| RB70045 Cross Roller Bearing Size 700x815x45mm | Bearing number:7219 CDT; Width (mm):64; Angle (α):15 °; Brand:ISO; D:170 mm; Size (mm):95x170x64; d:95 mm; Bore Diameter (mm):95; Outer Diameter (mm):170; B1:64 mm; |
| 2910DBD101t Four-point Contact Ball Slewing Bearing With Innter Gear | SI:0; SLR:35.5; r:1; C0:197; Bearing number:RNA6912; Fw:68 mm; Size (mm):68x85x45; Width (mm):45; hidYobi:RNA6912; (Grease) Lubrication Speed:3800 r/min; |
| 0901XRN112 Precision Cross Taper Roller Bearing | N:9,6 mm; Recommended diameter for attachment bolts, inch G:0.3125 in; H2:3 mm; Basic static load rating (C0):6,55 kN; Weight:0,27 Kg; Recommended tightening torque for grub screw:4 N·m; Thread grub screw G2:M6x0.75; Bearing:YEL 204-2F; G:8 mm; Bore Diameter (mm):20; |
| RKS.062.20.1094 Slewing Bearing | d1:37 mm; Bore Diameter (mm):35; Brand:CX; Basic static load rating (C0):37,5 kN; (Grease) Lubrication Speed:4300 r/min; D1:52 mm; Weight:0,08 Kg; T:12 mm; d:35 mm; Bearing number:51107; |
| 22 0411 01 Light Series Internal Gear Slewing Ring Bearing(518*325*56mm)for Robot Palletizer | Harmonized Tariff Code:8482.10.50.68; Precision Class:ABEC 1 | ISO P0; Size (mm):55x30x13; Bore:1.181 Inch | 30 Mill; Category:Single Row Ball Bear; da min.:35 mm; ra max.:1 mm; r1,2 min.:1 mm; Minimum Buy Quantity:N/A; Calculation factor kr:0.03; |
| 10-200741/0-02042 Four-point Contact Ball Slewing Bearing 672mmx816mmx56mm | J:125,55 mm; Bearing number:123077X/123120C; R:2,5 mm; Weight:1,55 Kg; G:12,7 mm; r:0,8 mm; F:7,15 mm; D:120 mm; C:17,45 mm; Brand:Gamet; |
| Supply VSA200944N Four Point Contact Ball Slewing Bearing 872x1046x56mm | Bearing Number:LSE112BR; Cr - Dynamic Load Rating:18659 lbf; Dimension N:5.375 in; Bolt Size:4 x M12; Dimension L:4.1 in; Cor - Static Load Rating:19558 lbf; Series Type:Light Series; Maximum Speed:4630 rpm; Bearing Type:Split Cylindrical Re; Note:This product line wa; |
| SD.855.25.00.B No Gear Slewing Ring Rotary Bearing (855*655*63mm) For Slewing Tower Cranes | Minimum Buy Quantity:N/A; Bearing number:KT 303620; Category:Needle Non Thrust Ro; Long Description:30MM Bore; 36MM Outs; Thrust Bearing:No; Closed End:Not Applicable; Rolling Element:Needle Roller Bearin; Noun:Roller Assembly; Fw:30 mm; |
| I.1300.32.00.C Slewing Bearing With Internal Gear 1012x1300x90mm | dk:13 mm; Bore Diameter (mm):8; r min.:0,3 mm; l2 max.:54 mm; W:M8x1,25; B:8 mm; Bearing number:SA 8 E; d2:24 mm; Width (mm):8; C1:6 mm; |
| 9E-1Z36-1870-1291 Crossed Roller Slewing Bearing With External Gear 1720/2074/123mm | Bore Diameter (mm):200; D:340 mm; Width (mm):112; C:112 mm; Bearing number:NN3140C1NAP4; B:112 mm; Brand:NTN; Outer Diameter (mm):340; d:200 mm; Size (mm):200x340x112; |
| RKS.160.16.1424 Crossed Roller Slewing Bearings(1509*1339*68mm) Without Gear For Industrial Manipulator | Bearing number:52312; d1:50 mm; Width (mm):64; Bore Diameter (mm):62; d:62 mm; Outer Diameter (mm):110; Size (mm):62x110x64; Brand:ISO; T:64 mm; D:110 mm; |
| 9E-1Z16-0310-0111-1 Crossed Roller Slewing Rings 234/403.5/55mm | Snap Ring Diameter D2 max:96.500 mm; Cr - Dynamic Load Rating:47.3 kN; Radius Rs min:1.500 mm; Grease Reference Speed:9300 rpm; Weight:0.74 Kg; Features:Snap Ring; Outside Ring Width B:23.000 mm; Oil Reference Speed:13000 rpm; Clearance:C3; Outside Diameter D:90.000 mm; |
| 01-0880-00 External Gear Slewing Ring Bearing(1022*770*82mm)for Construction Machinery | F:3,17 mm; C1:4,76 mm; R:2 mm; da:55 mm; B:24,5 mm; T:20,63 mm; Outer Diameter (mm):85; J:89,76 mm; G:7,93 mm; d:44,45 mm; |
| Low Price XIU15/575 Cross Roller Bearing 462*657*45mm | Dimension F:14.96 in; Shaft Size :90 mm; C0 - Static Load:87200 lb; Eng Internal Radial Clearance - Min:0.0024; Grease Lubrication - T Seal:2000 rpm; Weight:56 lb; Float:0.083 in; Full Timken Part Number:QMSN18J090SB; Oil Lubrication - M/N Seal:1400 rpm; Pre Install Clearance Min:0.0024 in; |
| 10-251055/0-03030 Four-point Contact Ball Slewing Bearing 955mmx1155mmx63mm | Width (mm):155,2; Weight:3,1 Kg; D:75 mm; Bore Diameter (mm):50; B:155,2 mm; Bearing number:LME50LUU; d:50 mm; Outer Diameter (mm):75; Brand:Samick; W:2,65 mm; |
| SD.486.20.00.B Four-point Contact Ball Slewing Bearing 342mmx486mmx56mm | J:5,13 mm; S:12,7 mm; Outer Diameter (mm):47; M:3,43 mm; D:47 mm; Thread (G):M5X0,8; F:27,56 mm; d:19.05 mm; Bore Diameter (mm):19.05; S1:18,26 mm; |