| 9E-1B16-0451-1212 Slewing Bearing With External Gear 380x530x48mm | Bearing Type:sealed; Outer Dia (D):3.1875; Inner Width (Bi):1.7500; Dynamic Load Rating (Cr):93,290; Bearing number:GEZ50ET-2RS; Material:52100 Chrome steel,; Max. housing corner radius, or 45 deg. chamfer (ch):0.040; Static Load Rating (Cor):224,795; Outer Diameter (mm):80,9625; Brand:AST; |
| EX100-1 Excavator HITACHI Double Row Slewing Bearing 1195*962*86mm | Brand:SNR; Width (mm):18,2; D:21 mm; Size (mm):14x21x18.2; Bore Diameter (mm):14; Outer Diameter (mm):21; Bearing number:TNB44261S01; d:14 mm; |
| I.1000.22.00.A-T Internal Gear Slewing Ring Bearing(999*828*82mm) For Excavator And Crane | Grease lub.:4200; Bearing number:K65X73X23H; (Refer.)Mass(kg):0.091; Weight:0.091 Kg; Housing(min.):73.010; P/S:S; Basic static load rating (C0):97.7 kN; Ew:73 mm; Bore Diameter (mm):65; EAN:0605790269165; |
| 16325001 No Gear Slewing Ring Bearings (95*82*4inch) For Military Turrets | Cage Type:Stamped Steel; Cg - Geometry Factor:0.0781; K - Factor8:1.6; C1 - Dynamic Radial Rating (1 million revolutions)6:23500 lbf; Aa - Cage-Cone Backface Clearance:0.04 in; a - Effective Center Location4:-0.34 in; Cone Part Number:3490; R - Cone Backface To Clear Radius3:0.14 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:41000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:3820 lbf; |
| Supply VSA250855N Four Point Contact Ball Slewing Bearing 755x997x80mm | Category:Single Row Ball Bear; finish/coating:Uncoated; Basic static load rating (C0):73 kN; Fatigue limit load, Cu:2.33 kN; Characteristic outer ring frequency, BPF0:11.67 Hz; rs min:1.1 mm; C:22 mm; maximum rpm (oil):3000 rpm; snap ring included:Without Snap Ring; Bore Diameter (mm):180; |
| 585DBS102y Four-point Contact Ball Slewing Bearing With Innter Gear | Bearing number:23068-K-MB-W33; Size (mm):340x520x133; Calculation factor (Y1):2,7; D:520 mm; Limiting speed:1300 r/min; B:133 mm; Brand:NKE; d:340 mm; r2 min.:5 mm; Calculation factor (Y0):2,6; |
| XRB60040 Cross Roller Bearing Size 600x700x40mm | Weight / LBS:74.957; Dynamic load, C:315 kN; (Oil) Lubrication Speed:1 100 r/min; Bore Diameter (mm):460; Long Description:460MM Bore; 580MM Ou; ra max:2.5 mm; Snap Ring:No; Characteristic inner ring frequency, BPFI:11.81 Hz; Cage Material:Steel; |
| VLA200944 Bearing | Fw:28,575 mm; B:25,4 mm; Size (mm):22.225x41.275x25.4; Bearing number:HJ-182616+IR-141816; Basic static load rating (C0):51,5 kN; C:25,4 mm; Weight:0,25 Kg; Basic dynamic load rating (C):35,5 kN; ra max.:1 mm; Outer Diameter (mm):41,275; |
| 130.45.2000 Slewing Bearing 1779x2221x231mm | Bolt Qty:2; J:450.00 mm; C0 Static Load Rating:1660; G:M30; Bearing:23230; Jmax:457 mm; Shaft Diameter db:165 mm; C1 Dynamic Load Rating:1270; Material :Cast Iron; Max Grease Speed:1400; |
| R55-5 Excavator HYUNDAI Double Row Slewing Bearing 800*573*70mm | Ew:182 mm; Fw:148 mm; d:130 mm; r1 min.:1.1 mm; Brand:NACHI; Weight:3.77 Kg; Bore Diameter (mm):130; Basic static load rating (C0):217 kN; B:33 mm; Outer Diameter (mm):182; |
| 10-201091/0-02073 Four-point Contact Ball Slewing Bearing 1022/1166/56mm | dn:16.5 mm; Calculation factor - Y0:0.38; Preload class B GB:80 N; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor f2B:1.03; Calculation factor - fHC:1; d2:14.5 mm; r1,2 min.:0.3 mm; Gref:0.28 cm3; |
| 40 mm x 80 mm x 23 mm Crossed Roller Slewing Bearing RKS.160.16.1424 | LangID:1; Da max.:337 mm; Outer Diameter (mm):360; DA_:57.15; C_conv:325000; D_:360; B:72 mm; bomp:0; SBRG:3; Bearing number:6334; Size (mm):40 mm x 80 mm x 23 mm ; |
| RFQ XI 503500N Cross Roller Bearing 3200*3690*138mm | Oil Lubrication - M/N Seal:2400 rpm; Grease Lubrication - B/C/O Seal:1800 rpm; C0 - Static Load:26600 lb; Housing Style:Two-Bolt Pillow Bloc; Dimension RA:0.24 in; Dimension F:8.88 in; Y2 - Geometry Factor:4.23; Grease Lubrication - T Seal:3550 rpm; Weight:13 lb; Shaft Size :2 in; |
| 124.28.900 Slewing Bearing 778x1022x82mm | T:17 mm; S:2 mm; Z:62 mm; R:33 mm; L:31 mm; A:100 mm; M:78 mm; P:2 mm; d:20 mm; U:21,5 mm; |
| 4000050-006 Manitex Boom Truck Slewing Ring | Brand:FAG; r1 min:1,5 mm; C0r:208000 N / Static lo; nG:6500 1/min / Limitin; Bearing number:NJ2215-E-TVP2 + HJ22; B1:7 mm; Cr:192000 N / Dynamic l; ra max:1,5 mm; m:1,64 kg / Weight; da max:87 mm; |
| E.1200.20.00.C Slewing Bearing With Outer Gear 984x1198.4x56mm | da min:52 mm; (Grease) Lubrication Speed:8 700 r/min; D:85 mm; Brand:NTN; Minimum Buy Quantity:N/A; r1a max:0.6 mm; Product Group:B04270; db min:49,5 mm; Rolling Element:Ball Bearing; Noun:Bearing; |