| No. | Brand | b | B | e | f | m | s | Q | X |
| 40210AX000 | - | - | 750 mm | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 20Y-26-22330 | - | - | - | - | - | - | - | - | - |
| 4) | - | - | - | - | - | - | - | - | - |
| 2W-250-25 | - | - | 51,6 mm | - | - | - | - | - | - |
| 12-12-17 | - | - | - | - | - | - | - | - | - |
| 2.8D | - | - | - | - | - | - | - | - | - |
| 96%Min | - | - | 35 mm | - | - | - | - | - | - |
| 220g | INA | - | - | - | - | - | - | - | - |
| 2003 | NSK | - | 100 mm | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| D8r | INA | - | 11 mm | - | - | - | - | - | - |
| TD06H-Garrett | - | - | 12 mm | - | - | - | - | - | - |
| NU311ECM/C3 | - | - | - | - | - | - | - | - | - |
| ATC200X | - | - | 80 mm | - | - | - | - | - | - |
| 708-2G-00700 | - | - | - | - | - | - | - | - | - |
| [10 | - | - | 87.315 mm | - | - | - | - | - | - |
| 7/8 | FAFNIR | - | - | - | - | - | - | - | - |
| 5.0-7.0t/H | - | - | - | - | - | - | - | - | - |
| 6210-Z | - | - | - | - | - | - | - | - | - |
| 7000 | - | - | - | - | - | - | - | - | - |
| 6 | - | - | 16,764 mm | - | - | - | - | - | - |
| 7008CB/HCP4AL | SKF | - | - | - | - | - | - | - | - |
| 3-layer | - | - | - | - | - | - | - | - | - |
| 71911CDGB/P4A | - | - | - | - | - | - | - | - | - |
| CBN3 | - | - | - | - | - | - | - | - | - |
| 600cm | - | - | - | - | - | - | - | - | - |
| R6 | FAFNIR | - | - | - | - | - | - | - | - |
| 312B | - | - | 5 mm | - | - | - | - | - | - |
| PC450-8 | - | - | - | - | - | - | - | - | - |
| 10-251055/0-03030 Four-point Contact Ball Slewing Bearing 955mmx1155mmx63mm | Width (mm):155,2; Weight:3,1 Kg; D:75 mm; Bore Diameter (mm):50; B:155,2 mm; Bearing number:LME50LUU; d:50 mm; Outer Diameter (mm):75; Brand:Samick; W:2,65 mm; |
| Supply XIU15/644 Cross Roller Bearing 546*714*56mm | Outer Diameter (mm):26; Width (mm):12; Bore Diameter (mm):10; Basic static load rating (C0):185 kN; d:10 mm; D:26 mm; Size (mm):10x26x12; C:12 mm; Bearing number:63000-2RS; B:12 mm; |
| 5 mm x 8 mm x 2 mm BFKB353282/HA4 Crossed Roller Bearing | Size (mm):5 mm x 8 mm x 2 mm ; Bearing number:NU 1076 MA; s:10.8 mm; operating temperature range:Maximum of +300; Category:Cylindrical Roller B; Noun:Bearing; Separable:Inner Ring - Both Si; Calculation factor kr:0.15; Rolling Element:Cylindrical Roller B; Fatigue load limit Pu:170 kN; |
| Offer XIU25/764 Cross Roller Bearing 636*866*73mm | L1:78 mm; SWN:7 mm; H1:89 mm; Product Group:M06110; L3:64 mm; Recommended tightening torque for grub screw:6.5 N·m; Bearing:YAR 207-106-2F; GN:1/4-28 SAE-LT; Size (mm):34.925x37x13.5; Fatigue load limit - Pu:0.655 kN; |
| VLA200544 Bearing | Bearing number:7238 A; Width (mm):55; (Grease) Lubrication Speed:2000 r/min; D:340 mm; Brand:CX; Basic dynamic load rating (C):303 kN; a:104 mm; Outer Diameter (mm):340; Angle (α):25 °; Basic static load rating (C0):390 kN; |
| 10-200311/0-02003 Four-point Contact Ball Slewing Bearing 242/386/56mm | Brand:ISO; B:40 mm; Bearing number:4310; C:40 mm; Width (mm):40; Size (mm):50x110x40; Bore Diameter (mm):50; D:110 mm; d:50 mm; Outer Diameter (mm):110; |
| 03 0402 00 Slewing Ring Bearing | Width (mm):32; r1 min.:0,6 mm; l8:5 mm; l6 max.:128 mm; Basic dynamic load rating (C):127 kN; C1:27 mm; dk:60 mm; h2:77 mm; d:45 mm; Outer Diameter (mm):68; |
| 06-0400-00 External Gear Slewing Ring Bearing(535*305*75mm)for Construction Machinery | C:16 mm; Basic static load rating (C0):15,2 kN; Basic dynamic load rating (C):20,9 kN; r min.:1 mm; Bore Diameter (mm):45; d:45 mm; Size (mm):45x75x16; B:16 mm; Outer Diameter (mm):75; Brand:NSK; |
| RK6-22P1Z No Gear Slewing Ring Bearings (25.51*17.09*2.205inch) For Industrial Positioners | Bearing number:6203NZ; Bore Diameter (mm):17,000; C:12,000 mm; Outer Diameter (mm):40,000; d:17,000 mm; B:12,000 mm; Size (mm):17x40x12; Brand:SNR; Width (mm):12,000; D:40,000 mm; |
| RKS.160.14.0644 Crossed Roller Slewing Bearings(714*574*56mm) Without Gear For Industrial Manipulator | Basic static load rating (C0):162 kN; d:60 mm; T:33,5 mm; Size (mm):60x130x33.5; Width (mm):33,5; C:22 mm; Brand:ISB; Bearing number:31312; Basic dynamic load rating (C):142 kN; D:130 mm; |
| A8-22P11 No Gear Slewing Bearings(26*18*2.75inch) For Clarifiers And Thickeners | a:38,2 mm; Width (mm):23; d:65 mm; Angle (α):25 °; Bore Diameter (mm):65; C:23 mm; B:23 mm; Outer Diameter (mm):120; Brand:ISO; Bearing number:7213 A; |
| 225DBS209y Four-point Contact Ball Slewing Bearing With External Gear | B:15,083 mm; Bore Diameter (mm):88,9; C:11,112 mm; T:15,083 mm; Weight:0,452 Kg; Brand:FBJ; Basic static load rating (C0):88 kN; Outer Diameter (mm):121,442; Bearing number:LL217849/LL217810; (Grease) Lubrication Speed:2700 r/min; |
| 12-200411/1-02213 Slewing Bearing With Internal Gear 325/486/56mm | Bearing number:7013B; ra max.:1 mm; Outer Diameter (mm):100; d:65 mm; (Grease) Lubrication Speed:5400 r/min; r1 min.:0.6 mm; D:100 mm; C:18 mm; B:18 mm; Bore Diameter (mm):65; |
| RE11020UUC0 High Precision Cross Roller Ring Bearing | H1:30 mm; H2:14 mm; Da:19 mm; Bearing number:LTDR 12-2LS; A:28 mm; Thread (N1):M5; J:69 mm; H3:11 mm; H:15 mm; Fw:12 mm; |
| YRTC120-XL / YRTC120XL Rotary Table Bearing 120x210x40mm | Cr:8200 lbf / Dynamic l; m:0,168 lbs / Weight; Outer Diameter (mm):41,275; Bore Diameter (mm):31,75; Minimum Buy Quantity:N/A; Width (mm):28,575; C:28,575 mm; Rolling Element:Needle Roller Bearin; |
| VSI200544-N Slewing Ring Bearing(616*444*56mm)for Manipulator | Size (mm):40x61.74x38; Basic dynamic load rating (C):113 kN; D1:57,2 mm; Weight:0,56 Kg; B:38 mm; Outer Diameter (mm):61,74; Bearing number:SL185008; Width (mm):38; d1:50,5 mm; Brand:NBS; |
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
130.32.1120 Slewing Bearing 950x1284x182mm Video