| No. | Brand | b | B | e | f | m | s | Q | X |
| SS2062370 | Parker | - | - | - | - | - | - | - | - |
| FM3-20FT | Parker | - | - | - | - | - | - | - | - |
| NUP309E | - | - | 80 mm | - | - | - | - | - | - |
| 500 | - | - | 55 mm | - | - | - | - | - | - |
| 684 | - | - | 20 mm | - | - | - | - | - | - |
| 2X | - | - | - | - | - | - | - | - | - |
| 2-25mm | - | - | - | - | - | - | - | - | - |
| 2x | - | - | - | - | - | - | - | - | - |
| 1300 | koyo | - | 8 mm | - | - | - | - | - | - |
| 19mm | - | - | - | - | - | - | - | - | - |
| 9mm/12mm/18mm | - | - | - | - | - | - | - | - | - |
| 45# | - | - | - | - | - | - | - | - | - |
| 7316b | - | - | 16,000 mm | - | - | - | - | - | - |
| (4x) | - | - | - | - | - | - | - | - | - |
| CAT245 | - | - | - | - | - | - | - | - | - |
| 220g-250g | INA | - | 18 mm | - | - | - | - | - | - |
| 16mm | - | - | 29,317 mm | - | - | - | - | - | - |
| 2 | - | - | - | - | - | 4,3 kg / Weight | - | - | - |
| 1795 | - | - | 30,886 mm | - | - | - | - | - | - |
| 2017 | - | - | 28 mm | - | - | - | - | - | - |
| 28678 | Timken | - | - | - | - | - | - | - | - |
| 2288 | - | - | - | 0,17 | - | - | - | - | - |
| 21%N | - | - | 7,92 mm | - | - | - | - | - | - |
| A3w | - | - | - | - | - | - | - | - | - |
| 17mm | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| Cheaper Price XIU30/1120Y Cross Roller Bearing 936*1242*82mm | B1:49,2 mm; s:19 mm; Weight:1,6 Kg; Basic dynamic load rating (C):29,6 kN; Thread (G):R1/8"; H:172 mm; Brand:SNR; J:143,5 mm; A:36 mm; Bearing number:UCFLZ208; |
| VI 401304N Slewing Bearing 1140*1416*92mm | Size (mm):14x18x10; Bore Diameter (mm):14; Width (mm):10; Bearing number:K14x18x10; B:10 mm; Ew:18 mm; Brand:ISO; Outer Diameter (mm):18; Fw:14 mm; |
| 300DBS202y Slewing Bearing | C:22,225 mm; Outer Diameter (mm):95,25; T:30,958 mm; Bore Diameter (mm):44,45; Size (mm):44.45x95.25x30.958; B:28,575 mm; D:95,25 mm; Brand:ISO; d:44,45 mm; a:0,5 mm; |
| VI 200897N Slewing Bearing 776*976*60mm | Bearing number:HK4516; Size (mm):45x52x16; Shaft (Fw):45.000; Width (mm):16; Brand:AST; Material - Drawn cup: Hardened carbon steel alloy, Rollers:52100 Chrome steel o; Bore Diameter (mm):45; Outer Diameter (mm):52; Static Load Rating (Cor):43,000; Dynamic Load Rating (Cr):21,300; |
| Low Price XA 341117N Slewing Bearing 995*1293.6*100mm | D:52 mm; Brand:SIGMA; T:19 mm; B:18 mm; Outer Diameter (mm):52; d:20 mm; Size (mm):20x52x19; C:15 mm; Bore Diameter (mm):20; Bearing number:87604; |
| Good Performance XIU15/450 Cross Roller Bearing 345*531*55mm | Bearing Weight:2.1 lb; Series:435; Da - Cup Frontface Backing Diameter:3.46 in; da - Cone Frontface Backing Diameter:2.01 in; d:1.7500 in; G2 - Heat Generation Factor (Rib-Roller End):11.3; db - Cone Backface Backing Diameter:2.24 in; T - Bearing Width to Flange:0.4376 in; D1 - Flange Outer Diameter:3.9640 in; D:3.7500 in; |
| 1083DBS101y Four-point Contact Ball Slewing Bearing With Innter Gear | Basic static load rating (C0):61,1 kN; Brand:KOYO; Bore Diameter (mm):31.75; Basic dynamic load rating (C):51 kN; r min.:1,6 mm; Da:59 mm; r1 min.:1,6 mm; T:22,225 mm; Calculation factor (e):0,42; Calculation factor (Y0):0,79; |
| I.1166.20.00.B Internal Gear Flange Slewing Bearing(1166*984*56mm) For Excavator And Loader | d1:265 mm; Bore Diameter (mm):220; Basic dynamic load rating (C):5700 kN; Outer Diameter (mm):370; a:75 mm; Width (mm):97; d:220 mm; C:67 mm; D:370 mm; B:82 mm; |
| CRBS1008 Crossed Roller Bearing | Da - max.:124 mm; Preload class C GC:1110 N; Calculation factor f2A:1; Preload class B GB:560 N; Preload class A - GA:185 N; a:25.5 mm; Fatigue load limit - Pu:1.2 kN; Db - max.:125.8 mm; rb max.:0.6 mm; r3,4 min.:0.6 mm; |
| L Shape Slewing Bearing With Internal Gear RKS.22 0741 | d1:52.2 mm; Reference speed:7500 r/min; Outer Diameter (mm):38; Fatigue load limit - Pu:5.4 kN; Da - max.:56.5 mm; Size (mm):63x38x17; Width (mm):17; a:14 mm; EAN:7316570641950; Basic static load rating - C0:52 kN; |
| R70-7 Excavator HYUNDAI Double Row Slewing Bearing 900*665*85mm | Calculation factor (Y1):2,22; Oil lub.:400; Y1:2.22; ra max.:6 mm; Width (mm):240; (Refer.)Mass(kg):420; Calculation factor (e):0,3; Bore Diameter (mm):460; Brand:KOYO; Grease lub.:300; |
| 16325001 No Gear Slewing Ring Bearings (95*82*4inch) For Military Turrets | Cage Type:Stamped Steel; Cg - Geometry Factor:0.0781; K - Factor8:1.6; C1 - Dynamic Radial Rating (1 million revolutions)6:23500 lbf; Aa - Cage-Cone Backface Clearance:0.04 in; a - Effective Center Location4:-0.34 in; Cone Part Number:3490; R - Cone Backface To Clear Radius3:0.14 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:41000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:3820 lbf; |
| XRB800100 Cross Roller Bearing Size 800x1030x100mm | Outer Diameter (mm):280; B:93 mm; d:130 mm; C:93 mm; (Grease) Lubrication Speed:3200 r/min; Weight:30,5 Kg; Basic static load rating (C0):465 kN; Bore Diameter (mm):130; Basic dynamic load rating (C):416 kN; Brand:ISB; |
| CRBC4010UU Crossed Roller Bearing | Bearing number:GE 280 HCR-2RS; Size (mm):280x430x210; d:280 mm; Angle:15 °; Brand:ISO; Bore Diameter (mm):280; B:210 mm; R:375 mm; D:430 mm; Width (mm):210; |
| 0.787 Inch | 20 Millimeter x 2.047 Inch | 52 Millimeter x 0.591 Inch | 15 Millimeter 134.32.900 Slewing Bearing 736x1064x182mm | Basic static load rating - C0:11000 kN; Brand:SKF; da - min.:233 mm; Specific static load factor K0:500 N/mm²; rb - max.:1 mm; r1 min.:1.1 mm; Specific factor static load - K0:500 N/mm2; B:135 mm; da - max.:239.5 mm; α:8 °; Size (mm):0.787 Inch | 20 Millimeter x 2.047 Inch | 52 Millimeter x 0.591 Inch | 15 Millimeter ; |
| XR855053 Crossed Roller Bearing | d:595,312 mm; Width (mm):615,95; T:615,95 mm; Brand:NTN; Bore Diameter (mm):595,312; Size (mm):595.312x844.55x615.9; Bearing number:CRO-11913; D:844,55 mm; Outer Diameter (mm):844,55; |
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
130.50.4500 Slewing Bearing 4218x4782x270mm Video