| No. | Brand | b | B | e | f | m | s | Q | X |
| KH06-PP | INA | - | - | - | - | - | - | - | - |
| 6201-2Z | SKF | - | - | - | - | - | - | - | - |
| 600cm | - | - | - | - | - | - | - | - | - |
| 1765 | - | - | 20 mm | - | - | 0,517 kg / Weight | - | - | - |
| FM3-20FT | Parker | - | - | - | - | - | - | - | - |
| 30 | Thomson | - | - | - | - | - | - | - | - |
| 92-120mm | - | - | 16 mm | - | - | - | - | - | - |
| 16mm | - | - | - | - | - | - | - | - | - |
| p206 | Asahi | - | 594 mm | - | - | - | - | - | - |
| b92.03940 | Rexroth | - | - | - | - | - | - | - | - |
| 2-4mm | - | - | - | - | - | - | - | - | - |
| 19mm | - | - | - | - | - | - | - | - | - |
| 1965-1968 | Timken | - | - | - | - | - | - | - | - |
| 1795 | - | - | 30,886 mm | - | - | - | - | - | - |
| N308W | NSK | - | 108 mm | - | - | - | - | - | - |
| (PIN117) | - | - | 112 mm | - | - | - | - | - | - |
| SK260 | - | - | 103 mm | - | - | - | - | - | - |
| 1200X1000 | - | - | 43 mm | - | - | - | - | - | - |
| G22 | - | 30 mm | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| NU408EM | - | - | - | - | - | - | - | - | - |
| HPV102 | INA | - | - | - | - | - | - | - | - |
| 12mm | - | - | 14 mm | - | - | - | - | - | - |
| MB3/MB4/MB5 | - | - | - | - | - | - | - | - | - |
| stove(XF-8571-A) | - | - | 170 mm | - | - | - | - | - | - |
| 6704 | - | - | - | - | - | - | - | - | - |
| Rhb323 | - | - | - | - | - | - | - | - | - |
| 71904 | INA | - | - | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| 125 | fag | - | 15 mm | - | - | - | - | - | - |
| E.1600.32.00.C Slewing Bearing With Outer Gear 1305x1600x90mm | da:49 mm; ra max.:3,5 mm; Size (mm):38x63x17; D:63 mm; Y0:0.79; DA2:5.435; outer rb:1.3; ALP21:31; B:17 mm; (Grease) Lubrication Speed:5600 r/min; |
| VI160288-N Slewing Ring Bearing(340*216*39mm)for Robotization | Size (mm):165.1x180.975x7.938; d:6 1/2 inch; D:180,975 mm; D1:175,1 mm; Bore Diameter (mm):165,1; Brand:INA; d1:171 mm; Bearing number:CSEB065; C0r:13000 N / Static loa; |
| 1456DBD102y Four-point Contact Ball Slewing Bearing With Innter Gear | r min.:6 mm; Bore Diameter (mm):380; Bearing number:23276BK; C:240 mm; Outer Diameter (mm):680; Calculation factor (Y0):1,85; Basic static load rating (C0):9 650 kN; Calculation factor (Y1):1,89; d:380 mm; Size (mm):380x680x240; |
| CRBC5013 Bearing 50x80x13mm | d:40 mm; Basic dynamic load rating (C):31,85 kN; J:148 mm; Thread (G):M6x1; Bearing number:UKFL209H; e:22 mm; Weight:2 Kg; D2:65 mm; Bore Diameter (mm):40; L:108 mm; |
| S22-140E1 Single Row Vertical Thrust Slewing Bearings(149.733*132.75*5.75inch) For Stationary And Mobile Cranes | Bearing number:50WR5640; Ew:56 mm; (Grease) Lubrication Speed:5500 r/min; Bore Diameter (mm):50; Basic dynamic load rating (C):51 kN; Fw:50 mm; Width (mm):40; Weight:0,11 Kg; Size (mm):50x56x40; B:40 mm; |
| 07 2810 09 Slewing Ring Bearing | Size (mm):44.45x85x20.63; G:7,93 mm; C1:4,76 mm; Weight:0,47 Kg; B:24,5 mm; T:20,63 mm; da:55 mm; C:17,46 mm; J:89,76 mm; Width (mm):20,63; |
| RB20030 XRB20030 Cross Roller Bearing Size 200x280x30 Mm RB 20030 XRB 20030 | r:1,5 mm; R:6,4 mm; T:158,75 mm; Outer Diameter (mm):381; Size (mm):269.875x381x158.75; Bearing number:M252349/M252310CD+M2; d:269,875 mm; C:123,825 mm; Width (mm):158,75; D:381 mm; |
| VLI200744 Bearing | Outer Diameter (mm):75; Angle:4 °; d:50 mm; h1:120 mm; Bearing number:GIHNRK 50 LO; dk:66 mm; l4 max.:174 mm; Size (mm):50x75x50; D:75 mm; d5:96 r/min; |
| I.486.20.00.B Slewing Bearing With Internal Gear 325x486x56mm | Brand:ISO; Size (mm):30x62x32; Outer Diameter (mm):62; Bearing number:7206 BDT; Angle (α):40 °; D:62 mm; B1:32 mm; Width (mm):32; Bore Diameter (mm):30; d:30 mm; |
| CRBH9016AUUC1 Precision Cross Roller Bearing | Outer Diameter (mm):100; Bore:2.756 Inch | 70 Mill; Radial Clearance:0.010 to 0.030 mm; Outer Race Width:0.63 Inch | 16 Milli; d:70 mm; Width (mm):16; Category:Single Row Ball Bear; Weight / LBS:0.72; Rolling Element:Ball Bearing; |
| L6-22P9ZD No Gear Slewing Rings(25.51*17.09*2.2inch) For Reclaimers | Cover Length C1:0.995 in; Cover Diameter A:3.345 in; Type:Open; Number of Bolts:4; |
| MMXC1080 Crossed Roller Bearing | Size (mm):18x40x12; Width (mm):12; Bore Diameter (mm):18; d:18 mm; Bearing number:6203-2RS d18 C3; Brand:PFI; Outer Diameter (mm):40; B:12 mm; D:40 mm; |
| ZR180A Rotary Drilling Rig Slewing Ring Bearing | Standard Clearance:C0; Width (B):20.6380; Outer Diameter (mm):52; Max Speed (Oil) (X1000 RPM):11; Outer Dia (D):52.0000; Max. Shaft Shoulder Dia. Inner (Ui):31.0; Weight (g):160.00; Min. Housing Shoulder Dia., Outer (Uo):47.000; Static Load Rating (Cor):14,600; Precision:A1; |
| NRXT2508DD Crossed Roller Bearing 25X41X8mm | r - Cup Backface To Clear Radius2:0.050 in; Cup Part Number:383X; C - Cup Width:0.8750 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5010 lbf; Ab - Cage-Cone Frontface Clearance:0.11 in; Y2 - ISO Factor10:2.84; Db - Cup Backface Backing Diameter:3.50 in; Cage Type:Stamped Steel; R - Cone Frontface To Clear Radius1:0.030 in; Design Units:Imperial; |
| Large Stocks XA 282304N Slewing Bearing 2190*2493.4*110mm | ℓ:60,3 Tolerance h14; Basic dynamic load rating (C):65,5 kN; Basic static load rating (C0):56 kN; Brand:NSK; C:34 mm; Bore Diameter (mm):40; B:36 mm; Width (mm):36; r2 min.:2,6 mm; b:18 mm; |
| 124.32.1600 Slewing Bearing 1460x1740x91mm | Width (mm):36,512; Bore Diameter (mm):73,817; D:127 mm; Outer Diameter (mm):127; d:73,817 mm; Bearing number:568/563; Brand:Fersa; Size (mm):73.817x127x36.512; |
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
CRBC30025UU Crossed Roller Bearing 300X360X25mm Video