in; Aa - Cage-Cone Backface Clearance:0.15 in; e - ISO Factor8:0.36; Y2 - ISO Factor10:2.78; Cg - Geometry Factor12:0.0814; Y1 - ISO Factor9:1.86; Ab - Cage-Cone Frontface Clearance:0.1 in; Da - Cup Frontface Backing Diameter:4.96 in; db - Cone Backface Backing Diameter:3.66 in; Design Units:Imperial; |
| RKS.22.0741 L-shape Range Internal Gear Slewing Ring Bearing(848*649*56mm) For Bending Robot | C:45 mm; H:25 mm; Thread (N1):M 8; N:6,4 mm; H1:42 mm; Bore Diameter (mm):20; J:45 mm; E:10,8 mm; J1:55 mm; L:60 mm; |
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
CRBS1408 Crossed Roller Bearing Video