| No. | Brand | b | B | e | f | m | s | Q | X |
| RAK1 | Timken | - | 72 mm | - | - | - | - | - | - |
| GT0061-2440, | Rexroth | - | 165 mm | - | - | - | - | - | - |
| 45BWD07 | NSK | - | - | - | - | - | - | - | - |
| TRBF31C1101-A | INA | - | - | - | - | - | - | - | - |
| (M-NF25F14001) | - | - | - | - | - | - | - | - | - |
| ZX10R | NTN | - | 40 mm | - | - | - | - | - | - |
| IP20 | - | - | 75 mm | - | - | - | - | - | - |
| 423 | Rexroth | - | 37 mm | - | - | - | - | - | - |
| (Zhv22) | - | - | - | - | - | - | - | - | - |
| 220g | INA | - | 19,05 mm | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 1070076877 | Rexroth | - | 65 mm | - | - | - | - | - | - |
| A8V80 | - | - | 165 mm | - | - | - | - | - | - |
| (Zhv74) | - | - | - | - | - | - | - | - | - |
| 915X2150 | - | - | - | - | - | - | - | - | - |
| 310SFFC | TRW | - | - | - | - | - | - | - | - |
| ta3720z | IKO | - | - | - | - | - | - | - | - |
| 404 | Danfoss | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 2016 | - | - | 21,839 mm | - | - | - | - | - | - |
| ZX200-3 | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 14sb, | John Deere | - | - | - | - | - | - | - | - |
| 1318S | NTN | - | 15 mm | - | - | - | - | - | - |
| MT50 | - | - | - | - | - | - | - | - | - |
| RNA4916 | koyo | - | - | - | - | - | - | - | - |
| 21 0541 01 Light Series External Gear Slewing Ring Bearing(640*434*56mm)for Stacking Robot | C1:22 mm; d2:60 mm; d:25 mm; W:M24x2; l4 max.:124 mm; Weight:0,81 Kg; d4:33,5 mm; Bearing number:TSF 25; Basic dynamic load rating (C):47 kN; dk:42,85 mm; |
| RB6013 XRB6013 Cross Roller Bearing Size 60x90x13 Mm XRB 6013 RB 6013 | d:60 mm; Size (mm):60x110x22; Width (mm):22; D:110 mm; Brand:ISO; Bore Diameter (mm):60; B:22 mm; Outer Diameter (mm):110; Bearing number:20212 K; C:22 mm; |
| RKS.061.30.1904 Four Point Contact Slewing Bearings(2073*1796*68mm) With External Gear Teeth For Steel Plant | Seal Type:Felt Type; Dimension J:7.1 in; Bolt Size:2 x M12; Bearing Type:Split Cylindrical Ex; Cr - Dynamic Load Rating:14613 lbf; Dimension H1:0.9 in; Dimension H2:5.4 in; Housing Width:3.3 in; Dimension M:2.4 in; Pillow/Plummer Block Style:Split Cylindrical Ho; |
| NK110 Kato Crane Swing Bearing Slewing Ring Bearing | Bore Taper:1/12; Da - Outer Ring Backing Diameter:566.000 mm; Cage Type:YMB; C0 - Static Radial Rating:7580000 N; R - Inner Ring To Clear Radius1:4.000 mm; Y1 - ISO Factor5:3.39; d:380.000 mm; r - Outer Ring To Clear Radius2:4.000 mm; Reference Thermal Speed Rating (Oil)7:560; D:620.000 mm; |
| 12780001 No Gear Slewing Ring Bearings (38.201*27.75*2.875inch) For Aerial Lifts | Bore:0.787 Inch | 20 Mill; Mass bearing:0.051 kg; r1,2 - min.:0.3 mm; Bearing number:16004; Fatigue load limit Pu:0.173 kN; Calculation factor f0:14.9; Category:Single Row Ball Bear; Manufacturer Item Number:16004; Product Group:B00308; |
| 02 2618 00 Slewing Ring Bearing | Lubrication Type:Non-Relubricatable; Dynamic Load Rating:8740 lbf; Seal Type:Molded Shroud; Angle between Set Screws:90 º; Material:Bearing Steel; Sub Series:RAE..RR; Series:Standard; Set Screw Size:M10x1.5; Shaft Size d:1.969 in; Outside Ring Width C:22.000 mm; |
| 16278001 Internal Gear Slewing Ring Bearings (94.173*77.008*7.126inch) For Mining Equipment | d:20 mm; C:14 mm; Width (mm):14; B:14 mm; r min.:1 mm; Outer Diameter (mm):47; Bearing number:6204L11DDU; D:47 mm; Size (mm):20x47x14; Brand:NSK; |
| 134.50.3150.12 Slewing Bearing 2868x3542x270mm | B1:12.5; Bore Diameter (mm):15; Pmax:3900; Weight:0,011 Kg; NC-DA:0; Width (mm):12; d1:12; N-SDM:0; Brand:NSK; NC-RAC:0; |
| L9-53N9Z Slewing Bearing(59.06*47.76*3.54inch) With Internal Gears For Industrial Turntables | Outer Race Width:0.748 Inch | 19 Mill; Inch - Metric:Metric; Outer Diameter (mm):72,000; Category:Insert Bearings Sphe; bearing material:Through Hardened Ste; Inner Race Profile:Standard Inner Ring; Bore:1.181 Inch | 30 Mill; snap ring included:Without Snap Ring; cage material:Steel; D:72,000 mm; |
| BFKB353251/HA4 Crossed Roller Bearing | Eng Internal Radial Clearance - Min:0.0016; Shaft Size Type:Metric; Eng Internal Radial Clearance - Max:0.0026; Locking Style:Double Concentric; Dimension N:2.630 in; Bearing Number:22211; Pre Install Clearance Min:0.0016 in; Dimension D:5.130 in; Engineering Group:Mounted Bearing; Grease Lubrication - M/N Seal:2200 rpm; |
| VSA200414-N Light External Gear Type Slewing Ring Bearing(503*342*56mm)for Industial Automation | C0 - Static Radial Rating:28100 lbf; e - ISO Factor8:0.4; db - Cone Backface Backing Diameter:2.87 in; da - Cone Frontface Backing Diameter:2.87 in; Aa - Cage-Cone Backface Clearance:0.05 in; T - Bearing Width to Flange:0.3120 in; Cup Part Number:394AB; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:3970 lbf; Design Units:Imperial; K - Factor7:1.45; |
| Crossed Roller Slewing Bearing RKS.160.14.0644 | Outer Diameter (mm):85; (Grease) Lubrication Speed:22 100 r/min; D:85 mm; Basic dynamic load rating (C):14 kN; Brand:NSK; d:60 mm; Bearing number:60BER29HV1V; Weight:0,208 Kg; C:16 mm; Bore Diameter (mm):60; |
| CRBH9016AUUC1 Precision Cross Roller Bearing | Outer Diameter (mm):100; Bore:2.756 Inch | 70 Mill; Radial Clearance:0.010 to 0.030 mm; Outer Race Width:0.63 Inch | 16 Milli; d:70 mm; Width (mm):16; Category:Single Row Ball Bear; Weight / LBS:0.72; Rolling Element:Ball Bearing; |
| NRXT30035DD Crossed Roller Bearing | Da max.:56.4 mm; Enclosure:Open; Fatigue load limit - Pu:0.67 kN; Maximum Capacity / Filling Slot:No; Calculation factor f0:13.1; outer ring width:20.637 mm; Cage Material:Steel; Long Description:1-1/8" Bore; 2-; Keyword String:Ball; internal clearance:C0; |
| MTO-324X No Gear Slewing Ring Bearings (20.486*12.77*2.375inch) For Work Positioners | Shaft Size :100 mm; Float:0.083 in; Dimension B:9.47 in; Oil Lubrication - B/C/O Seal:600 rpm; Oil Lubrication - M/N Seal:900 rpm; Oil Lubrication - T Seal:1700 rpm; Engineering Group:Mounted Bearing; Locking Style:Double V-Lock; Dimension F:16.00 in; Housing Style:Two-Bolt Pillow Bloc; |
| 9E-1Z14-0254-0862 Crossed Roller Slewing Bearing With External Gear 180/342/42mm | Static Load Rating:4,900 N; D:58 mm; Factor fo:16.1; d:45 mm; Weight:0.040 kg; Da (max):56 mm; Dynamic Load Rating:5,350 N; Bore Type:Cylindrical Bore; ra (max):0.3 mm; Radial Clearance:0.006 to 0.023 mm; |
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
1787/700 Slewing Bearing 700x880x65mm Video