| No. | Brand | b | B | e | f | m | s | Q | X |
| 90369-38006 | Nachi | - | - | - | - | - | - | - | - |
| 965 | - | - | - | - | - | - | - | - | - |
| 51108 | - | - | 25,000 mm | - | - | - | - | - | - |
| Nu217 | Nachi | - | - | - | - | - | - | - | - |
| (NH4CL) | - | - | - | - | - | - | - | - | - |
| 1986-2011 | - | - | - | - | - | - | - | - | - |
| 9mm/12mm/15mm/18mm | - | - | 52,4 mm | - | - | - | - | - | - |
| 2 | Nachi | - | - | - | - | - | - | - | - |
| HMV110 | - | - | - | - | - | - | - | - | - |
| 500 | - | - | - | - | - | - | - | - | - |
| 6007ZZJEM | SKF | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| CF20PPA | INA | - | 40 mm | - | - | - | - | - | - |
| [12 | - | - | 25,4 mm | - | - | - | - | - | - |
| 1/4" | Parker | - | - | - | - | - | - | - | - |
| 2648# | - | - | - | - | - | - | - | - | - |
| RG250 | - | - | - | - | - | - | - | - | - |
| 8mm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | 28 mm | - | - | - | - | - | - |
| pc100 | - | - | - | - | - | - | - | - | - |
| 4X8 | - | - | - | - | - | - | - | - | - |
| 1984 | - | - | 58 mm | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 7202CXP4ADGA | SKF | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 6308Z | NSK | - | 24,5 mm | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| NU2334MA/C3 | SKF | - | - | - | - | - | - | - | - |
| 23092 | - | - | 38 mm | - | - | - | - | - | - |
| 1mm | - | - | - | - | - | - | - | - | - |
| VLA200544-N Flange External Gear Type Slewing Ring Bearing(434*640.3*56mm)for Filling Machine | Outer Diameter (mm):68; D:68 mm; C:15 mm; Size (mm):40x68x15; Bore Diameter (mm):40; Bearing number:SE 6008 ZZSTPR; Brand:KOYO; B:15 mm; d:40 mm; Width (mm):15; |
| VLA200844 Bearing | d:65 mm; Fillet Radius/Chamfer:1.5 mm; Bore Type:Cylindrical Bore; da:74 mm; Static Load Rating:71,000 N; D:120 mm; Weight:1.660 kg; ra:1.5 mm; Da:111 mm; B:38.1 mm; |
| CRBH11020AUU Bearing | L1:57 mm; H2:100 mm; L:184 mm; N:17 mm; S:19 mm; Bolt (G):M14; J:137 mm; H1:19 mm; Width (mm):49,2; d:40 mm; |
| MMXC1916 Crossed Roller Bearing | Series:M349500; Db - Cup Backface Backing Diameter:322.07 mm; Bearing Weight:13.80 Kg; R - Cone Backface To Clear Radius1:6.35 mm; C - Cup Width:44.450 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:153000 lbf; db - Cone Backface Backing Diameter:280.92 mm; Cg - Geometry Factor:0.147; Da - Cup Frontface Backing Diameter:333.00 mm; e - ISO Factor8:0.35; |
| RKS.312410101001 Crossed Roller Slewing Bearings(1316*1082*105mm) With Internal Gear Teeth For Industrial Robot Arm | D:420 mm; nB:670 1/min / Referenc; A:38 mm; Da max:406 mm; Ca min:12 mm; Y2:2,54; rb max:3 mm; C0r:4050000 N / Static l; nG:1510 1/min; Size (mm):300x420x152; |
| CRB40035 Cross Roller Bearing Size 400X480X35mm | Product Group:M06110; Bearing number:UCF206; Category:Mounted Units &; A0:40,2 mm; d:30 mm; S:15,9 mm; L:108 mm; Inventory:0.0; A2:18 mm; A:31 mm; |
| 32 0641 01 Light Series Solid Section Internal Gear Slewing Ring Bearing(716*546*56mm)for Packaging Systems | B:81 mm; Bore Diameter (mm):12; R:28 mm; Brand:NKE; d:12 mm; K:7,1 mm; V:48 mm; L:28,6 mm; T:7 mm; M:63,5 mm; |
| SX011840 Crossed Roller Bearing | D:130 mm; dc(min):-; C:46 mm; Db(min):-; Bore Diameter (mm):60; r min.:2.1 mm; B2:-; Oil lub.:6200; Db(max):-; Fw:77 mm; |
| 2787/1525G2 Slewing Bearing 1525x1875x140mm | Center Guidance:Fixed Inner Ring Rib; Static Load Rating:4,750,000 N; Groove Width A:32 mm; Axial Load Factor Y0:1.99; Weight:187.000 kg; d:260 mm; Enclosure:Open; Dynamic Load Rating:4,350,000 N; Bore Type:Tapered Bore; B:165 mm; |
| EX100-1 Excavator HITACHI Double Row Slewing Bearing 1195*962*86mm | Brand:SNR; Width (mm):18,2; D:21 mm; Size (mm):14x21x18.2; Bore Diameter (mm):14; Outer Diameter (mm):21; Bearing number:TNB44261S01; d:14 mm; |
| 03 0217 00 Slewing Ring Bearing | r min.:2,1 mm; C:32 mm; Size (mm):95x170x32; Angle (α):15 °; Bearing number:7219CDF; B:32 mm; d:95 mm; Bore Diameter (mm):95; (Grease) Lubrication Speed:4800 r/min; D:170 mm; |
| 10-200641/0-02032 Four-point Contact Ball Slewing Bearing 572mmx716mmx56mm | A1:100 mm; N:22 mm; Housing Mass:13.1 Kg; H2:35.0 mm; H:194 mm; Locating Rings (width x OD):SR160X6.25; H1:100.0 mm; N1:28 mm; Shaft Diameter da:90 mm; Housing:SNT 218; |
| Good Performance XIU15/450 Cross Roller Bearing 345*531*55mm | Bearing Weight:2.1 lb; Series:435; Da - Cup Frontface Backing Diameter:3.46 in; da - Cone Frontface Backing Diameter:2.01 in; d:1.7500 in; G2 - Heat Generation Factor (Rib-Roller End):11.3; db - Cone Backface Backing Diameter:2.24 in; T - Bearing Width to Flange:0.4376 in; D1 - Flange Outer Diameter:3.9640 in; D:3.7500 in; |
| XSU140414 Bearing 344*484*56mm | D:90 mm; Da max.:84 mm; r min.:1 mm; Basic static load rating (C0):13,2 kN; ra max.:1 mm; Bearing number:65BNR19H; b:0,5 mm; Weight:0,181 Kg; a:19,1 mm; Basic dynamic load rating (C):15,2 kN; |
| 3R6-63P9 No Gear Heavy Duty Slewing Bearing(68.31*57.28*4.72inch) For Large Industrial Turntables | B:65,000 mm; Width (mm):65,000; Brand:NTN; Bore Diameter (mm):277,000; Size (mm):277x385x65; Outer Diameter (mm):385,000; C:65,000 mm; D:385,000 mm; Bearing number:R5501; d:277,000 mm; |
| 40 mm x 80 mm x 23 mm RB9016 XRB9016 Cross Roller Bearing Size 90x130x16 Mm RB 9016 XRB 9016 | Basic dynamic load rating (C):164 kN; Width (mm):33; Weight:3,81 Kg; D:210 mm; Size (mm):40 mm x 80 mm x 23 mm ; Brand:NSK; Bearing number:N1028BMR1KR; Bore Diameter (mm):140; d:140 mm; r1 min.:1,1 mm; |
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
CRBC40040UU Crossed Roller Bearing Video