No. | Brand | b | B | e | f | m | s | Q | X |
1150*730mm | - | 16.7 mm | - | - | - | - | - | - | - |
9400 | John Deere | - | - | - | - | - | - | - | - |
NUTR45100 | INA | - | - | - | - | - | - | - | - |
18mm | - | 33 mm | - | - | - | - | - | - | - |
1216KC3 | - | - | - | - | - | - | - | - | - |
46% | - | - | - | - | - | - | - | - | - |
57414/300811 | - | - | - | - | - | - | - | - | - |
MMF025/035 | - | - | - | - | - | - | - | - | - |
18 | INA | - | - | - | - | - | - | - | - |
12-0-3 | - | - | - | - | - | - | - | - | - |
22324 | - | - | 16 mm | - | - | - | - | - | - |
1/2 | - | - | 17 mm | - | - | - | - | - | - |
PC300-3 | - | - | - | - | - | - | - | - | - |
80 | - | - | 41 mm | - | - | - | - | - | - |
PV24 | - | - | - | - | - | - | - | - | - |
SZLH400F | - | - | 276,225 mm | - | - | - | - | - | - |
Z2S | Rexroth | - | - | - | - | - | - | - | - |
Ga4 | - | - | 65 mm | - | - | - | - | - | - |
4 | - | - | 18 mm | - | - | - | - | - | - |
600cm | - | - | - | - | - | - | - | - | - |
1220*2440 | - | - | - | - | - | - | - | - | - |
2.8D | - | - | - | - | - | - | - | - | - |
S6D108-1F-6 | - | - | 34.1 mm | - | - | - | - | - | - |
606Z | - | - | 88 mm | - | - | - | - | - | - |
600 | fag | - | - | - | - | - | - | - | - |
PC450-8 | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
684 | - | - | 20 mm | - | - | - | - | - | - |
08 0400 00 Slewing Ring Bearing | D:107,95 mm; d:55,562 mm; Width (mm):29,317; R:2,3 mm; Brand:Timken; B:29,317 mm; C:22,225 mm; Bore Diameter (mm):55,562; Size (mm):55.562x107.95x29.317; Outer Diameter (mm):107,95; |
9E-1Z25-0575-1044 Crossed Roller Slewing Bearing With External Gear 470/708/83mm | B:33 mm; rmin:2 mm; nG Fett:6000 1/min / Limitin; Bearing number:HCB71938-E-T-P4S; nG Ol:1/min / Limiting spe; a:69 mm; m:3,58 kg / Weight; C0r:101000 N / Static lo; Width (mm):33; α:25 ° / Angle; |
VLA200544 Bearing | Bearing number:7238 A; Width (mm):55; (Grease) Lubrication Speed:2000 r/min; D:340 mm; Brand:CX; Basic dynamic load rating (C):303 kN; a:104 mm; Outer Diameter (mm):340; Angle (α):25 °; Basic static load rating (C0):390 kN; |
10-250855/0-03010 Four-point Contact Ball Slewing Bearing 755mmx955mmx63mm | Bearing - Housing - Seal:LSE511BRH; Cor - Static Load Rating:149273 lbf; Dimension V:0.1 in; Bolt Size:4 x M24; Series Type:Light Series; Bearing UPC:013992027344; Support Type:Round Flange; Note:This product line wa; Maximum Speed:1450 rpm; Dimension T:18.5 in; |
16383001 Internal Gear Slewing Ring Bearings (155.512*131.339*9.055inch) For Stackers And Reclaimers | Brand:ZEN; C:1 mm; Width (mm):1; Size (mm):1x3x1; d:1 mm; (Grease) Lubrication Speed:130000 r/min; Outer Diameter (mm):3; Bearing number:681; Bore Diameter (mm):1; Basic dynamic load rating (C):0,096 kN; |
BFKB353243/HA4 Crossed Roller Bearing | C:50 mm; Bore Diameter (mm):220; Da max.:262 mm; Width (mm):50; B:50 mm; Basic dynamic load rating (C):238 kN; r2 min.:1,5 mm; ra max.:1,5 mm; Fatigue load limit (Pu):81,5; Outer Diameter (mm):270; |
RKS.312410102001 Crossed Roller Slewing Bearings(1316*1082*105mm) With Internal Gear Teeth For Industrial Robot Arm | Static Load Rating:104,000 N; ra (max):2 mm; Groove Diameter:183.6 mm; Width:36 mm; (Grease) Lubrication Speed:3200 r/min; Width (mm):36; D1:183.64 mm; Fillet Radius/Chamfer:2.1 mm; Basic dynamic load rating (C):133 kN; Dx (min):205 mm; |
CRBC30035UU Crossed Roller Bearing | Bearing number:71914 C; B:16 mm; Brand:ISO; C:16 mm; Bore Diameter (mm):70; d:70 mm; Width (mm):16; Angle (α):15 °; a:19,4 mm; D:100 mm; |
06-1250-21 External Gear Slewing Ring Bearing(1476*1084*110mm)for Construction Machinery | Bearing number:7326 CDB; a:112,9 mm; Outer Diameter (mm):280; d:130 mm; Angle (α):15 °; D:280 mm; Brand:ISO; Size (mm):130x280x116; Bore Diameter (mm):130; Width (mm):116; |
Super Precision XA 341455N Slewing Bearing 1317*1653.6*95mm | d:16 mm; Brand:LS; Bearing number:SABP16N; B:21 mm; Bore Diameter (mm):16; |
Good Service XA 501790N Slewing Bearing 1621*2027.5*130mm | Outer Race Width:0.157 Inch | 4 Milli; Inch - Metric:Metric; Noun:Bearing; Calculation factor f0:7.7; Inner Race Width:0 Inch | 0 Millimete; Internal Clearance:C0-Medium; Basic static load rating - C0:0.335 kN; Enclosure:Open; Weight / LBS:0.0077; |
High Quality XA 140640N Slewing Bearing 571*742.3*50mm | Basic dynamic load rating (C):11,4 kN; Brand:NSK; Weight:0,03 Kg; Outer Diameter (mm):22; Fw:14 mm; Bore Diameter (mm):14; Width (mm):20; Basic static load rating (C0):15,2 kN; Size (mm):14x22x20; C:20 mm; |
RKS.060.25.1534 Four Point Contact Slewing Bearings(1619*1449*68mm) Without Gear For Stacker Crane | r1 min.:1 mm; Size (mm):25x62x22.5; Brand:LS; Outer Diameter (mm):62; Bore Diameter (mm):25; C:16,7 mm; B:16,5 mm; T:22,5 mm; D1:34,5 mm; dk:68 mm; |
CRBC7013UU Crossed Roller Bearing | Bearing number:CRO-5215; Outer Diameter (mm):400; d:260 mm; D:400 mm; Brand:NTN; Bore Diameter (mm):260; T:255 mm; Size (mm):260x400x255; Width (mm):255; |
1792/1400G2 Slewing Bearing 1400x1780x110mm | rmin:0,3 mm; Bore Diameter (mm):10; Outer Diameter (mm):26; B:8 mm; a:8 mm; nG Fett:85000 1/min / Limiti; nG Ol:130000 1/min / Limit; Size (mm):10x26x8; ra max:0,3 mm; d:10 mm; |
124.32.1250 Slewing Bearing 1110x1390x91mm | Calculation factor (Y2):2,03; Bore Diameter (mm):304,8; Width (mm):336,55; Bearing number:47TS615034; Basic static load rating (C0):8570 kN; d:304,8 mm; r min.:4 mm; Calculation factor (e):0,33; Outer Diameter (mm):501,65; Weight:257 Kg; |
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
CRBC15030UU Crossed Roller Bearing Video