| No. | Brand | b | B | e | f | m | s | Q | X |
| 4T-LM48548 | NTN | - | - | - | - | - | - | - | - |
| 460B | - | - | - | - | - | 1,08 kg / Weight | - | - | - |
| 1311EKTN9 | SKF | - | - | - | - | - | - | - | - |
| 6808 | - | - | - | - | - | - | - | - | - |
| XVZ1300 | - | - | - | - | - | - | - | - | - |
| 1 | - | - | 258 mm | - | - | - | - | - | - |
| 1600 | NTN | - | - | - | - | - | - | - | - |
| mdd090c-n-040-n2l-110ga0 | Rexroth | - | 24,5 mm | - | - | - | - | - | - |
| 1985-1987 | koyo | - | - | - | - | - | - | - | - |
| 311B | INA | - | - | - | - | - | - | - | - |
| ZX200 | - | - | - | - | - | - | - | - | - |
| 7 | - | - | 167 mm | - | - | - | - | - | - |
| 2003 | NSK | - | 100 mm | - | - | - | - | - | - |
| ISO4706 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| (MH-1) | - | - | - | - | - | - | - | - | - |
| A8V107dm/A8V125dm/A8V160dm | - | - | - | - | - | - | - | - | - |
| 21309 | SKF | - | - | - | - | - | - | - | - |
| 0088Z | - | - | - | - | - | - | - | - | - |
| 4 | Thomson | - | - | - | - | - | - | - | - |
| N317 | NTN | - | 9 mm | - | - | - | - | - | - |
| 1200X1200mm | - | - | 44,45 mm | - | - | - | - | - | - |
| NU213 | NSK | - | - | - | - | - | - | - | - |
| (DG4-050) | - | - | - | - | - | - | - | - | - |
| MSA-06-X-30 | YUKEN | - | 63,000 mm | - | - | - | - | - | - |
| 1974-1978 | - | - | - | - | - | - | - | - | - |
| 3R8-68N3B Internal Gear Heavy Duty Slewing Ring(74.5*58.796*5.62inch) For Climbing Cranes And Tower Cranes | Bearing number:QJ 304; Bore Diameter (mm):20; Width (mm):15; Outer Diameter (mm):52; d:20 mm; D:52 mm; C:15 mm; B:15 mm; Brand:SIGMA; Size (mm):20x52x15; |
| ZX750 Excavator HITACHI Double Row Slewing Bearing 1930*1495*159mm | d:1 mm; Bearing number:619/1-2RS; B:2,3 mm; Size (mm):1x4x2.3; Brand:ISO; Outer Diameter (mm):4; D:4 mm; Width (mm):2,3; C:2,3 mm; Bore Diameter (mm):1; |
| I.955.25.00.B Internal Gear Slewing Bearing(955*710*80mm) For Concrete Pump And Fire Ladder | F:92,2 mm; Outer Diameter (mm):150; Basic dynamic load rating (C):104 kN; C:37 mm; Bearing number:GNE70-KRRB; L:75,4 mm; S:6 mm; Size (mm):70x150x58; D:150 mm; Weight:4,37 Kg; |
| R8-39E3 Outer Gear Cross Roller Slewing Bearings(43.867*34.57*2.874inch) For Lift Truck Rotators | Angle:15 °; Outer Diameter (mm):42; Bore Diameter (mm):22; Width (mm):28; Thread (G):M22X1,5; C1:20 mm; l7 min.:29 mm; Basic dynamic load rating (C):68 kN; dk:38,1 mm; D:42 mm; |
| 9E-1Z30-0980-16 Crossed Roller Slewing Rings 868/1144/100mm | Dimension B2:0.531 in; Dimension S1:26.9 mm; Set Screw Size:1/4-20; Dimension M:0.142 in; Center of Bearing from End S:17.5 mm; Weight:0.50 lb; Sub Series:G1…KPPB2,3,4; Outside Diameter D:2.047 in; Material:Bearing Steel; Number of Set Screws:2; |
| MTO-324X No Gear Slewing Ring Bearings (20.486*12.77*2.375inch) For Work Positioners | Shaft Size :100 mm; Float:0.083 in; Dimension B:9.47 in; Oil Lubrication - B/C/O Seal:600 rpm; Oil Lubrication - M/N Seal:900 rpm; Oil Lubrication - T Seal:1700 rpm; Engineering Group:Mounted Bearing; Locking Style:Double V-Lock; Dimension F:16.00 in; Housing Style:Two-Bolt Pillow Bloc; |
| 5 mm x 8 mm x 2 mm BFKB353282/HA4 Crossed Roller Bearing | Size (mm):5 mm x 8 mm x 2 mm ; Bearing number:NU 1076 MA; s:10.8 mm; operating temperature range:Maximum of +300; Category:Cylindrical Roller B; Noun:Bearing; Separable:Inner Ring - Both Si; Calculation factor kr:0.15; Rolling Element:Cylindrical Roller B; Fatigue load limit Pu:170 kN; |
| R9-67N3 Outer Gear Cross Roller Slewing Ring Bearings(72.2*59.086*3.15inch) For Radar Antennas | Dynamic Load Rating:213,000 N; Hole Diameter (do):3 mm; d:65 mm; ra (max):1.5 mm; D:120 mm; Roller Profile:Asymmetric; Axial Load Factor Y0:2.21; Limiting Speed - Grease:5,700 rpm; Center Guidance:Fixed Inner Ring Rib; Axial Load Factor Y1:2.26; |
| STN1120/32 Slewing Bearing For EBZ200 Boring Machine | r2 min.:3,5 mm; Weight:0,71 Kg; r1 min.:3,5 mm; Outer Diameter (mm):74; Bearing number:ZA-40BWD12FCA88**; D:74 mm; b:21 mm; d:40 mm; Width (mm):42; |
| 131.32.800 Slewing Bearing 636x964x182mm | Brand:KOYO; d:340 mm; C:165 mm; (Oil) Lubrication Speed:590 r/min; ra max.:5 mm; Calculation factor (Y1):2,43; r min.:6 mm; D:620 mm; Calculation factor (Y0):2,37; Basic static load rating (C0):5430 kN; |
| E.750.20.00.C Slewing Bearing With Outer Gear 534x742.8x56mm | C:37 mm; D:64 mm; B:37 mm; Outer Diameter (mm):64; Size (mm):34x64x37; d:34 mm; Width (mm):37; Bore Diameter (mm):34; Bearing number:PW34640037CS; Brand:PFI; |
| 9E-1Z30-0823-1250 Crossed Roller Slewing Bearing With External Gear 715/979/00mm | B:105 mm; Brand:CX; Weight:111 Kg; d1:380 mm; H:116 mm; R:540 mm; Angle:4 °; D2:405 mm; Size (mm):320x520x116; Bore Diameter (mm):320; |
| SD.1200.32.00.C Four-point Contact Ball Slewing Bearing 905mmx1200mmx90mm | Ca90 - Dynamic Thrust Rating (90 million revolutions)6:75400 lbf; R - Cone Frontface To Clear Radius1:0.130 in; Aa - Cage-Cone Backface Clearance:0 in; Ab - Cage-Cone Frontface Clearance:0.27 in; K - Factor7:1.76; e - ISO Factor8:0.33; Cone Part Number:HM265049DGW; B - Double Cone Width:7.3125 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:132000 lbf; Cup Part Number:HM265010; |
| HD820-1 Excavator KATO Three Row Slewing Bearing 1320*1080*95mm | Basic static load rating (C0):123 kN; Brand:NSK; r min.:2,1 mm; Bearing number:BL 219; da max:114 mm; da min.:106 mm; Weight:2,95 Kg; Width (mm):32; C:32 mm; Size (mm):95x170x32; |
| 9E-1B30-0533-0947 Slewing Bearing With External Gear 431.8x657.9x87.4mm | Outer Diameter (mm):815; Size (mm):570x815x594; C:594 mm; Width (mm):594; Bore Diameter (mm):570; Bearing number:FCDP 114163594; Weight:1010 Kg; d:570 mm; B:594 mm; Basic dynamic load rating (C):13000 kN; |
| 30 mm x 72 mm x 27 mm MTO-170 No Gear Slewing Ring Bearings (12.205*6.693*1.811inch) For Work Positioners | r min.:0,3 mm; Width (mm):25; Weight:0,115 Kg; d:20 mm; D:37 mm; Da max.:35 mm; Size (mm):30 mm x 72 mm x 27 mm ; C:23 mm; Bearing number:NATB 5904; Static load rating axial (C0):6,11 kN; |
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Wholesale XA 160596N Slewing Bearing 510*712.3*55mm Video