| No. | Brand | b | B | e | f | m | s | Q | X |
| 90% | - | - | - | - | - | - | - | - | - |
| (MH-1) | - | - | - | - | - | - | - | - | - |
| 6mm | - | - | 75 mm | - | - | - | - | - | - |
| 2490mm | - | - | - | - | - | - | - | - | - |
| 4TNV94 | - | - | - | - | - | - | - | - | - |
| K7V63 | - | - | 40 mm | - | - | - | - | - | - |
| ER12K-HFF | Rexnord | - | - | - | - | - | - | - | - |
| (M-NF25F14001) | - | - | - | - | - | - | - | - | - |
| 6226ZZSC3 | NSK | - | 436 mm | - | - | - | - | - | - |
| 300 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | 16 mm | - | - | - | - | - | - |
| 6017-2Z | SKF | - | - | - | - | - | - | - | - |
| 6.38mm | INA | - | 50 mm | - | - | - | - | - | - |
| KH06-PP | INA | - | - | - | - | - | - | - | - |
| 24122-E1-C4 | - | - | - | - | - | - | - | - | - |
| NU409-M1-C3 | fag | - | 7,938 mm | - | - | - | - | - | - |
| A4VG40 | Rexroth | - | - | - | - | - | - | - | - |
| 36939 | - | - | - | - | - | - | - | - | - |
| E345C | - | - | 28 mm | - | - | - | - | - | - |
| 2W8001Excavator | - | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| 99.5%Min | - | - | 37 mm | - | - | - | - | - | - |
| 6209 | fag | - | - | - | - | - | - | - | - |
| Dw5-2-10 | - | - | 56,363 mm | 0.3 | - | - | - | - | - |
| 1.5-3mm | - | - | - | - | - | - | - | - | - |
| 24 | - | - | - | - | - | - | - | - | - |
| Photos4X8 | - | - | 31 mm | - | - | - | - | - | - |
| 33 0741 01 Light Series Solid Section No Gear Slewing Ring Bearing(816*672*56mm)for Stacker Crane | Tensioning Unit Type:Push Type; Support Type:Take-Up; Dimension S:3.4 in; Dimension P:1.0 in; Cor - Static Load Rating:157366 lbf; Dimension B:10.5 in; Bearing UPC:013992039347; Shaft Size:4.75 in; Dimension N:18.3 in; Dimension Y:0.9 in; |
| I.400.22.00.A-T Internal Gear Slewing Ring Bearing(395*232*82mm) For Excavator And Crane | radial dynamic load capacity:60.5 kN; maximum rpm:9000 RPM; ra - max.:2 mm; Inch - Metric:Metric; Db max.:89.4 mm; internal clearance:C0; r3,4 - min.:1.5 mm; Calculation factor kr:0.1; Noun:Bearing; precision rating:ABEC 3 (ISO Cla; |
| 40 mm x 90 mm x 23 mm 92-321155/1-06235 Slewing Bearing With Internal Gear 1012/1300/90mm | Calculation factor Y1:0.55; Basic static load rating C0:224 kN; D:240 mm; Outside Diameter:9.449 Inch | 240 Mil; r1,2 min.:3 mm; UNSPSC:31171531; Flush Ground:No; Db - max.:233 mm; Calculation factor e:1.14; Mass bearing:10 kg; Size (mm):40 mm x 90 mm x 23 mm ; |
| 16347001 External Gear Slewing Ring Bearings (100.667*84*6.5inch) For Wind Turbines | Width (mm):50.6; D:105 mm; B:10 mm; C:9 mm; Basic static load rating (C0):189 kN; r min.:1 mm; r1 min.:1 mm; d3:105 mm; d2:55 mm; da min.:70 mm; |
| 9E-1Z20-0730-1198 Crossed Roller Slewing Bearing With External Gear 634/846/75mm | Factor (Cg):0,0474; overall width:0.6250 in; Size (mm):107.95x165.1x36.512; cone width:1.4375 in; Basic dynamic load rating (Ca90):46,3; Weight:2,62 Kg; T:36,512 mm; D:165,1 mm; Basic dynamic load rating (C90):54,4; C:26,988 mm; |
| CRBC40040UU Crossed Roller Bearing | Dynamic Load Rating:675,000 N; Center Guidance:Floating Steel Ring; Hole Diameter (do):5 mm; Bore Type:Tapered Bore; Limiting Speed - Oil:3,500 rpm; Nr. of Holes:6; Axial Load Factor Y2:3.49; Limiting Speed - Grease:2,600 rpm; da (min):130 mm; Configuration:Double Row; |
| EX90 Excavator HITACHI Double Row Slewing Bearing 993*764*78mm | A2:64 mm; N2:98 mm; L1:183 mm; N:53 mm; L2:30 mm; L5:302 mm; A:102 mm; H2:152 mm; H:240 mm; d:75 mm; |
| 90-321355/0-06055 Four-point Contact Ball Slewing Bearing 1205x1500x90mm | C:55 mm; (Grease) Lubrication Speed:1800 r/min; Bore Diameter (mm):190; Weight:22,8 Kg; Basic static load rating (C0):280 kN; Outer Diameter (mm):340; Basic dynamic load rating (C):255 kN; Size (mm):190x340x55; Width (mm):55; Bearing number:6238; |
| SX011824 Crossed Roller Bearing 120X150X16mm | d:50 mm; Angle (α):15 °; Bore Diameter (mm):50; Size (mm):50x90x20; D:90 mm; C:20 mm; Bearing number:7210CG1UJ74; Width (mm):20; Brand:SNR; Outer Diameter (mm):90; |
| XSU140414 Cross Roller Slewing Ring Bearing For Industrial Robotics | Da - Cup Frontface Backing Diameter:6.61 in; C - Cup Width:0.5625 in; Series:LL327000; e - ISO Factor2:0.35; D:6.8125 in; Cup Part Number:LL327010; Design Units:Imperial; Cg - Geometry Factor:0.138; Db - Cup Backface Backing Diameter:6.46 in; r - Cup Backface To Clear Radius1:0.06 in; |
| RB20030 XRB20030 Cross Roller Bearing Size 200x280x30 Mm RB 20030 XRB 20030 | r:1,5 mm; R:6,4 mm; T:158,75 mm; Outer Diameter (mm):381; Size (mm):269.875x381x158.75; Bearing number:M252349/M252310CD+M2; d:269,875 mm; C:123,825 mm; Width (mm):158,75; D:381 mm; |
| CRBC10020UU Crossed Roller Bearing | Bore Diameter (mm):140; D1:202 mm; C2:5 mm; Bearing number:JP14049-JP14010-B; Basic dynamic load rating (C):304 kN; Outer Diameter (mm):202; T1:13 mm; Brand:Timken; C:21 mm; D:195 mm; |
| 0685XRN091 Precision Cross Taper Roller Bearing | G2 - Heat Generation Factor (Rib-Roller End):8.8; db - Cone Backface Backing Diameter:34.04 mm; r - Cup Backface To Clear Radius2:0.76 mm; Bearing Weight:0.9 Kg; D:76.2 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:5520 lbf; Db - Cup Backface Backing Diameter:65.02 mm; C - Cup Width:23.813 mm; Ab - Cage-Cone Frontface Clearance:1.5 mm; C0 - Static Radial Rating:22800 lbf; |
| RKS.22.0641 L-shape Range Internal Gear Slewing Ring Bearing(748*546*56mm) For Bending Robot | Dynamic Load Rating:8130 lbf; Foot Height H1:19.1 mm; Total Height H2:101.6 mm; Center of Bearing from End S:19 mm; Bearing Type:Ball Bearing; Bolt Hole Width N:14.3 mm; Seal Type:Shroud Seal; Dimension L1:59.8 mm; Dimension B1:1.937 in; Series:Industrial; |
| Crossed Roller Slewing Bearings Without Gear Teeth RKS.223475101001 | (Grease) Lubrication Speed:2600 r/min; B:60 mm; Brand:CYSD; d:150 mm; Dynamic load rating radial (C):622 kN; Bore Diameter (mm):150; C:60 mm; Size (mm):150x210x60; Outer Diameter (mm):210; D:210 mm; |
| YRT260-C / YRT260C Rotary Table Bearing 260x385x55mm | Brand:Gamet; B:77 mm; Bore Diameter (mm):228,6; Da:325 mm; da:270 mm; d:228,6 mm; r:3 mm; D:355,6 mm; R:7 mm; Outer Diameter (mm):355,6; |
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
SX011860 Crossed Roller Bearing Video